Headlight Installation
All four bulbs should install on a 94+ Volvo with no problem with the possible exception of the right low beam head light. A good way to gain more access to this area is to remove the lid of the ECU case and swivel it to the side. A screwdriver may aid in removing the outer most fastener. Once that is done you may also remove the diagnostic connection circled in blue. To accomplish this just lift it straight out of its bracket circled in red. Note, your car may not look like this. If your car is equipped with the "immobilizer system" you are better off to install the bulb without removing any ECU related parts.
High Wattage Back-up Bulbs
This shot is taken with the stock bulbs in place. The dog is positioned 7 meters behind the car.
This picture was taken after the the new bulbs were installed. You can clearly tell a difference. No filters or photo editors of any kind were used.
Can you tell the OEM bulb from the Aftermarket one?
High wattage bulbs produce more heat!
Volvospeed assumes no responsibility
for any damage done to your car. All modifications are done at your own risk.
Copyright
1999-2000 Volvospeed. All rights reserved.