lookforjoe

TME Spring Set http://i27.photobucket.com/albums/c190/huseinholland/CarMods/V70XCloweredTMEsprings0007.jpg http://i27.photobucket.com/albums/c190/huseinholland/CarMods/V70XCloweredTMEsprings0009.jpg http://i27.photobucket.com/albums/c190/huseinholland/CarMods/V70XCloweredTMEsprings0008.jpg compared to stock XC

Forgot to add the remove dust sheilds, except these important bits... mark & cut axle ears fit brackets install 996 calipers/rotors/pads - cal L 996-351-425 cal R 996-351-426 bolt 999-073-402-01 x4 Rotors 3045223 Pads 996-352-949-03 Did your C70 finally show up?

Bought some HTS-2000 rod to braise my intercooler plumbing - got rid of all the intermediate couplings in the system... now there's one @ the compressor, two for the intercooler, and two for the throttle/intake elbow used the end from the stock piping for the compressor outlet connection... nowhere near as neat as BlackT5's welds, but it's strong. cleaned up the outside.. Painted black.... Redid inlet elbow, 2.75" to 2.25" for intercooler plumbing braised ports for IAC & BOV redid intake pipe, no more odd Volvo grommet, used firewall grommet instead braised aluminum port for BOV The paint is original factory, except bumpers which I rattle-canned :rolleyes:

From Carlisle... 282WHP 317WTq - too lean to run over 17.5psi - Once I get TurboTuner (should be out in a couple of weeks!) & install my 625cc injectors, I'm assuming I will be able to run the 22-24psi that I want, and make some nice numbers! Youtube Vid

Thanks!

Where are we at with this?

Meh. I just went to TB, SS & V70R :rolleyes:

Can't find it either...

This one in announcements doesn't work either - it's odd that it coincided with the interface change, but that must be just coincidence?

eeerrrrrr..... clicking on the subscription link in the "for sale" section (the only one I could find) doesn't do anything except dump you back to the main forum page... :blink:

Ahhh... I didn't realize my membership had expired... that must be it.

That's where I'd expect it to be, but I only have reply & multiquote, with "+" "-" "0" (?) above it

Where?

I like the overall look - but I want my EDIT back - I always have typo's, and since the Photobucket tags don't always copy properly, I often get the wrong pic - which at least with edit function I could fix immediately :rolleyes:

Nice! Volvo's AWD system ?, or the Evolve mod mentioned (by can't remember who... not sure it's actually a reality )

Dyno day @ EPL was cancelled due to lack of attendance I think I'm gonna pull the DS so I can dyno @ Carlisle Thanks, Will! :)

http://i27.photobucket.com/albums/c190/huseinholland/CarMods/Shifter%20Mods/XCM66shortShifter0005.jpg just need to add the groove for early ('00) shifter - spaceball shift uses a totally different attachment method Ball Stud for earlier (-'00) cables is larger OD - I had to cut the ball off the old shifter, drill it out & braise it onto the tailgate stud I am using...

Believe me when I tell you I have absolutely no desire to part with it! Finding any other wagon that pulls the way this does, handles the way it does, just ain't happenin'. The bottom line is I love my wife, and want to stay married! Logic & rational thought do not enter into the equation! We'll see what happens after Carlisle...

I don't know the math/volume/flow, whatever - you would think it would cause a pressure drop, & delayed response and maybe it does on low-flow turbos- but, it feels very responsive with the 19T & 20g setup. I don't know if running 3" all the way from the turbo would make any difference - the outlet of these turbos is still only 2", so if there's gonna be a drop, it will occur in any event.

No, that's black leather :rolleyes:

Thanks Guys! Couldn't do it without all the resources & input from VS, really. I shortened my shifter today, copying lloydobler

20g Install... 3" Down Pipe, 3" back, Intake temp probe & gauge Volvo Greens fabricate custom pipes http://i27.photobucket.com/albums/c190/huseinholland/CarMods/XCV70turbo20gLines0001.jpg adjust clocking, wastegate actuator 19T, 20g comparison coolant return pipe mod, lengthen, replace banjo union w/larger fitting http://i27.photobucket.com/albums/c190/huseinholland/CarMods/XCV7020G0013.jpg on the manifold http://i27.photobucket.com/albums/c190/huseinholland/CarMods/XCV7020G0016.jpg pipes fitted http://i27.photobucket.com/albums/c190/huseinholland/CarMods/XCV7020G0018.jpg down pipe intake probe http://i27.photobucket.com/albums/c190/huseinholland/cars%20cats%20houses/XCV70springclean0002.jpg http://i27.photobucket.com/albums/c190/huseinholland/cars%20cats%20houses/XCV70springclean0018.jpg

Ported Intake, 3" TB

Water Injection... aquamist fittings for solenoid home depot 1/4" fittings for Shurflo pump connections fabricate harness aquamist 7mm nozzle aquamist reservoir fitting, aquamist 6mm line 160psi Shurflo pump in frame rail - 1/2" to 1/4" fittings injector solenoid activated indicator Wiring Diagragm