Leaderboard


Popular Content

Showing content with the highest reputation on 08/04/2020 in Posts

  1. 2 points
    Thanks for always taking the time to write up such details posts. I appreciate the insight & help greatly. I made some progress on the oil drain tonight. Ill post up a few pictures when I get things tacked up. I was able to use some 1" OD aluminum tubing to basically shoot the drain directly towards the firewall and then 180 around and switch to 12AN braided hose. It mains a downhill the entire time including when its going towards the fire wall and bending around the 180. The FWD 12AN drain to the oil pan was so much easier & worked so freaking well! Oh well though, there is a lot going on back there with the turbo and angle gear so its going to take some extra work. Thanks! I set him a message on Facebook.
  2. 1 point
    I wouldn't use corrugated tube - I did try that for a couple versions - the corrugations are not helpful for oil foam I just found a piece of thin wall aluminum tube that was a snug fit over the inlet - I never made a note of it, sorry Add the safety ground sleeve - and + - are reversed. Cut a small opening in the underside of the case near the bottom (not shown), since the DW has no secondary pickup for fuel residing inside the pump housing
  3. 1 point
    Thank Hussein! Yes the oil drain is something I need to continue playing around with. I found this piece which might order up and try. Its a flexible turbo oil drain. It might allow me to get a better angle off the turbo. Then I can weld on an AN fitting or something. https://www.summitracing.com/parts/bdd-1453106 On a side note... Hussein I kinda remember the mods you made to your AWD fuel pump sender to fit a DW300 but all of the links to the pictures are dead... from what I remember the pump outlet fits the sender fine, but you had to make a spacer on the pump inlet in order to hookup the strainer screen? Do you remember the ID of that spacer?
  4. 1 point
    Got the HRE 535's on. Need to drive it and get the suspension to settle. Also need to go beat on it since I have a track day on the 12th.