So this message comes up on
your display. It means one of your tail
light bulbs are burnt out. However you checked but they all seem to
work? This little tutorial will walk you through resolving the error
message.
This is a
picture of the LH tail light notice that there are 2 bulbs glowing one
on the outside and one on the inside, while in the RH tail light you
will notice there is only 1 bulb glowing on the inside and nothing on
the outside.
To
replace that bulb. Open the trunk and on the RH side(LH side is the
same) open the panel with the thumb screw like in the above picture
Now you can see the back of the
tail lamp and the bulb holders. Lightly
squeeze on the side tab and pull the holder out of the tail lamp.
With
the holder removed I recommend replacing both bulbs at the
same time that way your not doing the other one a week later. Just push
down and rotate the bulb out. The bulb number is 5007. Now
just put it all back together and your tail lamp should now show 2
bulbs glowing like above.
