European Turn Signals


European Turn Signals

 

         To install your new turn signals open your hood and look behind your driver side headlamp. You should see the spring that retains the front turn signals. Using a long screw driver or similar instrument pull back on the spring to release the front turn lamp. Once the spring is out of its "V" shaped groove you should be able to pull the lamp out and place it on the bumper. Press in on the connector and remove the lamp from the wiring harness. You also need to reuse the spring on the old lamp. Reinstall the new lamp in reverse order.

 

Sponsored Links:


Volvospeed assumes no responsibility for any damage done to your car. All modifications are done at your own risk.
Copyright 1999-2007 Volvospeed. All rights reserved.