andyb5

Lifetime Supporter
  • Content Count

    6,311
  • Joined

  • Last visited

  • Days Won

    145

Everything posted by andyb5

  1. Installed a set of Kaplhenke Racing delrin bushings in my subframe
  2. Thanks Mike! Do it! Can’t wait to see yours back on the road again Thanks!! That’s awesome, great use of your FLIR. Thanks for sharing that thread! I definitely plan to explore further into the temperatures of different engine bay components.
  3. Thanks you guys, appreciate it!
  4. Although this thing annoys me sometimes, it does clean up pretty nicely. I finally got around to editing some photos from this fall and wanted to share them since I think they do a great job of showing the how incredible this paint color is during golden hour.
  5. Replaced the faulty coolant temp sensor, cabin air filter, then washed it and enjoyed driving around on a nice warm spring day.
  6. A comparison between FWD and AWD is tough because the suspension is completely different. This means there’s no point in comparing the two spring rates. You want to compare how that spring rate gets applied to the wheels. So without knowing the motion ratio of each suspension setup, you can’t evenly compare the wheel rate. In this particular case, the awd IRS locates the spring further away from the wheel hub than the fwd delta link suspension. That increased distance means there’s a longer lever arm acting on the spring, so the awd spring needs to be stiffer to resist the wheel move
  7. Got a FLIR One as a birthday present from my fiancé and obviously I had to try it out on my car: Turbo + downpipe: These were taken after the car had been sitting for about 15 minutes after I got home.
  8. You always find the coolest cars Gary, excited to see your progress on this one!! I think a set of the OZ Ultraleggeras like your red T5M would be pretty sweet and show of the BBK nicely
  9. What are you looking to get for those calipers Gary? Here are pads for the GT2 calipers: https://www.zeckhausen.com/catalog/index.php?cPath=82_529&osCsid=sfuchj23rfn2h3sp8p907e2at2 If you can measure the piston sizes, they have replacement dust boots and pressure seals https://www.zeckhausen.com/catalog/index.php?cPath=82_1169
  10. Gary, can you post some closeups of the calipers? Kinda looks they’re either Brembo “Lotus/GT3” style calipers but could be the “GT2” style as well. Cant say I’ve seen that type of kit for these cars before, but there weren’t that many Brembo calipers around at that time period so that makes it easier https://www.zeckhausen.com/catalog/index.php?cPath=82
  11. Another vote for JRZ. FWIW - You can buy individual coilover assemblies from BC Racing so you could just buy the front BCs if you wanted something less pricey than JRZ or V3s
  12. No more stopping at a gas station to add air to my tires. I also bought a custom 3D printed handle to hang it from Dennis Smallbone Prints.
  13. Greg - I have 5K front springs on my front CX coils. They're kinda soft, not much firmer than stock. Ride is comfy, and handles decently, but definitely leaves something to be desired in terms of body control relative to other coilovers I've experienced on these cars. The AWD rear is completely different, so I wouldn't have any meaningful input on rates. Check out this thread from SS for some pretty good discussion on spring rates: https://www.swedespeed.com/threads/coilovers-spring-rates.610761/#post-7452217 If you're considering BC's, I'd really lean towards the digressively v
  14. Neither. Craig ( @tomcat) made the lip he’s talking about. He sold the molds to Volvo Composites.
  15. Absolutely ordering one to cover the scratches and damage on my rear bumper. Thanks for the link!
  16. That’s awesome. They’re a really well-made piece. In high school, I wanted to put one on my 98 V70 NA but my parents talked me out of it. So instead I upgraded the stereo
  17. I’m impressed you’re getting so much done this time of year! Looks like the floor repair came out really well, it’s barely noticeable in the last photos you posted.
  18. Some minor updates/incremental progress from the fall. Several years ago, I scored an OG metal mesh IPD grille from Adam @adamdrives and ran it on my 99 R for a short while before getting rid of that car. So after a few years in storage, I had a friend powder coat the grille for me. For those who remember, the original IPD grilles were either all silver or all black. I went with black mesh and a silver band as an OEM style play off the stock XC grille or the modified stock waterfall grille I had on the car. Since the IPD grille has a much thinner perimeter than the
  19. Snow globe-esque last night
  20. I'd be lying if I said that stretch of road doesn't live rent-free between my ears now. I finally got the monkey off my back and made the same drive around Christmas without issue. Yup, all good to go. It's been 6 months and not a hiccup (watch that be a jinx, fml). Rumor has it that both Re-Volv and Rolling Motors are expanding to bigger shops in the near future. Highly recommend you take a ride up and drop your wagon off. Plenty of other guys have done the same thing. Heck, Anthony ( @apeacock) drove his wagon over 6 hours to Ben's a few different times now.
  21. Okay, story time. Fast forward 2 months after having my injectors cleaned and serviced (see post above) and I'm about 1 hour into the 200 mile, 3+ hour drive from my parents house in RI back to my place in NY. If you remember, the last time I made this drive, I popped a tire on a pothole and it took 5 hours to drive the rest of the way on the donut spare. I drove past the area where I got the flat tire and think that was the worst drive home I've ever had. Well, I sure jinxed myself.... I'm cruising along at 65-70 mph and my car starts feeling down on power. I'm mildly confused, but n
  22. It’s a pretty common swap on the RWD cars. DeeWorks sells a bolt-on adapter https://www.deeworks.ca/product/960-850-p1-throttle-body-adapter-to-p2-intake/
  23. 😂😂😂 it could be all the spam bots that post here
  24. Anyone else taking advantage of BF/CM deals right now? I bought a 3 pack of M12 batteries (2/4/6 AH) and a hole saw set in a packout case from Home Depot. Then bought a whole bunch of maintenance stuff from FCP - a new set of endlinks, a new TCV, a set of spark plugs, a fuel filter, and a TRW steering rack.
  25. Stock harness is #9438738. IPD has it for $26.75 right now. Probably worth shopping around a bit.