Ok, so Im driving along nice and easy. Then, I need to punch it to get out of the way of some MORON in San Antonio. I down shift (5 speed) and punch the gas. The car pulls away like it always has, but then the car lurched forward. I checked the gauges, the boost gauge was in full vacuum, the RPMs held steady.
I took my foot off the gas, and it seems that power was restored. It does this only at 3/4 or more (per gauge) boost as I am nearing 4k RPM. If i pop it in first and slowly raise the RPMs, I can get it to the red line without issue, its only under heavy throttle and boost.
I took off the hose that connects the AMM to the turbo, it is weak and flimsy near the connection at the turbo.
I have checked vacuum lines, all seem ok.
Can the hose be collasping due to the vacuum created by the air moving into the turbo?
I should add that the car drives FINE in every day driving, its ONLY under full throttle I have this issue.
No other problems, smooth idle, easy start, no smoke.
Page 1 of 1
92 740 Turbo Cuts out at full throttle
#4
Posted 02 July 2009 - 04:13 PM
Meh, I have the new hose coming from the indie today. I had another 740 turbo, same problem, same fix. *FIngers crossed*
Also, I noticed my wastegate rod clip was broken, and in the process of trying to get a new one in, the rod has slipped off the wastegate connection. Easy fix? I cant lift the car, and I cant see it from the top...
Also, I noticed my wastegate rod clip was broken, and in the process of trying to get a new one in, the rod has slipped off the wastegate connection. Easy fix? I cant lift the car, and I cant see it from the top...
'98 s70 5 Speed with s60 turbo rims, looks nice!
#5
Posted 03 July 2009 - 03:23 AM
It' just a simple hitch pin like this:
https://www.gqfmfg.c...atalog/1688.jpg
Should be able to buy a replacement at almost any hardware store.
https://www.gqfmfg.c...atalog/1688.jpg
Should be able to buy a replacement at almost any hardware store.
Page 1 of 1

Sign In
Register
Help
Start a new topic
Add Reply


MultiQuote


