21 replies to this topic

[rbodor3]

Pictures to follow tomorrow, but I want to raise some $$ for my tune and wideband, and also get rid of all this BS sitting in my basement now:

ALL PRICES + SHIPPING UNLESS NOTED

16t (<80k miles) no/minimal play, worked great on my car, no actuator $200 shipped



stock bcs $15 shipped CONUS no picture

iequus narrowband O2 (the one IPD sells) as-is 52mm, barely used $25 shipped CONUS


stock, front calipers (painted red) <60k miles, in good shape (one was rebuilt due to leak), no pads, comes with the brake lines and mounting hardware $150 pictures available upon request!

brand new front trim pieces (gray) for front bumper, never mounted never used, bought about 9 months ago, almost never exposed to UV light $40 + shipping no picture right now

All of the items are negotiable, so send me an offer. I'll be taking pictures tomorrow to post. You pay shipping. I accept paypal and good 'ole cash. ALL ITEMS SOLD AS-IS, if you don't like them though I'm willing to refund if you pay shipping back and notify me with 1 week of receiving the items. Trades considered... looking for wmi and fmic

[rbodor3]

updated with pictures and lowered some prices. Make me some reasonable offers!

ps - mods I tried to make the pictures thumbnails but it didn't work...?

[JVC]

PM Sent.

[rbodor3]

spacers sold, pending paypal.

[tsuehpsyde]

PM Sent.

[Bah]

Konis so tempting for my 93...10k old struts..or 220k old struts...gahhh

[rbodor3]

strut housings are pending sale
But the actual Koni inserts are still available, updated pricing $100 for the inserts pending the strut housing sale.

[rbodor3]

updated pricing see above
16t = $300
angle housing flange for down pipe = $25 + $10 if you want me to clean/grind it shipped CONUS
Viva CBV diaphragm + ipd red spring = $30shipped CONUS

[mrbrightside2009]

will the bcs work in a 98 s70?

[rbodor3]

not sure, I know you can use an mbc in pre-99 but can't in 99+, not familiar with it

[Naughty33W]

are those rotors oem diameter for our cars ?

[rbodor3]

yes sir, OEM diameter. They're in good condition I drove very few miles on them, and the pads as you can see are almost new. I have no use for them right now.

I can take some better pictures on Sunday

[Naughty33W]

cool - they'd look bada** behind my new 18" OZ's --- i'll let ya know as soon as i can - i also have to buy a 16T and a R mani

[7 VII 7]

for that 16t... what would I need to make it work in my 850R?

I have an OEM WG Actuator and angled housing

[Naughty33W]

7 VII 7, on 08 November 2009 - 03:05 AM, said:

for that 16t... what would I need to make it work in my 850R?

I have an OEM WG Actuator and angled housing

i think you can just mount ur wga to the 16T

[Naughty33W]

hey , how hard was it to swap the rotors on ur S60 ?

i've always had fords and imo they were easy as pie to do

[rbodor3]

7 VII 7, on 08 November 2009 - 03:05 AM, said:

for that 16t... what would I need to make it work in my 850R?

I have an OEM WG Actuator and angled housing

you would need to remove your existing WG actuator and mount it on this one, IIRC the 850R had the 16T or was it 15? YOu can keep your angled housing and it will fit right in.

Naughty33W, on 08 November 2009 - 05:37 PM, said:

hey , how hard was it to swap the rotors on ur S60 ?

i've always had fords and imo they were easy as pie to do

Pretty simple. Remove wheels, remove the little 10mm stud holding the rotors on, remove the calipers (2 7mm hexs) and knock the old ones off with a hammer. It's the same as this link except obviously the fronts.

[rbodor3]

struts are now just the koni inserts, real cheap if anybody's interested and negotiable due to chipped paint on the inserts (which completely does not matter because you don't see them anyway )

Rotors & pads are pending sale

Prices on items lowered

[rbodor3]

Updated to reflect sold items

Prices lowered on remaining items. Nobody wants a 16t???

[rbodor3]

$250+shipping (I can ship pretty cheap ask my buyers) for the 16t
no actuator or exhaust housing, fresh cbv