'99 S70 2.3 T5 Manual Or '03 S80 2.8 T6 Auto For Spirited Driving?
#1
Posted 27 December 2011 - 11:54 PM
I previously had a nicely tuned 278 hp '98 S70 2.0 T5 manual (225hp stock) and I was pretty happy with it until I decided to upgrade..
I sold it and now have the option of buying a '99 S70 2.3 T5 manual (239 hp stock..) with newly rebuilt engine and turbo due to a previous oil pump failure , or a '03 S80 T6 with stock engine, transmission and turbos. Both cars are at around 110.000 miles and they sell for a similar price (the S80 is a bit more but that's not important.)
The cars will be driven in Turkey where there are no enforced speed limits so 150+ mph is possible on most freeways most of the time and I usually do drive at those speeds (at least twice a week.)
I also wish to do performance upgrades to these cars; namely brake upgrades, performance exhaust, chip tuning and if I get the S70; a turbo upgrade. If I get the s80 I'll add a transmission cooler and a fluid flush prior to doing anything else..
My question is; which one of these cars will be more reliable after I mildly modify them, and will the performance differences be huge especially in terms of in-gear acceleration and top speed (0-62 is not that important although my previous S70 was capable of doing this in 6.2-6.4 secs according to OBD monitoring.)? Please feel free to advise and comment freely. Many thanks.
#2
Posted 28 December 2011 - 12:21 AM
Ian Carr - 99' Volvo S70 T5M - 86' Porsche 944 Turbo - 07' Mazda 3

True CAI, Neptunes, XC bumper, iPd25mm rear sway, short shifter, front mount, ssqv, sweet license plate mounted in the engine bay, D2's
#3
Posted 28 December 2011 - 01:19 AM
ipd sparkplug wires, HD TCV, CBV, sways and springs, K&N filter
1999 Jeep Grand Cherokee Laredo, unstopable
#4
Posted 28 December 2011 - 03:57 AM

1998 V70 XR M66 PTE6262 BB Built '04 2.3l Block '03 Ported Head EnemY21Cams TurboTuner 710cc Inj, 3" DP back Dual Magnaflow 14834's May 2011 355WHP(@6400rpm) 347WTq(@4400rpm)@22psi Now with LGSpeed Header & Custom Intake Manifold! BIG 31x12x3"FMIC
#5
Posted 28 December 2011 - 05:28 AM
#6
Posted 28 December 2011 - 06:49 PM
lookforjoe, on 28 December 2011 - 03:57 AM, said:
Damn you beat me to the punch haha

AdirondackVolvo: "Well the Starion was supposed to be the Stalion, so shouldnt the Honda Pilot be the Honda Pirate?"
#7
Posted 28 December 2011 - 07:40 PM
My pride and Joy -------------------------------------Volvo Rat------------------------------------ 98' 874 T5

No power Steering, Bride Bucket Seats, M56H swapped, FMIC, OBX exhaust,
All digital gauges, Koni Yellows, Ipd Sport springs, Rebuilt head, N/A Cams
#8
Posted 01 January 2012 - 11:28 PM
#9
Posted 02 January 2012 - 12:07 AM

AdirondackVolvo: "Well the Starion was supposed to be the Stalion, so shouldnt the Honda Pilot be the Honda Pirate?"
#10
Posted 02 January 2012 - 12:27 AM
#11
Posted 02 January 2012 - 02:02 AM
select shift*
#12
Posted 02 January 2012 - 03:22 AM

AdirondackVolvo: "Well the Starion was supposed to be the Stalion, so shouldnt the Honda Pilot be the Honda Pirate?"
#13
Posted 04 January 2012 - 11:02 AM
#14
Posted 04 January 2012 - 04:44 PM
eggster34, on 04 January 2012 - 11:02 AM, said:
1999 S70's and up use the same engine management systems as the 2001 s60's I believe. For the most part, volvo started having more problems with cars once ford bought them
Ps you are posting on a board that primarily focuses on pre-ford cars. It's kinda like having an apple judge an orange.
My pride and Joy -------------------------------------Volvo Rat------------------------------------ 98' 874 T5

No power Steering, Bride Bucket Seats, M56H swapped, FMIC, OBX exhaust,
All digital gauges, Koni Yellows, Ipd Sport springs, Rebuilt head, N/A Cams
#15
Posted 04 January 2012 - 04:47 PM
eggster34, on 04 January 2012 - 11:02 AM, said:
The S60 is fine if you acquire it with a manual transmission. The auto tranny not so much.
#16
Posted 04 January 2012 - 04:48 PM
#17
Posted 07 January 2012 - 08:35 AM
1- solve the tranny issue to prevent it from breaking on me, any suggestions besides a 3rd party transmission cooler?
2- do a stage0 tune before chip-tuning and adding a performance exhaust etc. , what is the list of parts I'll need to change?
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users


















