Im wanting to do an FMIC custom setup on my '97 854, while not "advertising" and keeping the front as close to OEM looking as possible. I figure the best way to go about this and maintain good airflow is to install it directly behind the grill(black eggcrate with 07' S80 slash emblem) rather than below the bumper beam. This setup would also use significantly less piping, good for lag and what-not.
Has anyone done this or a write up on it? Did a fair amount of searching but all the installs are below the bumper beam. Any help is appreciated.
10 replies to this topic
#1
JasonC
-
- Members
-
- 62 posts
Level 1 Member
Posted 15 March 2012 - 07:23 PM
1997 854 T5 :: M56, ipd SR5-T, SNABB Turbo Inlet Pipe, SNABB Poly manifold spacer, NA Cams, OBX exhaust, Turbosmart Dual Stage MBC, 4 bar FPR, MSD Digital 6 Plus, Blaster SS Coil, Bilstein HD's, ipd Blues
2005 Chevrolet Uplander LT(The Man Van!!)
#2
Hanks
-
- Supporting Member
-
- 3,496 posts
Level 4 Member
Posted 15 March 2012 - 07:27 PM
There really isn't enough room to fit a proper sized intercooler in that area. For a stock look below the bumper you can hit it with a light coat of flat black paint or do it proper and get a thermal dispersion coating.
Edited by Hanks, 15 March 2012 - 07:36 PM.
-Kevin-
2004 V70R: 3 angle valve job, Phuzzy FMIC, IPD Neutral rear sway
White '96 850 T5M:Black '94 850 T5
#3
boxpin
-
- Gold Member
-
- 1,611 posts
Old Man Crew Psyllium pusher
Posted 15 March 2012 - 07:31 PM
If you want to keep it there you should go with a larger intercooler such as IPD's, etc.
20G, ARD Black, 342whp/403bhp
#4
sconeman
-
- Vendor
-
- 4,387 posts
Level 4 Member
Posted 15 March 2012 - 08:03 PM
you can't really see it that well in the bumber opening of an 850 anyway IMO
search for Ian Carr's thread on his fmic that's the only one that comes to mind in that location
search for Ian Carr's thread on his fmic that's the only one that comes to mind in that location
----PERFORMANCE VOLVO PARTS----
#5
BlackT5
-
- Supporting Member
-
- 6,130 posts
NWC Rod Bender
Posted 15 March 2012 - 08:05 PM
If you want to keep it hidden in the bumper just give it a light coat of black rad paint.
1998 S70 T5M - Project BlackT5 1999 XC70 - Rebuilding or parting.
2000 V70R - B5234T3 & M66 swapped 2005 S60R - Rebuilding or parting
1998 V70R- M58 swap cancelled.. sold 2000 Hyundai Accent - Fuel saver
1998 XC70 - Sold 1994 Ford Exploder - Winter beater
#6
JasonC
-
- Members
-
- 62 posts
Level 1 Member
Posted 15 March 2012 - 08:52 PM
I like the blacked out look. How is the airflow without cutting the bumper? I may just go that route if nothing else works.
One of the big plus sides though would be reduced intercooler piping which makes a big difference to me, driveability wise.
Question: How about a custom intercooler with end tanks fabbed to fit? Maybe with removing the oem intercooler and moving the a/c condenser right up against the radiator? What would the cost for a custom intercooler like that run? I have no clue. Been trying to call a well repped local shop but they're pretty busy, tax season and all(everyone with they're refunds lol)
One of the big plus sides though would be reduced intercooler piping which makes a big difference to me, driveability wise.
Question: How about a custom intercooler with end tanks fabbed to fit? Maybe with removing the oem intercooler and moving the a/c condenser right up against the radiator? What would the cost for a custom intercooler like that run? I have no clue. Been trying to call a well repped local shop but they're pretty busy, tax season and all(everyone with they're refunds lol)
1997 854 T5 :: M56, ipd SR5-T, SNABB Turbo Inlet Pipe, SNABB Poly manifold spacer, NA Cams, OBX exhaust, Turbosmart Dual Stage MBC, 4 bar FPR, MSD Digital 6 Plus, Blaster SS Coil, Bilstein HD's, ipd Blues
2005 Chevrolet Uplander LT(The Man Van!!)
#7
Timbo Slice
-
- Supporting Member
-
- 1,884 posts
Tim
Posted 15 March 2012 - 11:08 PM
If you're interested in an Intercooler I have a black Mishimoto one for sale that I didn't end up using. PM me if you're interested.
'98 T5m '99 C70 T5 '91 245 '01 S40 '01 S40
Want a custom longboard? PM me!
#8
SeedyRom
-
- Supporting Member
-
- 604 posts
Level 2 Member
Posted 16 March 2012 - 02:04 AM
I like the blacked out look. How is the airflow without cutting the bumper? I may just go that route if nothing else works.
One of the big plus sides though would be reduced intercooler piping which makes a big difference to me, driveability wise.
Question: How about a custom intercooler with end tanks fabbed to fit? Maybe with removing the oem intercooler and moving the a/c condenser right up against the radiator? What would the cost for a custom intercooler like that run? I have no clue. Been trying to call a well repped local shop but they're pretty busy, tax season and all(everyone with they're refunds lol)
I would use this as a starting point: http://www.ipdusa.co...850-c70-s70-v70 .
If it costs more than IPD's direct replacement intercooler, than it's not worth it. I don't think anyone else makes a custom intercooler anyways. If you are planning on getting an one-off, just make sure it's less than the IPD one.
98 S70 T5A - 18t - FMIC - ARD Blue Tune - AC Delco TCV - OBX Turboback - 150k+ miles
#9
Commander Riker
-
- Lifetime Supporter
-
- 2,803 posts
Level 3 Member
Posted 16 March 2012 - 02:10 AM
I agree with BlackT5. I think the blacked out look is most stealth.
1998 V70 R AWD - M66 & 2.5T RN swapped - Stage 2
2007 Dodge Ram 1500 QC (Daily)
#10
kalvin
-
- Lifetime Supporter
-
- 2,363 posts
Level 3 Member
Posted 16 March 2012 - 02:32 AM
PM RZT5 about a drop in intercooler.
96 855T - (Radio Flyer) #thelittleredwagon
ARD Green w/M4.4, 302mm Brakes, "Modified" D2 Racing Coilovers, Cherry Turbos Strut Brace, iPd Sways 25/25, Fujita Intake, Snabb Intake Pipe, RZ Design Intercooler, NA TB+960 plate, NA Intake Manifold, iPd Phenolic Intake Spacer, 2.5" Magnaflow Catback
#11
T5Hammy
-
- Members
-
- 342 posts
Dick Sledge
Posted 16 March 2012 - 07:03 PM
I like the blacked out look. How is the airflow without cutting the bumper? I may just go that route if nothing else works.
One of the big plus sides though would be reduced intercooler piping which makes a big difference to me, driveability wise.
Question: How about a custom intercooler with end tanks fabbed to fit? Maybe with removing the oem intercooler and moving the a/c condenser right up against the radiator? What would the cost for a custom intercooler like that run? I have no clue. Been trying to call a well repped local shop but they're pretty busy, tax season and all(everyone with they're refunds lol)
Keep 2.25 piping and you wont be able to tell a noticable difference in lag, black it out for stealth and airflows just fine with the stock bumper opening. If that doesn't work for you do as kalvin said, Rye is a great guy and knows his stuff!
1998 s70 t5- auto
, Stage 0, kw var 3, Ipd short ram, N/A TB from Snabb, FMIC 29x9x3, OBX exhaust, 18" Ipd pegs flat black, black projectors, aux tranny cooler.
