1) remove the cover under your steering column (3 screws)
2) find the relays (above the drivers left leg position)
3) pull the one on the bottom that is white labeled "213"
4) it will look like this on the bottom:

5) pull the white cover off it, it will look like this from the top:

6) Now heres the hard part, you need to slide the metal part out, it has tabs, now one side dosnt really matter if you keep the plastic mounting spot intact, but the otherone will help hold it in the new position, you need to pull it out and reinsert it like this:

7) install it all back again and PRESTO (you can also see the finished mesh grill I did on the lower valence):





















