I meant tweaking, sorry bad typin !
Edited by Boosted5cyl, 15 March 2006 - 03:58 PM.
0
Hood Latch Twaeking
Started by Boosted5cyl, Mar 15 2006 03:31 PM
-
This topic is locked
5 replies to this topic
#1
Boosted5cyl
-
- Members
-
- 1,904 posts
Level 3 Member
- Interests:Volvos, Surf, Snowboarding, and Buccaneer football!
- Location:Middletown, VA.
- Crew:NEC
Posted 15 March 2006 - 03:31 PM
Standing in front looking back, if the left side is too tight and the D-side doesn't release still and POP up evenly, which do I lower or raise with the 2 bolts on each catch ?
I meant tweaking, sorry bad typin !
I meant tweaking, sorry bad typin !
98 V70 R - AWD SOLD & currently dead sadly...
019 - Black on black leather/suede
X-drilled Zimms-Akebono ACTs-EST intake-IPDstrut brace-SAMCOs 4 intercooler-VDO psi gauge, Custom 3in DP & exhaust w/dual Borla XR1-s
RICA tuned~Super60~AEM Uego~TMEs and IPD sway install pending ~
019 - Black on black leather/suede
X-drilled Zimms-Akebono ACTs-EST intake-IPDstrut brace-SAMCOs 4 intercooler-VDO psi gauge, Custom 3in DP & exhaust w/dual Borla XR1-s
RICA tuned~Super60~AEM Uego~TMEs and IPD sway install pending ~
#2
Boosted5cyl
-
- Members
-
- 1,904 posts
Level 3 Member
- Interests:Volvos, Surf, Snowboarding, and Buccaneer football!
- Location:Middletown, VA.
- Crew:NEC
Posted 15 March 2006 - 07:40 PM
bump... lil help, anyone.....
98 V70 R - AWD SOLD & currently dead sadly...
019 - Black on black leather/suede
X-drilled Zimms-Akebono ACTs-EST intake-IPDstrut brace-SAMCOs 4 intercooler-VDO psi gauge, Custom 3in DP & exhaust w/dual Borla XR1-s
RICA tuned~Super60~AEM Uego~TMEs and IPD sway install pending ~
019 - Black on black leather/suede
X-drilled Zimms-Akebono ACTs-EST intake-IPDstrut brace-SAMCOs 4 intercooler-VDO psi gauge, Custom 3in DP & exhaust w/dual Borla XR1-s
RICA tuned~Super60~AEM Uego~TMEs and IPD sway install pending ~
#3
Patrick.
-
- Lifetime Supporter
-
- 5,707 posts
Level 5 Member
- Gender:Male
- Location:RI
- Crew:NEC
Posted 15 March 2006 - 07:49 PM
I would guess you should lower your driver's side latch just slightly---
maybe reposition both of them, make sure they're both equal by measuring
maybe reposition both of them, make sure they're both equal by measuring
#4
Boosted5cyl
-
- Members
-
- 1,904 posts
Level 3 Member
- Interests:Volvos, Surf, Snowboarding, and Buccaneer football!
- Location:Middletown, VA.
- Crew:NEC
Posted 15 March 2006 - 08:35 PM
cool cool man, Im headed back to the drawing board tonight so I"ll let you know how it goesm thanks man, peace
98 V70 R - AWD SOLD & currently dead sadly...
019 - Black on black leather/suede
X-drilled Zimms-Akebono ACTs-EST intake-IPDstrut brace-SAMCOs 4 intercooler-VDO psi gauge, Custom 3in DP & exhaust w/dual Borla XR1-s
RICA tuned~Super60~AEM Uego~TMEs and IPD sway install pending ~
019 - Black on black leather/suede
X-drilled Zimms-Akebono ACTs-EST intake-IPDstrut brace-SAMCOs 4 intercooler-VDO psi gauge, Custom 3in DP & exhaust w/dual Borla XR1-s
RICA tuned~Super60~AEM Uego~TMEs and IPD sway install pending ~
#5
HPTDoh
-
- Validating
-
- 5,969 posts
Level 5 Member
- Gender:Not Telling
- Crew:___
Posted 15 March 2006 - 08:44 PM
If you look at the hole where the bolt goes through, it can be adjusted a lot.. I had to readjust mine a few times.. You can pretty much just eyeball it and make sure the bolt is in the middle of the mounting point. I wish I had a pic, cause it'd explain it a lot better than me!
#6
Boosted5cyl
-
- Members
-
- 1,904 posts
Level 3 Member
- Interests:Volvos, Surf, Snowboarding, and Buccaneer football!
- Location:Middletown, VA.
- Crew:NEC
Posted 15 March 2006 - 09:10 PM
ok is it the 2 bolts on each latch or the small allen/torx screw ? I think it's the 2 bolts/ side right, I'll figure it out, thanks Pikey T .
98 V70 R - AWD SOLD & currently dead sadly...
019 - Black on black leather/suede
X-drilled Zimms-Akebono ACTs-EST intake-IPDstrut brace-SAMCOs 4 intercooler-VDO psi gauge, Custom 3in DP & exhaust w/dual Borla XR1-s
RICA tuned~Super60~AEM Uego~TMEs and IPD sway install pending ~
019 - Black on black leather/suede
X-drilled Zimms-Akebono ACTs-EST intake-IPDstrut brace-SAMCOs 4 intercooler-VDO psi gauge, Custom 3in DP & exhaust w/dual Borla XR1-s
RICA tuned~Super60~AEM Uego~TMEs and IPD sway install pending ~
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users
