factory volvo key fobs where i work used to be a volvo dealer and some of the left over inventory was a bag of factory key fobs. there brand new volvo parts. they may need new batters from sitting on the shelf for so long. they will need to be programed by the volvo dealer. can be found here on amazon
https://www.amazon.com/dp/B01M28NQXR?ref=myi_title_dp

set of 4 s60r 18" wheels off 2012 s60r, center has been bored out buy a wheel shop to 65.1 mm to fit older 850, v70 and s70.
rims are not bent and in great shape 600$ located in concord California
can be seen here https://sfbay.craigslist.org/eby/pts/d/concord-volvo-keyfobs-s60r-rims/6964383047.html

98 99 00 01 02 03 04 VOLVO S70 S40 S80 V40 KEYLESS ENTRY KEY FOB OEM

https://www.amazon.com/VOLVO-S70-S40-KEYLESS-ENTRY/dp/B01M28NQXR/ref=olp_product_details?_encoding=UTF8&me=

1999 V70 R - Needed a VS build thread.

Wagon is a Canadian, originally tested by a rental car company and thankfully for me was rejected. Purchased in 2012 I'm the third owner. Vehicle thad a full service history that would put other anal Volvo owners to shame.

Mods list run down

Suspension/Brakes:
Ohlins Road holding kit Front - Rebuilt by PSI, Performance Shock Inc in California.
Ohlins Road holding kit Rear 
TME Awd Springs -
IPD Front 25mm Sway bar
IPD Rear Bar
IPD Strut tower brace
Solid-ish Top engine mount
Poly Firewall Mount.
Ceika 330mm large 6pot Front set  -Street Grey Pads
Porsche 330mm 4pot rear brakes  - Textar Porsche 996 Pads
Engine/Exhaust:
Stev0 Tune running 20-24
BW EFR 7064 Turbo Smart CBV and Dual port wastegate
Snabb Reverse intercooler piping kit
Custom Inlet tube mated to 3.5" maf housing
VR exhaust manifold - Milled Flat to fit T3 Turbo
Custom DP from Aaron
Magnaflow rear mufflers
Do88 intercooler -
Do88 Rad

Wheels:
Borbet LV5 with Bridgestone Potenzas.

Many thanks to Bmac,Steve, Hussein, and anyone else for answering the endless questions.
 
Day 01:
Car came with its drive shaft pre-removed but included. 12 total wheels and tires, a brand new set of R mats in the volvo box, and a stack of service receipts totaling 26,000 CAD.

Purchased at 121,000 miles currently 152k on everything.




March 2014 - Acquired many nice parts through the winter. Met Bmac and got everything installed and then had Steve tune it the same evening. Long day but everything has held together like new since then.
 
Snabb kit was a oh yeah! to install, lower pipe need to sit just right to make it all work.

 
 
18" of space was nice but we almost needed more.

Clamshell was not surprisingly rusted closed.

ugly ugly welds but it went in perfectly. Did require cutting the old downpipe to clear the angle gear.



Bens BIG turbo


Manifold and turbo and exhaust removed.


Nice new nuts and reused the washers.


Huge difference in design.


Sway bars are such a nice improvement on this car
Reused a front bar from VS, rear can be had new without buying the set (just ask)


Practice Safe Turboing



May '14

Tint and Clear Bra - No surprise it doesn't show up in pictures. The Tint Shop of Rochester NY did a great job. Happy to protect the newly painted front end. (barely visible below)

'Winning' Only two volvos that weekend so I can't be too happy.




Summer 2014
Fitting some poly bushings to rattle my fillings out.


Sticker from the EST customer bbq day


Nice little paint job under the hood


 
Nothing Special but it does the job

 
 
March 2015
Prep the Front shocks for service
Found a guide form what what i can't believe is 10 years ago. Thankfully the pictures are still up http://v70r.com/forums/topic/1667-ohlins-strutspring-install/
Had to get a offset box wrench but it was really the only tool for the job.





Rear set still brand new in box. Really excited to get this all in and be on the road

 
 
Not sure if VS works this way but Saving this space for suspension and brakes when they go on.
 

SO
Just made an account, hello all
Tryna do some work on my '98 V70R, the timing belt is from 2006 I think, rear brakes are sitting at 10% (So sayeth the local mechanic).
Gonna pick up the Power Stop Z23 Performance D/S Rotor and pad kit. Couldn't find any note in the service records of the rear calipers ever being replace, (and the first guy who had this car put nearly 18 grand into it) does it need to be done? 
Also is this timing belt a problem? From what I've read, if it breaks, its a bad time :(
 
Thanks all in advance. Pretty green to mechanic-ing
Oh shitters, I posted it twice. Off to a bad start

SO
Just made an account, hello all
Tryna do some work on my '98 V70R, the timing belt is from 2006 I think, rear brakes are sitting at 10% (So sayeth the local mechanic).
Gonna pick up the Power Stop Z23 Performance D/S Rotor and pad kit. Couldn't find any note in the service records of the rear calipers ever being replace, (and the first guy who had this car put nearly 18 grand into it) does it need to be done? 
Also is this timing belt a problem? From what I've read, if it breaks, its a bad time :(
 
Thanks all in advance. Pretty green to mechanic-ing