Jump to content


FCP Euro

S80T6 Vs 2007 Monte Carlo Ss


  • Please log in to reply
9 replies to this topic

#1 S8ET6

S8ET6

    Level 2 Member

  • Lifetime Supporter
  • 922 posts
  • Gender:Male
  • Location:Chicago
  • Crew:MWC

Posted 30 June 2010 - 06:29 PM

So ... my best friend from childhood owns a 2003 Corvette. It’s nothing special, just the base model with a stock LS1.

For over a year I’ve been trying to get him to do a 40mph+ pull with me (not necessarily because I thought that I could out pull him, mostly just to see how the T6 would fair with the front mount and WI installed). An avid boxing fan, he felt that before I could ever be a contender for the corvette’s belt, I must successfully pass up through the ranks by first defeating his DD – a 2007 Monte Carlo SS with a 5.3 liter V8 (303hp & 325tq and capable of running low 14s to high 13s stock). On paper it was a great matchup (since both cars are similar in weight, both are FWD automatics with basically the same transmission, and in our opinion both made similar HP), but I was never that interested because I had always felt that his Monte Carlo just didn't have enough for the T6.

So anyway, the phone rings last night around midnight and it’s my buddy, on his cellphone, in my driveway, calling me out – literally.

I was hesitant since I need to replace a dying ETM and a bad O2 sensor (the last thing that I needed was to loose to that car and be forced to listen to him talk shit forever), but he knew the exact buttons to press in order to get me out for a few pulls. As we headed to the private airstrip on his family’s farm where they land their crop duster, I noted that the temps outside was in the low 60s (mmm , turbo weather).

The first pull was from 40mph. No honks or anything – I just told him to go when he was ready.

I was settling in @ 40mph with my GT still in 3rd when he nailed it. His car was so quite, that I didn’t notice that he had downshifted into 2nd so he took about a car and a half lead, but my downshift to 2nd stopped that and by the end of 2nd gear I had pulled ½ of a car in front. I continued to out pull him while in 3rd, and by 90mph I shut it down maybe 2 or 3 cars in front of him. We tried it again from 40mph (this time with both of us in 2nd gear) and I immediately walked away from him so fast it wasn’t even a contest.

He said that 40mph starts weren’t the best for him because he wasn’t starting in his motor’s optimal power band. He felt if we were to start either in the 30mph range or the 60mph range it would be different results. Seemed resonable. So, being the good friend that I am, I gave him a chance to redeem himself at both a 30mph roll (in 1st gear) and at a 60mph roll (high in second gear). From 30mph the results were no different, but he was right - it was more competitive leaving @ 60mph. I didn’t pass him until somewhere around 67mph.:lol:

Afterwards, I felt so confident that I suggested we go from a standstill. Since the ¼ mile wasn’t marked, we agreed that the race was to 100mph (we figured that the cars trapped 100mph at best, so by the time we reached 100mph we would have raced for approximately a ¼ mile) Again, he could leave when he was ready. As I heard the squeal of his tires, I tried to leave – only to bog at the line followed by massive wheel spin (who bogs with an automatic?!? - Damned ETM!:excl: ). Unfortunately, he got enough of a lead that I couldn’t get in front of him before 100mph.

Now he’s ready to pull out the corvette and redeem himself. :ph34r:


Posted Image

My Garage

"One is greater than Two"

Ive done my research and my math shows that this will work! - Binsky3333




#2 Snabb T5M

Snabb T5M

    Level 1 Member

  • Gold Member
  • 10,331 posts
  • Gender:Male
  • Interests:IU BASKETBALL; 1969 Roadrunners; Drag racing; rugby; traveling the world
  • Location:NW Indiana
  • Crew:MWC

Posted 01 July 2010 - 01:34 AM

DAMNIT!!! Darnell, where was my phone call to get in on this race!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Shocker!!!! :o :o :o :o
Lee 1998 S70 T5M; 113K+ miles; IPD Stage III ECU; 18T turbo @18.5psi; Precision FMIC; R manifold; EST 3" DP; balanced crank with LGSpeed rods; 3 angle valve job; SPEC III clutch; ALL of Sconeman's T5M parts; KW2 coilovers; TurboSmart Eboost2 EBC ---13.605 @ 105.39 mph ---

Posted Image


#3 S8ET6

S8ET6

    Level 2 Member

  • Lifetime Supporter
  • 922 posts
  • Gender:Male
  • Location:Chicago
  • Crew:MWC

Posted 01 July 2010 - 02:40 PM

View Postleroystew, on 01 July 2010 - 01:34 AM, said:

DAMNIT!!! Darnell, where was my phone call to get in on this race!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Shocker!!!! :o :o :o :o

LOL.

Would've been a waste of your time...

plus, I've met your wife, and she might've been pissed at me for taking you out of the house after midnight :ph34r:

Posted Image

My Garage

"One is greater than Two"

Ive done my research and my math shows that this will work! - Binsky3333


#4 Wagon Mafia

Wagon Mafia

    Saab Doucher

  • Supporting Member
  • 6,726 posts
  • Gender:Male
  • Location:West Bloomfield, MI
  • Crew:NEC

Posted 01 July 2010 - 06:23 PM

Quote

I was settling in @ 40mph with my GT still in 3rd when he nailed it.
GT? Mustang GT?
1997 855 T5 sold
2000 9-5 Aero 5spd
Posted Image

#5 magicaljake

magicaljake

    Level 4 Member

  • Supporting Member
  • 4,455 posts
  • Gender:Male
  • Interests:woman, booze, karaoke, volvos, fresh nikes,
  • Location:Colchester VT
  • Crew:NEC

Posted 01 July 2010 - 06:58 PM

View PostWagon Mafia, on 01 July 2010 - 06:23 PM, said:

GT? Mustang GT?


i think me means "gear thingy"

Posted Image
2006 S60R 6speed.. red and orange
long live vanessa 2.0!


#6 ozzimark

ozzimark

    Level 4 Member

  • Lifetime Supporter
  • 4,352 posts
  • Gender:Male
  • Location:Rochester, NY
  • Crew:NEC

Posted 01 July 2010 - 07:37 PM

Geartronic ;)

#7 Snabb T5M

Snabb T5M

    Level 1 Member

  • Gold Member
  • 10,331 posts
  • Gender:Male
  • Interests:IU BASKETBALL; 1969 Roadrunners; Drag racing; rugby; traveling the world
  • Location:NW Indiana
  • Crew:MWC

Posted 03 July 2010 - 03:47 AM

Is that a shot at my wife? :o

You should have your friend bring that "hot" SS to the dragstrip with us next time.



View PostS8ET6, on 01 July 2010 - 02:40 PM, said:

LOL.

Would've been a waste of your time...

plus, I've met your wife, and she might've been pissed at me for taking you out of the house after midnight :ph34r:

Lee 1998 S70 T5M; 113K+ miles; IPD Stage III ECU; 18T turbo @18.5psi; Precision FMIC; R manifold; EST 3" DP; balanced crank with LGSpeed rods; 3 angle valve job; SPEC III clutch; ALL of Sconeman's T5M parts; KW2 coilovers; TurboSmart Eboost2 EBC ---13.605 @ 105.39 mph ---

Posted Image


#8 S8ET6

S8ET6

    Level 2 Member

  • Lifetime Supporter
  • 922 posts
  • Gender:Male
  • Location:Chicago
  • Crew:MWC

Posted 03 July 2010 - 04:55 PM

View Postleroystew, on 03 July 2010 - 03:47 AM, said:

Is that a shot at my wife? :o

Seriously?
Of course not. Sorry if it came across that way.

Posted Image

My Garage

"One is greater than Two"

Ive done my research and my math shows that this will work! - Binsky3333


#9 Snabb T5M

Snabb T5M

    Level 1 Member

  • Gold Member
  • 10,331 posts
  • Gender:Male
  • Interests:IU BASKETBALL; 1969 Roadrunners; Drag racing; rugby; traveling the world
  • Location:NW Indiana
  • Crew:MWC

Posted 03 July 2010 - 05:43 PM

I didn't think so, and kept rereading it to make sure. Was more of a joke response with no seriousness. ;)


View PostS8ET6, on 03 July 2010 - 04:55 PM, said:

Seriously?
Of course not. Sorry if it came across that way.

Lee 1998 S70 T5M; 113K+ miles; IPD Stage III ECU; 18T turbo @18.5psi; Precision FMIC; R manifold; EST 3" DP; balanced crank with LGSpeed rods; 3 angle valve job; SPEC III clutch; ALL of Sconeman's T5M parts; KW2 coilovers; TurboSmart Eboost2 EBC ---13.605 @ 105.39 mph ---

Posted Image


#10 550

550

    someone please talk to me

  • Vendor
  • 10,266 posts
  • Gender:Male
  • Interests:My two cars
  • Location:Chicago, Illinoia
  • Crew:___

Posted 04 July 2010 - 12:48 AM

Honesty is the best policy I always say hahaha :P
V.C.O.A. Midwest Chapter President.
Check out jjfab.net for your k24 flange needs!
1998 S70 now running a 2002 engine. Woo




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users

IPD Volvo Parts


Copyright 2012 Volvospeed