Hello all,
i've been having a bad smell in the comaprtment after The car get into operating temperatur and especialy when i drive the car hard. my guess is that it's the smell of vaporized oil. i'm loosing oil also about 1liter/1500Km.
this is a N/A car so no turbo leak . i see oil on the top of the engine near the oil cap but not a pool just oil residue. i've changed the oil cap rubber ring but no improvement.
i have also higher than usual fuel consumption i noticed that after cleaning my fuel injectors.
car: volvo sedan 1995 850 GLE
what do u advise?
0
Bad Smell+ Oil Loss
Started by highhighs, Mar 08 2006 05:47 PM
-
This topic is locked
9 replies to this topic
#1
highhighs
-
- Members
-
- 131 posts
Level 1 Member
Posted 08 March 2006 - 05:47 PM
Volvo 850 GLE 1995 sedan
HU: JVC KD-G801
4 channel amp:
Pioneer GM-4000F 140Watts rms amp bridge into 2 channels at 70 watts rms
USAcoustics USC2100 300w rms (bridged)
12" JBL GT4-12 sealed box 1qft with dacron fill.
6.5" Earthquake Focuse6.5 2 way speakers kickpods up front.
HU: JVC KD-G801
4 channel amp:
Pioneer GM-4000F 140Watts rms amp bridge into 2 channels at 70 watts rms
USAcoustics USC2100 300w rms (bridged)
12" JBL GT4-12 sealed box 1qft with dacron fill.
6.5" Earthquake Focuse6.5 2 way speakers kickpods up front.
#2
James100
-
- Members
-
- 874 posts
Level 2 Member
- Location:Los Angeles, CA
- Crew:CFL
Posted 08 March 2006 - 07:30 PM
QUOTE(highhighs @ Mar 8 2006, 09:47 AM) 
. i've changed the oil cap rubber ring but no improvement.
car: volvo sedan 1995 850 GLE
what do u advise?
car: volvo sedan 1995 850 GLE
what do u advise?
One of your fixes is = you need a new oil fill cap($12 at dealer)..Just the gasket alone does not fix the problem .
I would look under the car for oil leaks and clean as much off as you can with rags as a start....
1994 Volvo 850 Turbo Automatic 160K
[Autometer Sport/Comp boost gauge] [Silicone Vacuum Hoses][Magnefine PS Filter]
[IPD Torque Rod Mount] [Yokohama YK520][IPD HD-Links]
[Walbro Fuel Pump 5CA3351-1 160K] [PCV System + Air Intake Hose 160K]
[Magnaflow Cat 94105 160K ][Injectors Cleaned/Rebuilt 160k][Motive Brake Fluid Flush]
________________________________________________________________________________
Check Engine Codes OBDI
Resetting CEL and Service Light
Stage 0
PCV Pics
[Autometer Sport/Comp boost gauge] [Silicone Vacuum Hoses][Magnefine PS Filter]
[IPD Torque Rod Mount] [Yokohama YK520][IPD HD-Links]
[Walbro Fuel Pump 5CA3351-1 160K] [PCV System + Air Intake Hose 160K]
[Magnaflow Cat 94105 160K ][Injectors Cleaned/Rebuilt 160k][Motive Brake Fluid Flush]
________________________________________________________________________________
Check Engine Codes OBDI
Resetting CEL and Service Light
Stage 0
PCV Pics
#3
highhighs
-
- Members
-
- 131 posts
Level 1 Member
Posted 08 March 2006 - 08:00 PM
thanks mate, first thing in the morning i'll go get one
Volvo 850 GLE 1995 sedan
HU: JVC KD-G801
4 channel amp:
Pioneer GM-4000F 140Watts rms amp bridge into 2 channels at 70 watts rms
USAcoustics USC2100 300w rms (bridged)
12" JBL GT4-12 sealed box 1qft with dacron fill.
6.5" Earthquake Focuse6.5 2 way speakers kickpods up front.
HU: JVC KD-G801
4 channel amp:
Pioneer GM-4000F 140Watts rms amp bridge into 2 channels at 70 watts rms
USAcoustics USC2100 300w rms (bridged)
12" JBL GT4-12 sealed box 1qft with dacron fill.
6.5" Earthquake Focuse6.5 2 way speakers kickpods up front.
#4
James100
-
- Members
-
- 874 posts
Level 2 Member
- Location:Los Angeles, CA
- Crew:CFL
Posted 08 March 2006 - 08:36 PM
You might want to look into getting Rhino Ramps if you are going to be going under the car alot...They are low cut....$20 to $30 in U.S.
1994 Volvo 850 Turbo Automatic 160K
[Autometer Sport/Comp boost gauge] [Silicone Vacuum Hoses][Magnefine PS Filter]
[IPD Torque Rod Mount] [Yokohama YK520][IPD HD-Links]
[Walbro Fuel Pump 5CA3351-1 160K] [PCV System + Air Intake Hose 160K]
[Magnaflow Cat 94105 160K ][Injectors Cleaned/Rebuilt 160k][Motive Brake Fluid Flush]
________________________________________________________________________________
Check Engine Codes OBDI
Resetting CEL and Service Light
Stage 0
PCV Pics
[Autometer Sport/Comp boost gauge] [Silicone Vacuum Hoses][Magnefine PS Filter]
[IPD Torque Rod Mount] [Yokohama YK520][IPD HD-Links]
[Walbro Fuel Pump 5CA3351-1 160K] [PCV System + Air Intake Hose 160K]
[Magnaflow Cat 94105 160K ][Injectors Cleaned/Rebuilt 160k][Motive Brake Fluid Flush]
________________________________________________________________________________
Check Engine Codes OBDI
Resetting CEL and Service Light
Stage 0
PCV Pics
#5
highhighs
-
- Members
-
- 131 posts
Level 1 Member
Posted 08 March 2006 - 09:24 PM
will look into that but i have to find a dealer since i'm not a resident of the US
Volvo 850 GLE 1995 sedan
HU: JVC KD-G801
4 channel amp:
Pioneer GM-4000F 140Watts rms amp bridge into 2 channels at 70 watts rms
USAcoustics USC2100 300w rms (bridged)
12" JBL GT4-12 sealed box 1qft with dacron fill.
6.5" Earthquake Focuse6.5 2 way speakers kickpods up front.
HU: JVC KD-G801
4 channel amp:
Pioneer GM-4000F 140Watts rms amp bridge into 2 channels at 70 watts rms
USAcoustics USC2100 300w rms (bridged)
12" JBL GT4-12 sealed box 1qft with dacron fill.
6.5" Earthquake Focuse6.5 2 way speakers kickpods up front.
#6
prasamin
-
- Supporting Member
-
- 16,242 posts
Bipedal Magnaflux
- Gender:Male
- Location:Dallas and India
- Crew:MWC
Posted 09 March 2006 - 03:16 AM
Lebanon? wow, that could make things difficult to find!
get under the car, and see if you see any oil seeping out underneath.
could be a blown RMS, or check if the oil is coming from the front or back of the block, on top of the engine. cam seals can leak too.
get under the car, and see if you see any oil seeping out underneath.
could be a blown RMS, or check if the oil is coming from the front or back of the block, on top of the engine. cam seals can leak too.
#7
highhighs
-
- Members
-
- 131 posts
Level 1 Member
Posted 09 March 2006 - 05:24 AM
will do that thanks.
I found a DIY ramp :http://www.mustangworld.com/ourpics/News/mwramps/
i think i will try to do these
I found a DIY ramp :http://www.mustangworld.com/ourpics/News/mwramps/
i think i will try to do these
Volvo 850 GLE 1995 sedan
HU: JVC KD-G801
4 channel amp:
Pioneer GM-4000F 140Watts rms amp bridge into 2 channels at 70 watts rms
USAcoustics USC2100 300w rms (bridged)
12" JBL GT4-12 sealed box 1qft with dacron fill.
6.5" Earthquake Focuse6.5 2 way speakers kickpods up front.
HU: JVC KD-G801
4 channel amp:
Pioneer GM-4000F 140Watts rms amp bridge into 2 channels at 70 watts rms
USAcoustics USC2100 300w rms (bridged)
12" JBL GT4-12 sealed box 1qft with dacron fill.
6.5" Earthquake Focuse6.5 2 way speakers kickpods up front.
#8
highhighs
-
- Members
-
- 131 posts
Level 1 Member
Posted 27 March 2006 - 10:00 AM
i checked today the car after driving it, and there was oil on the outside of the dipstick tube and when i remove it there were smoke comming out of the tube. this is the signe of what, how should i proceed to resolve the oil loss problem?
Thank you all
Thank you all
Volvo 850 GLE 1995 sedan
HU: JVC KD-G801
4 channel amp:
Pioneer GM-4000F 140Watts rms amp bridge into 2 channels at 70 watts rms
USAcoustics USC2100 300w rms (bridged)
12" JBL GT4-12 sealed box 1qft with dacron fill.
6.5" Earthquake Focuse6.5 2 way speakers kickpods up front.
HU: JVC KD-G801
4 channel amp:
Pioneer GM-4000F 140Watts rms amp bridge into 2 channels at 70 watts rms
USAcoustics USC2100 300w rms (bridged)
12" JBL GT4-12 sealed box 1qft with dacron fill.
6.5" Earthquake Focuse6.5 2 way speakers kickpods up front.
#9
ziddey
-
- Members
-
- 1,005 posts
Level 3 Member
Posted 27 March 2006 - 06:38 PM
QUOTE(highhighs @ Mar 27 2006, 05:00 AM)
i checked today the car after driving it, and there was oil on the outside of the dipstick tube and when i remove it there were smoke comming out of the tube. this is the signe of what, how should i proceed to resolve the oil loss problem?
Thank you all
Thank you all
That's a sign that your PCV system isn't functioning. You definitely need to get that addressed before (hopefully it didn't already happen) your rear main seal (rms) lets go. It could be a simple vacuum line to the pcv system that's shot. I don't have a link on hand but I'm sure you'll find a lot if you search this forum for pcv system. In my case, I was lucky that the pcv was fine but it was just a vacuum line that connects to it that was broken. If you fix the pcv system, there shouldn't be smoke coming out the dipstick tube anymore.
And don't worry about the oil cap if you haven't bought one yet. If you fix the pcv, it won't be blowing oil up there that much so it shouldn't go out the cap anymore
94 855t
dawes mbc @ 12-15psi depending on climate (Darn cutout)
dirty k+n cone + kevin's old ghettorigged heatshield (need to move onto slater's "ghetto" style setup)
bfg trac t/a 205/50/16s (pretty decent for a standard tire but they're no toyo)
dawes mbc @ 12-15psi depending on climate (Darn cutout)
dirty k+n cone + kevin's old ghettorigged heatshield (need to move onto slater's "ghetto" style setup)
bfg trac t/a 205/50/16s (pretty decent for a standard tire but they're no toyo)
QUOTE(jaxx @ Mar 30 2006, 12:54 PM)
if you want to go fast, you want to die, if you want to die, don't buy a volvo ;)
#10
highhighs
-
- Members
-
- 131 posts
Level 1 Member
Posted 27 March 2006 - 06:59 PM
Thank you. i'll research the PCV thing
Volvo 850 GLE 1995 sedan
HU: JVC KD-G801
4 channel amp:
Pioneer GM-4000F 140Watts rms amp bridge into 2 channels at 70 watts rms
USAcoustics USC2100 300w rms (bridged)
12" JBL GT4-12 sealed box 1qft with dacron fill.
6.5" Earthquake Focuse6.5 2 way speakers kickpods up front.
HU: JVC KD-G801
4 channel amp:
Pioneer GM-4000F 140Watts rms amp bridge into 2 channels at 70 watts rms
USAcoustics USC2100 300w rms (bridged)
12" JBL GT4-12 sealed box 1qft with dacron fill.
6.5" Earthquake Focuse6.5 2 way speakers kickpods up front.
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
