I just put in my IPD springs, Bilstein rear and Koni front shocks and I'm very happy over all, however I noticed that my driver side rear wheel gap is about an inch or so bigger than the passenger rear (fronts are fine). I know this sounds stupid, but its going to drive me crazy until I fix it. Any ideas on what I could have done wrong?
5 replies to this topic
#1
Hagan
-
- Members
-
- 417 posts
Level 1 Member
Posted 01 November 2004 - 11:44 PM
'96 855 Turbo Red
IPD sway bars, IPD springs, Koni front, Bilstein rear, K&N panel, VDO boost guage, OMP strut brace, Dawes dual stage MBC, QBM sway bar links
IPD sway bars, IPD springs, Koni front, Bilstein rear, K&N panel, VDO boost guage, OMP strut brace, Dawes dual stage MBC, QBM sway bar links
#2
JDELUNA
-
- Members
-
- 795 posts
Level 2 Member
Posted 01 November 2004 - 11:46 PM
Might need some time for the suspension to settle.
1998 S70 T5 5-Speed
Upsolute ECU @16 Pounds Boost
243Whp / 285 Wtq
Upsolute ECU @16 Pounds Boost
243Whp / 285 Wtq
#3
theunderlord
-
- Members
-
- 14,738 posts
So old school, you don't even know...
Posted 01 November 2004 - 11:46 PM
QUOTE(haga3641 @ Nov 1 2004, 04:44 PM)
I just put in my IPD springs, Bilstein rear and Koni front shocks and I'm very happy over all, however I noticed that my driver side rear wheel gap is about an inch or so bigger than the passenger rear (fronts are fine). I know this sounds stupid, but its going to drive me crazy until I fix it. Any ideas on what I could have done wrong?
give it time to settle..... should get better... my front is about 3/4" higher than my rears with the setup I have...
07.5. 3500HD SRW. LMM. LT. CCLB. 4x4. Pioneer DVD. JL Audio. Rockford Fosgate. Subthump. Katzskin Interior. Fab Fours Front Bumper. Reese Class V. 6K HID. 20% Tint. Bushwacker. Smoked Recon LED Taillights & Third Brake Light. US Speedo Gauge Overlay. Colormatched Vent Visors/AVS Bug Deflector/Door Handles. Black NFab Bars. LineX. 6" Tuff Country Lift. 325/60-20 Nitto Terra Grapplers. KMC XD Black Rockstars. 20"x10" -24 offset 4.56" BS. PCV Re-Route. Banks Boost Tube. AFE PG7. Edge CTS Race. 4" Silverline Downpipe Back Exhaust. 5" MBRP Tip.
To Install/On Order: Banks Intercooler, AirDogII DF-165, Fab Fours Rear Bumper, Diamond Eye Downpipe.
To Install/On Order: Banks Intercooler, AirDogII DF-165, Fab Fours Rear Bumper, Diamond Eye Downpipe.
#4
Hagan
-
- Members
-
- 417 posts
Level 1 Member
Posted 02 November 2004 - 04:12 AM
QUOTE('98S70R @ Nov 1 2004, 06:46 PM)
QUOTE(haga3641 @ Nov 1 2004, 04:44 PM)
I just put in my IPD springs, Bilstein rear and Koni front shocks and I'm very happy over all, however I noticed that my driver side rear wheel gap is about an inch or so bigger than the passenger rear (fronts are fine). I know this sounds stupid, but its going to drive me crazy until I fix it. Any ideas on what I could have done wrong?
give it time to settle..... should get better... my front is about 3/4" higher than my rears with the setup I have...
yeah its been less than a week so you guys are probly right.
'96 855 Turbo Red
IPD sway bars, IPD springs, Koni front, Bilstein rear, K&N panel, VDO boost guage, OMP strut brace, Dawes dual stage MBC, QBM sway bar links
IPD sway bars, IPD springs, Koni front, Bilstein rear, K&N panel, VDO boost guage, OMP strut brace, Dawes dual stage MBC, QBM sway bar links
#5
Adam Franke
-
- Lifetime Supporter
-
- 2,299 posts
Supporting Member 4 Lyfe
Posted 02 November 2004 - 04:41 AM
My front is 1/2" lower than my rear, and all 4 wheels have a nice bit of tuck. Once the jerk end settled, it got better, but front is still lower. The pictures I have don't show it that well, seeing as I lowered the front another 1/4" this weekend. I love it.
Edited by scope, 02 November 2004 - 04:42 AM.
#6
prasamin
-
- Supporting Member
-
- 16,242 posts
Bipedal Magnaflux
Posted 02 November 2004 - 06:26 AM
welcome to the "i just lowered it and I don't like it so much" club! give it some time i guess...that's what i'm doing, until i get pissed and cut the springs!
