Jaz Catch Can

---

Rating scale is from 1 to 10. Low being 1 high being 10

Rating: 8.3
Once again this modification is for off road use only. If your car is driven on the road you should not perform this modification. If time and care is taken when installing the Jaz breather, you will have a very professional and functional piece. For the track this is a must, as most tracks no longer allow drivers to run draft tubes or open breather filters.

Fit: 6
Unless you want to run fuel safe hose all over your engine bay, it can be hard to find a place to mount this unit. The size is very similar to a can of soda. The other thing to remember when looking for a mounting location is ease of access. Depending on the condition of your engine the catch can should be emptied every few thousand miles. Click here for installation instructions.

Finish: 9
The construction of this piece is very impressive. The catch can is actually an injection molded thermoplastic container. All the fittings can swivel, and the drain on the bottom makes maintenance easy. The only modification was to polish the mounting bracket and cut it down a little so you would not see that much of it.

Performance: 10
While this product does not have a true performance improvement, it does do exactly what it is advertised to do. The main reason to run a catch can is to prevent oil from entering your intake as well as everything on the way including the intercooler. The advantage of a catch can breather combo over just a breather, is that hot oil does not get sprayed all over your engine. Less oil in your intake means less chance for detonation. This set up also eliminates back pressure from the head created by blow by gasses.

Note: I will publish any issues as they arise.

***Off-Road Use Only***