Supporting Member
  • Content Count

  • Joined

  • Last visited

  • Days Won

  • Feedback


BlackT5 last won the day on June 17 2018

BlackT5 had the most liked content!

Community Reputation

734 Excellent

About BlackT5

  • Rank
    NWC Rod Bender
  • Birthday 07/18/1915

Profile Information

  • Gender

Previous Fields

  • Location
    Victoria, BC Canada
  • Crew

Recent Profile Visitors

29,552 profile views
  1. BlackT5

    Sventastic's 850R Daily Driver Project

    Come try my IPD ECU :D
  2. BlackT5

    Andy's 2000 V70 R

    I used a 99 angle gear. I had originally bought cheap axles from IPD, the passenger one they offered at the time had seal locations for either 2000 or 99 angle gears. Both of those axles split boots so I just replaced them with OEM 99R axles that I pulled from my parts car. The problem I had initially was on the driver side. I had just bought the passenger axle thinking the 2000R driver side would work but it was totally different
  3. BlackT5

    Andy's 2000 V70 R

    2000R Angle gear wont work with M66 unless you can find a passenger axle that has the seal in the correct place. 2000R passenger axle won't fit M66
  4. BlackT5

    Andy's 2000 V70 R

    I would pick up a new one piece exhaust manifold gasket and throw it on since you're at this stage. Sorry I missed it Andy but why are you taking the pan off?
  5. New forged rods 139.5mm and forged Diamond racing pistons. 81.5mm Pistons were previously used but were sent back to Diamond to be checked, deburred, and coated on the tops and skirts. New rings and spiral locks. Rods are new and come with ARP 2000 bolts. 900US shipped Pictures to follow, or text me 25O-514-6O18 Also have my old downpipe/external wastegate setup. 3" downpipe with 18" vibrant resonator and vband flange on the end. No cat. Top has a 5 bolt flange that fits Garrett Gt/GTX turbos with the 5 bolt turbine housing with wastegate hole. Tial 40mm wastegate plumbed off it. I also have an S60R exhaust manifold with the flange milled flat and a .63 T3 turbine housing for a GT35r that will work with it all. Looking for $450US plus shipping. Fits 94-2000 FWD. Mark
  6. That's going to be a job a half! If only you had left your photobucket images, they would now still show.. just with the watermark
  7. BlackT5

    How Your Car Sits

    what happened to the motor rob?
  8. BlackT5

    Sventastic's 850R Daily Driver Project

    I just pulled the headliner on my 2000 V70R to swap the sunroof. It's really not too bad to get out.
  9. BlackT5

    Project Blackt5

    For a limited time.. fuckers
  10. BlackT5

    Project Blackt5

    Three year thread revival! For some reason I'm now seeing all my pics again, did photobucket actually relink 3rd party hosting? Are the pics loading for everyone else? I've been doing lots of work/overhauling my P2Rs the last few years but still driving my S70 in the summer. This year I decided to insure my T-5R for a few weeks prior to swapping insurance onto my S70 for the season. It's my only automatic car and feels funny, but its fun just to cruise in. It does look like the rear main is leaking so a manual swap might be in order :) I already have all the parts. I'm going to turn the boost up a bit on the S70 this year and get my exhaust rattle fixed. lol
  11. BlackT5

    Eriks 850

    Did I sell you that wheel? I can't remember :D
  12. BlackT5

    Simply T-5R, The Build Thread : A New Hope

    On my S70, cold start oil pressure is over 6 bar, hot idle is 1.5 bar and cruising varies. I'll try and keep an eye on the gauge when doing a pull on the way home today. My motor was built 13 years ago and has ~50k miles.
  13. BlackT5

    How Your Car Sits

    In the garage with the battery unhooked. The T-5R just sat for 18 months. I bought it but never actually drove it before. I have a bunch of batteries from all my different parts cars, so i'll typically throw in the best one I have. I often have to give them a bit of a charge first though.
  14. BlackT5

    How Your Car Sits

    Drove my T-5R for the first time Took my S70 out to get some groceries and blow the dust off. It's been parked since Oct. Replaced the passenger side axle in my Laser