Jump to content


FCP Euro

Flat Black Wheels


37 replies to this topic

#1 volvonez

    Level 1 Member

  • Members
  • Pip
  • 93 posts
  • Location:Brazil

Posted 30 July 2008 - 09:15 PM

Well ... i found this 850 turbo's wheel in a junkyard so i bought it ... i didn't have money to pay the painting ... that is about U$140 here in brazil ... so i bought myself 2 cans of Flat Black High temperature Spray and i painted myself the wheels ... i think it looks pretty good ... and i want to you guys tell me what you think about it !

Here is the pics




I also Painted 1 Dark Gray To see What it looks like



Here what it Looks Like Now cool.gif




#2 Chilled Man

    MILFSPEED

  • Gold Member
  • 29,898 posts
  • Gender:Not Telling
  • Interests:Demo Sawing your Volvos Up
  • Location:( . Y . )
  • Crew:NEC

Posted 30 July 2008 - 09:17 PM

I like the gray one better.

never been a fan of flat black anything
2004 V70XC 2001 S60 T5M 1998 C70T5 M56 1998 S70T5 M56

#3 Distort

    Level 1 Member

  • Members
  • Pip
  • 438 posts
  • Location:Houston, Texas
  • Crew:___

Posted 30 July 2008 - 09:28 PM

I wouldn't take candy from anyone driving THAT car...

dumpt 1990 765


#4 volvonez

    Level 1 Member

  • Members
  • Pip
  • 93 posts
  • Location:Brazil

Posted 30 July 2008 - 09:31 PM

QUOTE (Distort @ Jul 30 2008, 06:28 PM) <{POST_SNAPBACK}>
I wouldn't take candy from anyone driving THAT car...

laugh.gif laugh.gif biggrin.gif
The Police already stopped me last week LOL .... i think the car is looking a little Mafian LOL

#5 HtownTurboBrick

    Level 5 Member

  • Supporting Member
  • 6,213 posts
  • Gender:Male
  • Location:Houston, TX
  • Crew:___

Posted 30 July 2008 - 09:53 PM

better daytime pics with full shots of the car would be easier to judge. i think the dark gray would look pretty good.
~Jon AKA: the ddrunkn trigr hapy pumckin~
- '98 S70 T5M w/ '00 R motor swap 266whp/340wtq on 16T - 98' S70 T5 Black: Former DD new project - 96' 850 GLT -
RIP Joe Ng 02/29/56-08/18/05...

#6 ShadowVolvo01

    Level 1 Member

  • Members
  • Pip
  • 113 posts
  • Gender:Male
  • Crew:___

Posted 31 July 2008 - 02:39 AM

Not bad for a rattle can. Did you prep them good?

#7 °°KOLBAS°°

    Level 4 Member

  • Lifetime Supporter
  • 4,284 posts
  • Gender:Male
  • Interests:whores
  • Location:Kangarooland
  • Crew:___

Posted 31 July 2008 - 03:00 AM

looks good bro, i think the dark grey would look nicer but on ur sweet ride.

Posted Image

http://twitter.com/#!/oli_kolbas http://twitpic.com/photos/oli_kolbas


"If you ain't high by 2PM, Go f**k yourself" - Joey 'CoCo' Diaz


#8 Aftermidnight

    Level 1 Member

  • Members
  • Pip
  • 303 posts
  • Gender:Male
  • Location:Charlotte, NC
  • Crew:___

Posted 31 July 2008 - 03:17 AM

QUOTE (HtownTurboBrick @ Jul 30 2008, 05:53 PM) <{POST_SNAPBACK}>
better daytime pics with full shots of the car would be easier to judge. i think the dark gray would look pretty good.


please please please more pics I have been thinking of doing my Columba's in black and could not find any pics. biggrin.gif
95850T5

#9 Aftermidnight

    Level 1 Member

  • Members
  • Pip
  • 303 posts
  • Gender:Male
  • Location:Charlotte, NC
  • Crew:___

Posted 31 July 2008 - 03:32 AM

I've got 2 cans of Satin Black wheel paint (not too shiny or flat) waiting to use. laugh.gif


also can we see your front grille. Thanks. cool.gif
95850T5

#10 Aftermidnight

    Level 1 Member

  • Members
  • Pip
  • 303 posts
  • Gender:Male
  • Location:Charlotte, NC
  • Crew:___

Posted 31 July 2008 - 11:48 AM

are you still looking for an OEM Spoiler with brakelight, I may have one to trade (it is red in excellent condition and has a new mounting kit). Maybe trade for that 850 eggcrate grille, and something else (mudflaps, maybe rubber floormats, trunkmat, etc). Let me know. smile.gif
95850T5

#11 Aftermidnight

    Level 1 Member

  • Members
  • Pip
  • 303 posts
  • Gender:Male
  • Location:Charlotte, NC
  • Crew:___

Posted 31 July 2008 - 11:53 AM

QUOTE (Aftermidnight @ Jul 31 2008, 07:48 AM) <{POST_SNAPBACK}>
Maybe trade for that 850 eggcrate grille


with slash. If interested send me some pics. Thanks. cool.gif
95850T5

#12 Zeno

    Level 1 Member

  • Members
  • Pip
  • 107 posts
  • Interests:Volvos
  • Location:Brazil

Posted 31 July 2008 - 12:14 PM

Taking advantage of this post, this is how I've done my car, but I paid for it, the flat black car above from this post is my brother's car..




S70 T5 98 - VOLVO - For Life
96.000 Km - Curitiba City - Parana State - Brasil
Hids for the low beans and hids in the fog, New Projector on the way

#13 JC 855 GLT-R

    Level 5 Member

  • Lifetime Supporter
  • 5,404 posts
  • Gender:Male
  • Interests:volvos obviously, benzs too, snowboarding, modifying things and tinkering with things...
  • Location:Mays Landing, NJ or Pottstown, PA
  • Crew:NEC

Posted 31 July 2008 - 12:20 PM

dark grey gets my vote. the car needs a little contrast

Posted Image
1993 Mercedes-Benz 190e 2.3 91k still broken
1996 Volvo 855 GLT-R 320+k and going ( Project GLT-R)
1998 Subaru Outback SUS -Daily Driver
Volvo for LIFE......


Parts for sale


#14 volvonez

    Level 1 Member

  • Members
  • Pip
  • 93 posts
  • Location:Brazil

Posted 31 July 2008 - 12:40 PM

QUOTE (Aftermidnight @ Jul 31 2008, 08:48 AM) <{POST_SNAPBACK}>
are you still looking for an OEM Spoiler with brakelight, I may have one to trade (it is red in excellent condition and has a new mounting kit). Maybe trade for that 850 eggcrate grille, and something else (mudflaps, maybe rubber floormats, trunkmat, etc). Let me know. smile.gif


Whats up .... hey i would love the spoiler but there is this little problem ... that i live in Brazil . . . can you check how much would be the shipping ? do you think if you cut in the half i'll be abble to stick it twogueter again ?


about the grille i got an hot tip to you... you buy an eggcrate grille at e-bay for U$100,00 (They might make an discount if you e-mail them) http://cgi.ebay.com/ebaymotors/VOLVO-850-S...emZ350083971000 then you get the original emblem ... and break the little pins that it has behind.... then you buy some 3M "emblem mounting tape" ... and put all over
Once the slash is covered with tape, dry fit the slash to the center of the eggcrate grille, making sure it is level and centered. To help place the slash where it belongs once you peel off the tape backing, you can note where the slash will go by marking the frame of the eggcrate grille with a small piece of masking tape, pencil, etc. .... Once you know where the slash will go, peel off the tape backing and attach to the eggcrate grille. Press all over the slash firmly to make sure the slash is attached well. You can even gently attach c-clamps or similar tools to help hold the tape down until the adhesive sets up. Wait 4+ hours before reinstalling the grille .... after that .... TADA !!

#15 volvonez

    Level 1 Member

  • Members
  • Pip
  • 93 posts
  • Location:Brazil

Posted 31 July 2008 - 12:50 PM

QUOTE (HtownTurboBrick @ Jul 30 2008, 06:53 PM) <{POST_SNAPBACK}>
better daytime pics with full shots of the car would be easier to judge. i think the dark gray would look pretty good.


QUOTE (Aftermidnight @ Jul 31 2008, 12:17 AM) <{POST_SNAPBACK}>
please please please more pics I have been thinking of doing my Columba's in black and could not find any pics. biggrin.gif

Here you go



There is a topic about my car in the show room here is the link:
http://volvospeed.com/vs_forum/index.php?showtopic=100811


QUOTE (ShadowVolvo01 @ Jul 30 2008, 11:39 PM) <{POST_SNAPBACK}>
Not bad for a rattle can. Did you prep them good?


Not really ... i just painted over the original paint ... i spent like 3 hours ... lol i didn't even wait the paint dry ... flat black spray ... dries REALLLY fast ! you wouldn't believe how fast ...

#16 Mogatu'r

    Shiny Performance Racing.

  • Members
  • PipPipPip
  • 2,875 posts
  • Gender:Male
  • Location:Houston, TX
  • Crew:CFL

Posted 31 July 2008 - 02:19 PM

I'm a HUGE fan of flat black biggrin.gif , absolutely love them! and that pic with the s70 and 850 looks sick cool.gif
brinquedo 00R-M 309hp/385tq / '97-855R 26k miles on Volvo rebuild, Weitec kit / daily... 98 v70 t5...E36 m3
Posted Image

#17 ShadowVolvo01

    Level 1 Member

  • Members
  • Pip
  • 113 posts
  • Gender:Male
  • Crew:___

Posted 31 July 2008 - 03:08 PM

QUOTE (volvonez @ Jul 31 2008, 12:50 PM) <{POST_SNAPBACK}>
Here you go



There is a topic about my car in the show room here is the link:
http://volvospeed.com/vs_forum/index.php?showtopic=100811

Buy prep them i mean Clean, sand or scuff the old paint so the new paint will stick.

I switch to 85 degree reducer, and it will dry (in the air) BEFORE it hits the wheel if im not careful. Hits the wheel like sand....sucks

so yes i do know how fast it dries....but clear coat cures fast in the sun, but i also have CURE lamps in my truck for winter


Take a picture of your wheels in 6 months.... then we will see if you preped them right.

I make flat black with flatening agent in clear coat....... Rob Dyrdeks Suburban in Rob abd Big.....is flat like that.

good job though.... looks good




Not really ... i just painted over the original paint ... i spent like 3 hours ... lol i didn't even wait the paint dry ... flat black spray ... dries REALLLY fast ! you wouldn't believe how fast ...



#18 JC 855 GLT-R

    Level 5 Member

  • Lifetime Supporter
  • 5,404 posts
  • Gender:Male
  • Interests:volvos obviously, benzs too, snowboarding, modifying things and tinkering with things...
  • Location:Mays Landing, NJ or Pottstown, PA
  • Crew:NEC

Posted 31 July 2008 - 03:14 PM

to paint the 4 wheels how many cans of paint did you use? how many layers? im asking because im gonna paint that set of antilas that i have.

Posted Image
1993 Mercedes-Benz 190e 2.3 91k still broken
1996 Volvo 855 GLT-R 320+k and going ( Project GLT-R)
1998 Subaru Outback SUS -Daily Driver
Volvo for LIFE......


Parts for sale


#19 '98BRICK

    Level 1 Member

  • Lifetime Supporter
  • 159 posts
  • Interests:Women, Volvos, Yachts, Jets, Soccer, etc.
  • Location:St. Louis, MO
  • Crew:MWC

Posted 31 July 2008 - 05:25 PM

Nice...need some daytime pics
Alex - 1998 V70 AWD - 109K - My Garage - NC Cr3w
Anyone interested in a 98-00 X70 AWD 25mm rear sway bar kit from iPd?
PM me...

#20 volvonez

    Level 1 Member

  • Members
  • Pip
  • 93 posts
  • Location:Brazil

Posted 31 July 2008 - 06:32 PM

QUOTE (AZNJippiJAk @ Jul 31 2008, 12:14 PM) <{POST_SNAPBACK}>
to paint the 4 wheels how many cans of paint did you use? how many layers? im asking because im gonna paint that set of antilas that i have.


Depends how big the cans are ... i used like 3 cans ... but could have used 2 if i didn't mess up one of the wheels ... good luck ... post picture when you finish

QUOTE ('98BRICK @ Jul 31 2008, 02:25 PM) <{POST_SNAPBACK}>
Nice...need some daytime pics


I'll Post more daytime pics as soon as possible i promisse !





1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users



IPD
Copyright 2012 Volvospeed