mrjacobrussell

Members
  • Posts

    21
  • Joined

  • Last visited

Recent Profile Visitors

2,631 profile views

mrjacobrussell's Achievements

Newbie

Newbie (1/14)

0

Reputation

  1. Do you still have this pictures of the swap ? do you know where I can get a parts list? my sons 00 xc needs a trans and this sounds like a great option!

  2. Can we use regular Wikipedia? Wheresgeocitys when you need them ? Also, I suggest you change the wiring of the voltage step up device. the switch should be on the b8 not a27. This would allow you to adjust the voltage in the car without putting the car in boot mode.
  3. I think there is an issue with the wiki link, for the voltage stepper its not bringing up the correct page http://volvospeed.com/vs_forum/topic/159506-tuners-rejoice-free-tuning-for-m44/page-232#entry2362282
  4. Is the new auto bin out? I can test. I also have a bench soldering iron if I need to mod my ecu.
  5. So ive been messing around with this a bit I used the "18psi " map boost control maps to modify my map. I am unable to get more than 14 PSI and typically a sustained 12 psi. The car pulling harder than before, though. Is it suggested to get a boost controller and bypass the stock system? Also, I can't find a section for SAS and I'm wanting to pull mine off. I will be building a a new 2.5 or 3 inch down pipe myself. Sorry I have another question, is there a decel enrichment setting? This could greatly cut fuel consumption!
  6. Wow, seems like a lot is going on with this project. Is the information getting updated in the wiki?
  7. I was able to flash the auto v70r back with 607 but I cant get the Ppart file to flash it always fails. can anyone explain why?
  8. So I accidentally installed the 608 Bin instead of the 607 on my automatic 98v70r Just now realized it.. Would this be why when I boost the check engine light is flashing? Also, do I need to change any settings to make sure my injection settings are right on my car with the 607 file?
  9. yeah there is so much info on the motronic, I guess I was confused on the different software used to datalog.
  10. Guys i am really bummed I have this 4.4 flashed but I see all of these posts about the ecu being to slow to data log. How are you tuning? I am spoiled my Megasquirt and Megatune doing it for me, but I remember the old days of logging and tuning by hand.
  11. Is the 607 a t5 file? I guess I am worried about differances in settings from LTP to HPT t5/R in the 98 R
  12. Okie dokie, I have my LPT me 4.4 ECU purchased off ebay. Can anyone suggest a map that should be used for my 98R as I understand it my R should be the same as a T5 engine. im a bit confused as there are so many xdf and BIN files out there. Again my plans are to remove sas system, kill the second o2 sensor and bump the boost a little maybe 14 psi ? I will be running a complete free flow exhuast no CAT and planing on a 3 inch to dual 2.5 outlet. Oh and I believe I have the White injectors = 350 CC (MY1997 + R's)
  13. Thanks so much for the advice , I was hoping to get the maps them selves and export. I just dont want to have to adjust whats on the 850 map when really right now I just want to start with deleting the o2 and sas. Am I miss understanding the way tuner pro works? I was under the impression that you cant read the stock ecu maps only burn to the ECU . That is why I wanted a factory set up maps. I thought the injectors and boost maps would all be differant ? Ive been too busy to pull the laptop out and download the app and mess with it but I should have my ECU and switch in the mail soon. I scored a 98 xc ecu and a 3rd row seat and belts for the wifes 2000 xcse for $175 total on ebay !