Engine came out of my 95 850 turbo, had low compression and burned some oil had 165K on it. I replaced it with a lower mileage engine. Perfect for a rebuild/build project, doesn't come with turbo. $250
0
2.3 T5 Engine
Started by Markymark, Feb 09 2010 01:08 AM
8 replies to this topic
#1
-
- Lifetime Supporter
-
- 489 posts
Level 1 Member
- Location:Beverly Hills,MI / East Lansing, MI
- Crew:MWC
Posted 09 February 2010 - 01:08 AM
95' 850 T5M
#2
-
- Members
-
- 958 posts
Level 2 Member
- Gender:Not Telling
- Location:Atlanta
- Crew:___
Posted 09 February 2010 - 02:27 AM
hhhhmmmmmmmmmmmmmmmmmm good price..........
shipping to 30071?
shipping to 30071?
01 Volvo S60 LPT powered by f*kedUPsolute
3" DP & back | ipd sways and links | WMI | Bilstein & Eibach sport | R - BBK | B&M Cooler | 19T | ipd CBV
#3
-
- Lifetime Supporter
-
- 489 posts
Level 1 Member
- Location:Beverly Hills,MI / East Lansing, MI
- Crew:MWC
Posted 09 February 2010 - 02:34 AM
rbodor3, on 09 February 2010 - 02:27 AM, said:
hhhhmmmmmmmmmmmmmmmmmm good price..........
shipping to 30071?
shipping to 30071?
I'm not sure how to get a quote for shipping for an engine but when I bought an engine from FL it was ~$300 for shipping if you can set something up I would be happy to have the engine shipped but like I said I really have no idea how to get a quote and set up shipping.
Mark
95' 850 T5M
#4
-
- Members
-
- 76 posts
Level 1 Member
- Location:Western Michigan
Posted 10 February 2010 - 06:15 AM
Bad rings? I need an engine for my 99R, but not looking for a drawn out project if there are bigger gremlins in it than worn rings
Jerry, it's Frank Costanza, Mr. Steinbrenner is here, George is dead, call me back!
#5
-
- Lifetime Supporter
-
- 489 posts
Level 1 Member
- Location:Beverly Hills,MI / East Lansing, MI
- Crew:MWC
Posted 10 February 2010 - 12:56 PM
natopotato, on 10 February 2010 - 06:15 AM, said:
Bad rings? I need an engine for my 99R, but not looking for a drawn out project if there are bigger gremlins in it than worn rings
That's what I'm thinking it was. If it helps about 2 months before I took it out it trapped 100 MPH in the 1/4 mile and the week before I took it out I drove it to Chicago and back so the engine runs fine just burns oil and had lower compression I swapped it out because I got a great deal on a lower mileage engine.
95' 850 T5M
#6
-
- Lifetime Supporter
-
- 489 posts
Level 1 Member
- Location:Beverly Hills,MI / East Lansing, MI
- Crew:MWC
Posted 23 February 2010 - 11:18 PM
Still for sale!
95' 850 T5M
#7
-
- Vendor
-
- 2,331 posts
Level 3 Member
- Gender:Male
- Location:Chicago, IL
- Crew:___
Posted 23 February 2010 - 11:29 PM
Markymark, on 23 February 2010 - 11:18 PM, said:
Still for sale!
I you meet me half way I may take it off your hands for $200. Thats what i paid for my last one.
1998 Volvo S70 T5M - 04 R Motor - T3 60Trim @ 19PSI - 3" Custom Exhaust - TT - FMIC w/ 3" piping - TA Coilovers w/ Custom Rears
#8
-
- Lifetime Supporter
-
- 14,092 posts
Earth day- Every day
- Gender:Male
- Location:Lex, KY
- Crew:___
Posted 24 February 2010 - 06:26 PM
Mark, call Old Dominion for a trucking quote. You ca find a pallet to strap it to at most grocery stores (you'll need to ask them if you can take one from their delivery dock obviously). Shipping isn't bad, but you want that things covered with a thick tarp and strapped down well.
Matt
MY97 855 Manual swap, Porsche Brakes, 16T on LPT block and plenty of IPD parts
MY05 XC90 2.5T AWD. Bone stock and staying that way.
#9
-
- Lifetime Supporter
-
- 489 posts
Level 1 Member
- Location:Beverly Hills,MI / East Lansing, MI
- Crew:MWC
Posted 24 February 2010 - 06:56 PM
matt b, on 24 February 2010 - 06:26 PM, said:
Mark, call Old Dominion for a trucking quote. You ca find a pallet to strap it to at most grocery stores (you'll need to ask them if you can take one from their delivery dock obviously). Shipping isn't bad, but you want that things covered with a thick tarp and strapped down well.
Thanks for the tip Matt, If I find a buyer who wants to ship it I will definitely ship it that way.
95' 850 T5M
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
