To anyone who has an M66 in their 850 (I'm guessing you're on the other side of the pond): What passenger CV shaft are you using? The one the seller told me to get ('00+ V70 AWD) is not the right one. It looks like I need to order a '99 V70AWD, and mate that to the 850 one. Thanks.
0
4 replies to this topic
#1
-
- Lifetime Supporter
-
- 3,194 posts
Level 4 Member
- Gender:Male
- Location:New Orleans, LA
- Crew:___
#2
-
- Gold Member
-
- 29,896 posts
MILFSPEED
- Gender:Not Telling
- Interests:Demo Sawing your Volvos Up
- Location:( . Y . )
- Crew:NEC
Posted 03 November 2009 - 10:34 PM
IIRC your should be using a 98 XC shafts
Ask lookforjoe he would know
2004 V70XC 2001 S60 T5M 1998 C70T5 M56 1998 S70T5 M56
#3
-
- Lifetime Supporter
-
- 7,810 posts
Level 5 Member
- Gender:Male
- Interests:Making Stuff
- Location:New York
- Crew:NEC
Posted 03 November 2009 - 10:47 PM
...That would be correct, Justin.
You need a '98 XC/AWD rights side shaft - can't imagine WTF they were thinking on a later shaft - it has the wrong hub attach design. '98 shaft will bolt right up, the suspension/steering/hubs are the same as '98 (design wise, anyway)
If you're running FWD - you need the spline coupler too, or you'll have a very large puddle of trans fluid
You need a '98 XC/AWD rights side shaft - can't imagine WTF they were thinking on a later shaft - it has the wrong hub attach design. '98 shaft will bolt right up, the suspension/steering/hubs are the same as '98 (design wise, anyway)
If you're running FWD - you need the spline coupler too, or you'll have a very large puddle of trans fluid
1998 V70 XR M66 10cm2Hotside/Garrett 60-1 Built T5 Motor '03 Ported Head EnemY21Cams TurboTuner 710cc Inj, DP back Dual Magnaflow 14834's May 2011 355WHP(@6400rpm) 347WTq(@4400rpm)@22psi Now with LGSpeed Header & Custom Intake Manifold! BIG 31x12x3"FMIC Currently sporting a vented piston!!!
#4
-
- Lifetime Supporter
-
- 3,194 posts
Level 4 Member
- Gender:Male
- Location:New Orleans, LA
- Crew:___
Posted 05 November 2009 - 01:16 AM
Spline coupler was already installed. 
CV shaft is on its way. Thanks!
CV shaft is on its way. Thanks!
#5
-
- Gold Member
-
- 29,896 posts
MILFSPEED
- Gender:Not Telling
- Interests:Demo Sawing your Volvos Up
- Location:( . Y . )
- Crew:NEC
Posted 05 November 2009 - 01:38 AM
LEFT is for the tranny input works with
99 older 4 speed autos
M56
RIGHT is for 5 speed autos
now that input shaft is the same minus the shaft diamter for the M66 also.
since I would hope we all know the difference betwee awd and FWD shafts
Left AWD Right FWD
granted the FWD is a custom built one for my 01XC but ignore that part
2004 V70XC 2001 S60 T5M 1998 C70T5 M56 1998 S70T5 M56
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
