Jump to content


FCP Euro

laird

Member Since 18 May 2003
Offline Last Active Today, 03:43 AM
-----

Posts I've Made

In Topic: Revised Tune & Newer Oil Pan W/Oil Cooler

Today, 03:46 AM

Why am I getting a vision of you with a four engined, white block powered swamp buggy?

In Topic: Custom Gunmetal Ronal R38 18X8 5X108 Alloys With Tires - Usd 800.00

Today, 03:43 AM

 Yellow95, on 28 May 2012 - 02:41 AM, said:

Do we guess if we are local? If we are right what do we win?
Does it rain where you are? You may be eligible.

In Topic: Rn Motor Install

Yesterday, 06:28 PM

I actually used the old seal as a drift.

In Topic: Revised Tune & Newer Oil Pan W/Oil Cooler

Yesterday, 08:08 AM

Kind of surprised he didn't just fab a water pump using the cold side from a GT35 and pump all that water to PA.

In Topic: Rn Motor Install

Yesterday, 05:02 AM

There is never time to do it right, always time to do it over.
Posted Image
Made a new fuel line bracket out of used main bearing. Cut down a bolt to fit in the back side of the water pump bolt hole. (Locktite). Not Hussien quality but it should work.
Posted Image
Put in another $37 worth of RMS and put the motor back in. Spent 10 minutes trying to get those silly bolts back into the front motor mount that hold the wiring harness. I should have just pulled the starter, it would have been faster.
Posted Image
I took the overflow tank mount off a car at the junkyard (drilled out the spot welds), cut it down a hair and welded her on.
Posted Image
I'll throw on some paint and it'll be fine as frog hair.

IPD Volvo Parts


Copyright 2012 Volvospeed