
RussB
Supporting Member-
Content Count
2,529 -
Joined
-
Last visited
-
Hardwire Digital Delay, and a Barber B-Buff in a box that I put together, and my Bluesbird...
-
I rekon you missed my last comment... Oh, how I wish I could ride! I got the frame the day after I broke my wrist. I built that bike up with my left hand (I'm a righty) and a gimp right hand in a cast.
-
The frame on that Iron Horse I posted earlier in this thread had butta-soft dropouts, and the axles were bitching them up pretty bad. Here's my 19" Jamis Dakota AL frame I got from JensonUSA. The frame weighs in at 4.06 lbs with the seat collar. Build Specs... fork: Manitou Minute :03 100mm headset: Cane Creek S3 skewers: Salsa crankset: Shimano LX M-580 175mm rear derailleur: Shimano LX M-580 long cage, low normal front derailleur:Shimano LX M-570 top-swing shift/brake levers: Shimano LX M-580 dual control cassette: Shimano LX M-580 11-32T chain: Shimano HG-73 cables: SRAM Flak-Jackets br
-
Mikep, yes, those are BB7's... I just installed a 6" rear rotor & bracket, as the 8" rear was overkill, and about 140 grams heavier! We're big Oury grip fans here, been using them for 10+ years. My Kid just got some Lime Green one's for his Ibex
-
Here's my MTB, an Iron Horse Maverick with a few upgrades EDIT: the Maverick was dismantled, and now lives on a Jamis frame Here's my Son on his brandy-new Ibex Ignition... Here's my cobbled together El-Cheapo, buzz around the neighborhood bike, made up spare parts accumulated over the last decade or so,
-
without a doubt, pfeener always friendly and very helpful, not a popular "character" here, but he instills the essence of what this site is all about. AlvinL is right up there, too, but he's a Mod
-
Way too much pissing and moaning about these "Sigs" Help someone out with a Volvo-related problem, instead of crying about your precious pictures.
-
First death threats, now extortion. So much Hate
-
I am not computer savvy... What is my cache, and how do I clear it? :rolleyes:
-
panic ensues... :o
-
No YOU are :P
-
New "slaters", Quickbricks Motorsports Endlinks Cheap/swap
RussB replied to cargusjoh's topic in Member Announcements
carl, ...and then there's the way you "stuck" your SPAM into Greg's (Slater's) group buy thread :angry: -
Plz Help Asap. Tie Rod Wont Come Out From Wheel Hub Assebly Arm?
RussB replied to Deuss's topic in Member Announcements
WTF! you most likey mangled the tapered hole in the spindle. I don't know what to tell you except stay the hell away from it with a drill bit! If the tapered stud on the tie rod end doesn't fit snugly into its mating hole in the spindle, you will have to replace your spindle. Nice going <_<