Jump to content


FCP Euro

Genuine Leather/alcantara Shift Boots For Volvo's!


  • Please log in to reply
84 replies to this topic

#1 RedlineGoods

RedlineGoods

    Level 1 Member

  • Vendor
  • 52 posts

Posted 25 January 2012 - 11:21 PM

Hello everyone,

We, RedlineGoods.com, are no stranger to the automotive industry. We have been providing our customers (now over 35 000) with QUALITY GENUINE ITALIAN LEATHER SHIFT BOOTS for 10+ years now. If you take pride in your ride - you will want to read this.

Has your shift boot seen better days?
Have you purchased a short shifter kit and the stock boot doesn't look good anymore or even hinders shifter travel?
Do you simply want to upgrade your stock vinyl pieces to finer leather?
Are you looking for the finishing touch to your custom interior?

Regardless of the reasons, RedlineGoods has a solution for you.

Starting with fine, buttery soft Italian leather, we will hand-craft new boots for your vehicle. The boots are made specifically for your model, so they fit your ride perfectly without any modification - unlike generic boots sold by others. See for yourself:
Posted Image

RedlineGoods has nothing to do with mass production. We're all about YOUR needs and YOUR car, which means a vast array of customization options.

These range from available materials (leather, carbon-fiber, faux-alcantara, genuine Alcantara, perforated leather), through many color options (30+ colors of material and threads) to various finishing types (quadruple thread, two-tone, stripes and piping) - and we're open to even more custom arrangements. You can find our complete color chart by clicking here: http://www.redlinego...m/clrchart.shtm.

You can also order a re-sized shift boot for your short shifter or custom transmission setup, get the boot with the mounting bracket (where available) and order extra padding for your armrest cover. Or if you need a small design modification, for example in order to get your aftermarket shift knob to sit flush against your shift boot - we're the ones you should send an email to!

Our products are hand made to your order, shipped from Europe and arrive at your doorstep within two weeks from placing an order.

Our products have been discussed on many automotive forums and we frequently receive great customer comments. Just run a search on RedlineGoods on this forum to find out more about us, our products and our customer feedback.

Since, as the proverb goes, a picture is worth a 1000 words, here are some of them for your enjoyment. Click the link above them to go directly to our page dedicated to YOUR CAR, where you can easily order them with PayPal or your credit card!

Posted Image

Posted Image

Posted Image

Posted Image

Posted Image

We have them available (at this time, but please check the site often as we plan on adding new models frequently!) for:

C30 07+ http://www.redlinego...07shiftboot.php

C40 06+ http://www.redlinego...06shiftboot.php

S40 04+ http://www.redlinego...04shiftboot.php

V50 06+ http://www.redlinego...06shiftboot.php

Just click the respective links to see prices and the ordering link!

The prices are:

$44 each single boot (shifter or ebrake)
$69 two boots (if an ebrake is available)
$49 armrest cover
$69 either boot and armrest cover
$109 two boots and armrest cover

One of the first questions is always about the available colors. I hope this pictures explains it perfectly well!
http://www.redlinego...<!--NoParse7-->

Please remember that if you cannot decide without seeing the colors in person you can ORDER SAMPLES from us. For a mere $10 you'll get ALL the samples (a small swatch of each color) and, more importantly, if you actually order a product going by those, you'll get $5 of that reimbursed to you.

Find below some photos of our STRIPED BOOTS. These can be ordered for any car and unless you specify otherwise, the stripes will be put wherever there are stitches on your stock boot, ie. a stripe is inserted between two adjacent panels, which are also re-sized to make sure the overall dimension is correct!

Stripes can be combined with stitching which can be CONTRASTING (these two are black perforated leather with light gray stripes and contrasting thread):
Posted Image
Posted Image

Same as above but solid, not perforated, black:
Posted Image

Thread can be also MATCHING so it won't be visible
Posted Image
Posted Image
Posted Image

Thread can be color-matched to the stripes or to the main panels' leather color. Here color matched to stripes, obviously :)
Posted Image

Or it can be a completely different color than either the main panels OR the stripes - below is black leather with white stripes and red thread:
Posted Image
Posted Image

PIPING is a cool, sporty and elegant way to finish off your shift boots. Piping can be done for any car, and it replaces the threads with a special, well, pipe made by wrapping a thin plastic tube with leather. It looks amazing:

Posted Image
Posted Image
Posted Image
Posted Image
Posted Image
Posted Image
Posted Image

When ordering please make sure to select the primary color as the first leather color and the color of the piping as the secondary leather color.

Another special finishing we offer is QUADRUPLE THREAD. The idea is simple - there are four rows of thread instead of two, and you can choose both the color of the two inside threads, as well as the color of the outside threads. They can all be the same color, but they don't have to - which gives a vast array of visual effects:

Posted Image
Posted Image
Posted Image
Posted Image
Posted Image
Posted Image
Posted Image



#2 the commissar!

the commissar!

    Level 3 Member

  • Lifetime Supporter
  • 2,024 posts
  • Gender:Male
  • Interests:interesting things...varies with temperature and altitude
  • Location:Prosperity SC
  • Crew:ECC

Posted 26 January 2012 - 01:26 PM

Sexy!

Need to develop some 850 and x70 stuff...like seats & armrests, shift & brake boots, door panel inserts...
1998 V70 T-5 -Auto / Pewter - Turbo-Tuner,18T, HD TCVw/ Hallman Pro MBC, custom 3" DP w/ Volvo 2.75" sport catback - both wrapped and coated, RIP, IPD aluminum intercooler, intake w/ K&N cone, R ex. manifold, , gasket matched & polished intake manifold w/ thermoblock spacer, n/a TB w/ 960 plate, Optima bluetop, MSD 6aD and blaster coil, IPD plug wires, IPD poly bushing, Koni FSD w/ Eibach springs, IPD sways 25mm x 25 mm, blue silicone vac, silicone coolant lines, custom intake tubes grill to turbo, skid plate, front lower brace, cherry turbo strut brace, HD endlinks, 302mm brakes, Zeitronix wide-band/data-logger, Walbro w/variable fpr. In process: Home grown HD Endlinks, Meth/H2O injection, greens, catch can, fully built 2.3.
Posted ImagePosted Image

#3 -Matt01

-Matt01

    Level 1 Member

  • Members
  • Pip
  • 412 posts
  • Gender:Male
  • Location:Montreal, Quebec
  • Crew:___

Posted 26 January 2012 - 03:34 PM

View Postthe commissar!, on 26 January 2012 - 01:26 PM, said:

Sexy!

Need to develop some 850 and x70 stuff...like seats & armrests, shift & brake boots, door panel inserts...
x2 on that stuff.

Posted Image

Quote

Same with the AWD... if you don't actually own one, or never have, or plan to do so, then shut your pie hole.


#4 RedlineGoods

RedlineGoods

    Level 1 Member

  • Vendor
  • 52 posts

Posted 26 January 2012 - 04:18 PM

Hi

I definitely want to! Whoever wants to work with us on these in compensation for free pieces, please let us know!

Have a great day,
Maciek

#5 the commissar!

the commissar!

    Level 3 Member

  • Lifetime Supporter
  • 2,024 posts
  • Gender:Male
  • Interests:interesting things...varies with temperature and altitude
  • Location:Prosperity SC
  • Crew:ECC

Posted 26 January 2012 - 05:53 PM

pm sent
1998 V70 T-5 -Auto / Pewter - Turbo-Tuner,18T, HD TCVw/ Hallman Pro MBC, custom 3" DP w/ Volvo 2.75" sport catback - both wrapped and coated, RIP, IPD aluminum intercooler, intake w/ K&N cone, R ex. manifold, , gasket matched & polished intake manifold w/ thermoblock spacer, n/a TB w/ 960 plate, Optima bluetop, MSD 6aD and blaster coil, IPD plug wires, IPD poly bushing, Koni FSD w/ Eibach springs, IPD sways 25mm x 25 mm, blue silicone vac, silicone coolant lines, custom intake tubes grill to turbo, skid plate, front lower brace, cherry turbo strut brace, HD endlinks, 302mm brakes, Zeitronix wide-band/data-logger, Walbro w/variable fpr. In process: Home grown HD Endlinks, Meth/H2O injection, greens, catch can, fully built 2.3.
Posted ImagePosted Image

#6 -Matt01

-Matt01

    Level 1 Member

  • Members
  • Pip
  • 412 posts
  • Gender:Male
  • Location:Montreal, Quebec
  • Crew:___

Posted 26 January 2012 - 09:25 PM

im not located in the states, if i was, id be interseted.

Posted Image

Quote

Same with the AWD... if you don't actually own one, or never have, or plan to do so, then shut your pie hole.


#7 Bah

Bah

    Level 3 Member

  • Members
  • PipPipPip
  • 1,565 posts
  • Gender:Male
  • Interests:Money, 850's, Computers, Women.
    Computer Engineering at University of Florida. Dig it
  • Location:Florida(Jacksonville/Gainseville)
  • Crew:___

Posted 27 January 2012 - 03:10 AM

Definitely would love to see some 850 pieces.

I would think our middle console cover would be one of the easiest pieces, as the 95+ version is soft and could easily be rewrapped, vs the 93/94 where it was that hard plastic. Love to see it in a nice leather or even alcantara to match my charcoal 850R , since the grey leather has seen its days :(
I live in Sunny Fl..Home of the beach!! (And Rust! )

1993 850 GLT - My Baby, Lanier
1996 850 R - My Love, Suwanee

VS for life

#8 Patdon10

Patdon10

    Level 1 Member

  • Members
  • Pip
  • 162 posts
  • Gender:Male
  • Location:Atlanta, Ga
  • Crew:___

Posted 27 January 2012 - 09:31 AM

x3 on the XC70 Pieces!

#9 RedlineGoods

RedlineGoods

    Level 1 Member

  • Vendor
  • 52 posts

Posted 27 January 2012 - 02:40 PM

View PostPatdon10, on 27 January 2012 - 09:31 AM, said:

x3 on the XC70 Pieces!

Hi

all I need is a guinea pig who wants some freebies! More info here: http://www.redlinego...supported2.shtm

There's a user on this forum who already did it who can confirm that we're for real :)

View PostBah, on 27 January 2012 - 03:10 AM, said:

Definitely would love to see some 850 pieces.

I would think our middle console cover would be one of the easiest pieces, as the 95+ version is soft and could easily be rewrapped, vs the 93/94 where it was that hard plastic. Love to see it in a nice leather or even alcantara to match my charcoal 850R , since the grey leather has seen its days :(

as above. I am ALWAYS open to doing new items. If you are interested enough to go for loaning us yours in exchange for free leather ones, please let me know!

View Post-Matt01, on 26 January 2012 - 09:25 PM, said:

im not located in the states, if i was, id be interseted.

FWIW neither is our R&D, it's in Europe. So it really doesn't matter which side of the Niagara falls these are shipped to us from ;)

We have done lots of projects with Canadian customers.

Have a great day,
Maciek

Edited by RedlineGoods, 27 January 2012 - 02:41 PM.


#10 RedlineGoods

RedlineGoods

    Level 1 Member

  • Vendor
  • 52 posts

Posted 27 January 2012 - 06:01 PM

Guys&Girls

Posted Image

'nuff said… :)

Maciek&Jack
RedlineGoods.com Team

#11 Martijn_B

Martijn_B

    Newbie

  • Members
  • 11 posts

Posted 27 January 2012 - 07:10 PM

If you create the T-5R one in alcantara (+ the armrest too) im sure people will buy it here in Holland!

#12 Ghost Shadow

Ghost Shadow

    Level 4 Member

  • Lifetime Supporter
  • 3,141 posts
  • Gender:Male
  • Interests:testing
  • Location:South Eastern, PA USA
  • Crew:NEC

Posted 27 January 2012 - 07:37 PM

going to send you the arm rest and shift boot from x70 car, and one from a 850
You want Volvospeed stickers?--->http://tinyurl.com/7axjudr
2003 Nautic Blue XC90 T6 3rd tranny - 167k Modded http://tinyurl.com/74pwukq
2001 Nautic Blue C70 T5 Manual - 93k Not stock at all http://tinyurl.com/75zhepq
SOLD 98 Olive Green V70 T5M http://tinyurl.com/85mh7z3 97 850R BTCC http://tinyurl.com/7rx7naw

#13 RedlineGoods

RedlineGoods

    Level 1 Member

  • Vendor
  • 52 posts

Posted 28 January 2012 - 12:46 PM

View PostMartijn_B, on 27 January 2012 - 07:10 PM, said:

If you create the T-5R one in alcantara (+ the armrest too) im sure people will buy it here in Holland!

Hi

you mean shift boot or wheel? If shift boot is what you mean, Ghost Shadow is sending us one.I'm not sure if his is T-5R, do you know if there are differences between different trim levels of the 850?

Have a great day,
Maciek

#14 Bah

Bah

    Level 3 Member

  • Members
  • PipPipPip
  • 1,565 posts
  • Gender:Male
  • Interests:Money, 850's, Computers, Women.
    Computer Engineering at University of Florida. Dig it
  • Location:Florida(Jacksonville/Gainseville)
  • Crew:___

Posted 28 January 2012 - 05:49 PM

Posted Image

That one is in AWESOME condition! But regardless, that is the 850 center console lid that i think most people would be interested in. That should be present on all higher trims 95+ with the upgraded cupholders.
I live in Sunny Fl..Home of the beach!! (And Rust! )

1993 850 GLT - My Baby, Lanier
1996 850 R - My Love, Suwanee

VS for life

#15 RedlineGoods

RedlineGoods

    Level 1 Member

  • Vendor
  • 52 posts

Posted 28 January 2012 - 05:59 PM

Anybody willing to take the skin off one and loan it to me in exchange for a free leather one?

Have a great day,
Maciek

#16 Ghost Shadow

Ghost Shadow

    Level 4 Member

  • Lifetime Supporter
  • 3,141 posts
  • Gender:Male
  • Interests:testing
  • Location:South Eastern, PA USA
  • Crew:NEC

Posted 28 January 2012 - 07:46 PM

This is what I am going to do, I am going to send you the following stuff.

One e brake boot from 98-00 s70/V70 or 9898-04 V70 and shift boot for same car.

One armrest for same car add above and this one also is found in 96-97 850. Many people end up upgrading to this newer style if they have 93-95 76ers850s

One steering wheel for 94-97 850
One steering wheel for 98-00 s70/v70 or 98-04 C70
One steering wheel for 01-07 iirc s60/v70/xc90 three spoke wheel with the steering wheel controls, note that these years the cars also came with 4 spoke wheels too. The 3 spoke ones are usually in the premium packaged cars or "R" cars.

That should get you a good start!
Pm you later, when I get home, right now I am in a parking lot of a pick and pull junk yard:-)
You want Volvospeed stickers?--->http://tinyurl.com/7axjudr
2003 Nautic Blue XC90 T6 3rd tranny - 167k Modded http://tinyurl.com/74pwukq
2001 Nautic Blue C70 T5 Manual - 93k Not stock at all http://tinyurl.com/75zhepq
SOLD 98 Olive Green V70 T5M http://tinyurl.com/85mh7z3 97 850R BTCC http://tinyurl.com/7rx7naw

#17 RedlineGoods

RedlineGoods

    Level 1 Member

  • Vendor
  • 52 posts

Posted 29 January 2012 - 12:30 AM

Steve, that sounds AWESOME!

Have a great day,
Maciek

#18 -Matt01

-Matt01

    Level 1 Member

  • Members
  • Pip
  • 412 posts
  • Gender:Male
  • Location:Montreal, Quebec
  • Crew:___

Posted 29 January 2012 - 06:16 AM

x2 on the steering wheel, need a new one badly

Posted Image

Quote

Same with the AWD... if you don't actually own one, or never have, or plan to do so, then shut your pie hole.


#19 RedlineGoods

RedlineGoods

    Level 1 Member

  • Vendor
  • 52 posts

Posted 03 February 2012 - 08:49 PM

Hi

our new Alcantara (charcoal, color 9002) on a BMW E36 steering wheel with M-stitching:
Posted Image
Posted Image
Posted Image
Posted Image
Posted Image

And here is the code: ZTH8L416T30 - valid through Friday, February 10th!

Have a great day,
Maciek & Jack
Team RedlineGoods


#20 -Matt01

-Matt01

    Level 1 Member

  • Members
  • Pip
  • 412 posts
  • Gender:Male
  • Location:Montreal, Quebec
  • Crew:___

Posted 04 February 2012 - 05:19 AM

what does that go for? just curious.

Posted Image

Quote

Same with the AWD... if you don't actually own one, or never have, or plan to do so, then shut your pie hole.





0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users

IPD Volvo Parts


Copyright 2012 Volvospeed