To anyone who has an M66 in their 850 (I'm guessing you're on the other side of the pond): What passenger CV shaft are you using? The one the seller told me to get ('00+ V70 AWD) is not the right one. It looks like I need to order a '99 V70AWD, and mate that to the 850 one. Thanks.
0
4 replies to this topic
#1
'12brotruckmofo
-
- Lifetime Supporter
-
- 3,478 posts
Level 4 Member
- Gender:Male
- Location:New Orleans, LA
- Crew:___
Posted 03 November 2009 - 10:32 PM
#2
Chilled Man
-
- Gold Member
-
- 30,087 posts
MILFSPEED
- Gender:Not Telling
- Interests:Demo Sawing your Volvos Up
- Location:( . Y . )
- Crew:NEC
Posted 03 November 2009 - 10:34 PM
IIRC your should be using a 98 XC shafts
Ask lookforjoe he would know
2012 Fusion 2004 V70XC 2001 V70XC-M66 1998 C70T5 M56
- 1998 C70 T5M for sale $3000 project car , 04R motor M66 and many other mods needs to be finished
- 1998 C70 T5M for sale $3000 project car , 04R motor M66 and many other mods needs to be finished
#3
lookforjoe
-
- Lifetime Supporter
-
- 8,316 posts
Level 5 Member
- Gender:Male
- Interests:Making Stuff
- Location:New York
- Crew:NEC
Posted 03 November 2009 - 10:47 PM
...That would be correct, Justin.
You need a '98 XC/AWD rights side shaft - can't imagine WTF they were thinking on a later shaft - it has the wrong hub attach design. '98 shaft will bolt right up, the suspension/steering/hubs are the same as '98 (design wise, anyway)
If you're running FWD - you need the spline coupler too, or you'll have a very large puddle of trans fluid
You need a '98 XC/AWD rights side shaft - can't imagine WTF they were thinking on a later shaft - it has the wrong hub attach design. '98 shaft will bolt right up, the suspension/steering/hubs are the same as '98 (design wise, anyway)
If you're running FWD - you need the spline coupler too, or you'll have a very large puddle of trans fluid
1998 V70 XR M66 PTE6262 BB Built '04 2.3l Block '03 Ported Head EnemY21Cams TurboTuner 710cc Inj, 3" DP back Dual Magnaflow 14834's May 2011 355WHP(@6400rpm) 347WTq(@4400rpm)@22psi Now with LGSpeed Header & Custom Intake Manifold! BIG 31x12x3"FMIC
#4
'12brotruckmofo
-
- Lifetime Supporter
-
- 3,478 posts
Level 4 Member
- Gender:Male
- Location:New Orleans, LA
- Crew:___
Posted 05 November 2009 - 01:16 AM
Spline coupler was already installed. 
CV shaft is on its way. Thanks!
CV shaft is on its way. Thanks!
#5
Chilled Man
-
- Gold Member
-
- 30,087 posts
MILFSPEED
- Gender:Not Telling
- Interests:Demo Sawing your Volvos Up
- Location:( . Y . )
- Crew:NEC
Posted 05 November 2009 - 01:38 AM
LEFT is for the tranny input works with
99 older 4 speed autos
M56
RIGHT is for 5 speed autos
now that input shaft is the same minus the shaft diamter for the M66 also.
since I would hope we all know the difference betwee awd and FWD shafts
Left AWD Right FWD
granted the FWD is a custom built one for my 01XC but ignore that part
2012 Fusion 2004 V70XC 2001 V70XC-M66 1998 C70T5 M56
- 1998 C70 T5M for sale $3000 project car , 04R motor M66 and many other mods needs to be finished
- 1998 C70 T5M for sale $3000 project car , 04R motor M66 and many other mods needs to be finished
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
