I think he is looking for the shop he now owns. Feel free to advertise Mark.

Professionals
#21
Posted 30 September 2005 - 11:05 PM
I think he is looking for the shop he now owns. Feel free to advertise Mark.
#22
Posted 02 October 2005 - 10:57 PM
Edited by J-Rock, 08 October 2005 - 03:29 AM.
#23
Posted 04 October 2005 - 01:38 AM
I've been a backyard mechanic since around 1990 and used to make my racing money by working on other people s cars. I've probably installed around 50 sets of springs, done dozens of cluthes and cylinder heads, etc. I still occasionally do weekend work in the garage, but much less than in the past as I now have a family that eats up my extra time.
72 1800e - Real pretty, real slow. - rebuilding engine and adding Eaton M45 just for kicks.
#24
Posted 05 October 2005 - 11:30 PM
Now I do suspension/brakes/alignments at DEVEK in Redwood City, CA (Porsche Specialist)
1998 Volvo S70 T5M - Stock for now.
1989 Porsche 944 S2 - For Sale
1988 Volvo 245 DL - For Sale
Past Volvos:
1982 242ti 4-speed+OD
1982 245ti 4-speed+OD
#25 Guest_Guest_Jonathan_*_*
Posted 06 October 2005 - 08:58 PM
#26
Posted 07 October 2005 - 09:59 PM
Puget Sound aera
30 years experience
ASE certified Master tech
WA state certified emission repair tech
Factory rep Vetronix/Bosch Corp
Edited by azinwa, 07 October 2005 - 10:00 PM.
#27
Posted 01 November 2005 - 01:57 AM
incase you haven't found out yet, a quick google resulted in his site:
http://ocautosites.com/SwedishAuto/OurShop.htm
Swedish Independant Auto Service
16650 Harbor Blvd. # B-11 Fountain Valley, Ca. 92708
(714) 839-7911
NEW TOY: 2004 S60 R GT 34k miles.
#28
Posted 20 November 2005 - 11:58 PM
BSR catback
Speedtuning Chip- 15psi
Reverse intercooler piping
K&N drop in
NGK Iridium plugs
Dakota Digital Boost/vac gauge
...And now my car's wicked fast!!
#29
Posted 23 November 2005 - 04:19 PM
http://ocautosites.com/SwedishAuto/OurShop.htm
Swedish Independant Auto Service
16650 Harbor Blvd. # B-11 Fountain Valley, Ca. 92708
(714) 839-7911
Bumpinvolvo, thank you very much for the bump. That is my shop, sometimes I get so darned busy it is tough to keep track of all of the posts. Thanks again, if I can be of assistance give me a call.
Mark
#30
Posted 09 December 2005 - 11:47 AM
#31
Posted 20 April 2006 - 02:16 AM
17yrs for Lehman Volvo York Pa.
Volvo Expert Tech
ASE Advanced
#32
Posted 20 April 2006 - 04:29 AM
volvo SAFE student- almost graduated.
worked at a volvo independent between schools
2 years field experience
4 ase certs
alldata certified (does this actually count for something?! i doubt it)
#33
Posted 20 April 2006 - 12:50 PM
Airframe & Powerplant mech, Boeing 15 years. My specialty is Pratt & Whitney/ Rolls Royce and Heavy Jet airframes. Worked for Boeing, McDonnell Douglas, TWA, Goodrich Aero, San Antonio Areospace, L3 Comm and now Bombardier Aerospace.
Have owned a Volvo sense 86 and specialize in 140 and 240 series and working up to my new 850. I was a US Army light wheel vehicle mech when in the military and worked for several shops as a mechanic. I have been certified ASE with brakes and alignment. I went back to aircraft before I finished the rest of my testing.
I can turn wrenches with the best of y'all on cars.
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users



This topic is locked












