• ×   Pasted as rich text.   Paste as plain text instead

      Only 75 emoji are allowed.

    ×   Your link has been automatically embedded.   Display as a link instead

    ×   Your previous content has been restored.   Clear editor

    ×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Content

    • By lowbudgetracing
      factory volvo key fobs where i work used to be a volvo dealer and some of the left over inventory was a bag of factory key fobs. there brand new volvo parts. they may need new batters from sitting on the shelf for so long. they will need to be programed by the volvo dealer. can be found here on amazon
      https://www.amazon.com/dp/B01M28NQXR?ref=myi_title_dp

      set of 4 s60r 18" wheels off 2012 s60r, center has been bored out buy a wheel shop to 65.1 mm to fit older 850, v70 and s70.
      rims are not bent and in great shape 600$ located in concord California
      can be seen here https://sfbay.craigslist.org/eby/pts/d/concord-volvo-keyfobs-s60r-rims/6964383047.html
    • By n8t50
      Hi folks, looking for some help with a misfire/sputter on a 1998 V70 N/A (537xxxkm). Car was throwing some codes for the rear O2 sensor, but wasn't doing anything funny. Coming back from a camping trip, it started to misfire/sputter while cruising at 100km/h in 5th gear. It then started stalling out while at idle. I replaced the rear sensor, and shortly after, it started to throw codes for the front O2 sensor (slow response, and lean mixture), and do the same thing.
      It is fine on startup, but sometimes will have little fits of stalling at idle, and sputtering/missing when accelerating/cruising. When it would stall, I used to be able to get it too restart on the first try, but now it usually takes 2-4 cycles of the ignition to get it to catch. Once I give it some gas and take off, it improves a little, and just seems to lack a little power. When at idle, you can also smell the exhaust, which normally is very clean.
      Today I replaced the front O2 sensor. The car ran well for 30min, then threw the same codes, and started acting up again. I've tested the PCV and the compression, and both are fine. The spark plugs are new, but the rest of the ignition system (Coils, leads, rotor) are older. I'm thinking this sounds like either an ignition system problem, or a fuel system. I'm not sure how to run the normal relay test, because it it is really intermittent with its sputtering/stalling. (Currently there seems to be about a 50/50 chance of it being fine, or acting up when I take it out) I'm probably going to redo the ignition system, because the car needs it anyways, but am wondering what else this could be.
      Thanks guys!
    • By cryptophilosopher
      98 99 00 01 02 03 04 VOLVO S70 S40 S80 V40 KEYLESS ENTRY KEY FOB OEM

      https://www.amazon.com/VOLVO-S70-S40-KEYLESS-ENTRY/dp/B01M28NQXR/ref=olp_product_details?_encoding=UTF8&me=
    • By ovlov780t
      Here she is. Putting her up for sale. All offers will be considered. 
      https://losangeles.craigslist.org/sfv/cto/d/1998-volvo-s70-t5-manual/6705737681.html 
       
    • By cryptophilosopher
      selling a set of s60r wheels 18"/7" great condition, straight center hub was bored to 65.1 mm for use on my 98 v70  will fit any volvo with a 65.1 hub or smaller. $800
       
      selling remote fobs, these are all new in box .  the battery's may need to be replaced $25
      i work at a former Volvo dealer and these were some of the inventory left behind 
       
      launch x431 scanner , lightly used  looks new i have all parts and papers, im the original ower and can transfer ownership to you with launch. upgrade able software. matco  sells these scanners now
       
      have original volvo scanner for 96-2000 volvos  v70, s70 ,850 , 740, 960, and others in that time frame. can be used for code reading, date and key programing.
       
      willing to ship, shipping on fobs is $10   the scanner and wheels i need to get a estimate   crypto currency  bitcoin  accepted. email me cryptophilosopher@gmail.com parts are located in concord california