435 replies to this topic

[mdlimy]

I need to have a thread for all my shit, eventually i will have it all organized with everything i have done like Hussein but right now i just want a thread to post updates and show you guys what i have going on.

so anyways just gonna start throwing some stuff up.

95 855 turbo.
m56h swap
full v70r interior including dash and door panels (from inside the car you wouldnt know its an 850)
Running on Megasquirt MS2extra v3.03r controlling everything including coil on plug.

ill just start posting pictures.

uploading them now, anywaysyyyy....

when i bought it, just painting up the trim



put some black atlantis wheels on it


and lowered it a bit






bought this for 150 bucks =]


megasquirt, lc-1 and xd16, boost, egt, etc....aka standalone shit.




grabbed a 20g from justin


megasquirt time



byebye =]


know one else was going big at the time so i started cutting




picked up a front end totaled 00R for 1500 bucks, stripped it for the whole interior and motor, sold off the tranny, turbo, and misc stuff and made back about 900 bucks



the build block


There was a BIGGG gap where i didnt take hardly any pics, so anyways, megasquirt is running good on the distributor then...

coilpacks!




with a bit of a fight i got it running and cleaned up the wiring


Pulled the wiring harnesses out, now that everything is working it is time to ditch all the temperary butt connectors and solder all the wires and clean it up.


reinstalled the cleaned up harnesses (sorry no pics)
did a wire tuck at the same time.





oh and i bought that est intake to clean things up.

covers back on, wiring finished, how the bay looks currently (3-7-10)




All the interior is in, everything is a direct swap as you may know EXCEPT the door panels, you have to use the v70 doors (which i did) and the dash needs a little bit of trimming around the windsheild area, other than that it bolts right up, then you have to deal with the nightmare rewiring all the doors, climate control etc...

just cleaned the carpets and put them back in



all the seats in...




gotta have a harness ;)3pt Schroth. harness bar pretty soon here!



added the dual exhaust bumper, slight modification required, nothing major tho.



picked up a set of aluminum control arms from the junk yard for 20 bucks, gonna have a buddy do some tig welding and strengthen them up a bit before they go on, pics of course when that happens



KnockSenseMS, just a knockbox setup, has an led that flashes when knock is detected, megasquirt will be setup to to pull timing accordingly


got a 3" angled obx dp for free from a buddy, bought a header reducer, and the correct flange for my 20g, used the header reducer to taper the 3" onto the flange.




20g is getting a new neck welded on currently.
Girlfriend is bitching, ill work on this more later.

[Johann]

Nice and clean engine bay !

[Mesoam]

well you certainly enjoy working on your car

looks good, hope you're putting in a harness bar...

[Canadianplat855]

Looks awesome! Nice work.

[matt b]

Put that harness bar soon.

Thought about brakes yet ? All those nice mods, make sure you can stop when you have to!

I love the engine bay clean up, it's great t see someone finally tackle that.

[TRACStar]

I've never been a huge fan of those wheels but they look good with that color combo

[mdlimy]

I've never been a huge fan of those wheels but they look good with that color combo

thanks guys, harness bar well definetly be in before i start driving it/wearing the harness, dont feel like breaking my neck

brakes are on the list soon just need to save some money, i have 2 855 turbos that i am fixing and selling at the moment so that should fund the rest of the car.

[98 Estey T5-M]

I love the interior work that you did!

Car looks great...

[mojojo]

I'm usually iffy about wagons, but your's looks really nice. Obvious, a lot of time has gone in to the makings.

[Fudge-Brownie]

Very nice!!!

[Fudge-Brownie]

Very nice!!!

Just noticed how nice the 5th pic is. Thats exactly how i want mine to sit when my 18" TDR 1.2's come in. Although i think by looking at the other pics, that was just good shot on the right grading??

[mdlimy]

Just noticed how nice the 5th pic is. Thats exactly how i want mine to sit when my 18" TDR 1.2's come in. Although i think by looking at the other pics, that was just good shot on the right grading??

that is how it sits, it is tucking the tire in the front and rear, im still going lower once the new wheels are on, but i am almost happy with how it sits currently, would be happier if it was a tad lower in the front, but its going to come down alot on the new wheels.

[mdlimy]

wow so fucking happy right now, stupid fucking boss sells me wheels, then tells the customer buying the mercedes that he has the set of stock wheels and that he can have them with the car...no actually you sold them to me ass hole, now i might not even get them. i want kill someone right now, fucking bitch ugh.

[NGB]

wow so poking happy right now, stupid poking boss sells me wheels, then tells the customer buying the mercedes that he has the set of stock wheels and that he can have them with the car...no actually you sold them to me ALL GLORY TO THE HYPNOTOAD hole, now i might not even get them. i want kill someone right now, poking oh yeah! ugh.

If you paid for the wheels, he's got no leg to stand on. Where do you work?

[Tom.]

i dont get how your 00R parts car has a tan interior and how you ended up with a charcoal one do tell. lol

but the cars looking good man!

[mdlimy]

If you paid for the wheels, he's got no leg to stand on. Where do you work?

its one of those shitty situations, my instinct wants to argue with my boss and tell him to fuck off and keep the wheels...but that would get my ass canned and thats the last thing i need right now. customer hasnt bought the car yet, my boy is doing the paper work for it tommorow when the customer comes in so he will try to convince him out of the wheels or atleast get him to sell me them for a decent price. just really aggravated me, dont like my boss's personality to begin with just watch him read this post

i dont get how your 00R parts car has a tan interior and how you ended up with a charcoal one do tell. lol

but the cars looking good man!

haha that pic was taking after i pulled the interior and tossed my tan interior in that car, no one wants a beat up tan 855 interior so i just scrapped it with the car.


took a little drive down to ipd to visit lucky earlier today, figured i would do a bit of street tuning, see if i could get the boost tuned in...well that didnt work to well, car died in the middle of the road relays have a bad connection in the harness, so now i need to drop 170 bucks on a relay box and relay harness and redo some wiring theres never time to do it right the first time but always time to redo it later fml.

[mdlimy]

been soooo busy lately havent worked on it at all till tonight, started installing the relay board since i didnt like the ghetto hardwired in relays.

o and added another sticker


then tomorrow gotta finish this...

]


OHHHHH SUPER STOKED! i bought those MB wheels from the customer that my boss sold them too =] payed about the same.

Bolted one up tonight and it bolted down pretty fine with the stock lugbolts, tightened all the way down, the wheel is hubcentric so i migth try getting some centering rings and bolting them down tight and seeing how it goes....
i know..sketchy

[Hastings]

Dude looking good, keep it up, thread bookmarked. <3 green 855's.

[cr854r]

lookin good mane

[sacrifice]

love build threads with a lot of pics. car looks awesome keep up the good work!