the ünderstüdy

UPDATE!!!!!! Silicone came in today, and had the IC piping welded...... Love it or hate it, my buddy Bailey and I tiger striped the ISH outta the IC piping, it looks really raw and awesome i love it. Hawtness holy HUGE front mount batman my buddy blake on the left with his english bulldog 'Moki' and the stud Bailey, master mind behind the IC striping T clamps, only way to go ANd the Tiger Striping, its super dead sexy if u ask me bailey or joseph. The hawt side and the cold side u can kinda see. OK well after, 3 different trys to fit the IC w/ the 90* coupilers, we got it in, and having to run the dye grinder at 1230 at night, it was a fun night, just messing around on the car. more updates saturday and sunday guys, thanksa again Brian

Thanks alot bert. well be working on it this weekend if u wanna stop by. alot of the people who have stopped by have suggest great ideas for the car, and weve actually used quite a few of umm. as for those parts, thats much appreciated BK, thanks a bunch. Bk

+1837362484984366438384.69

:ph34r:

joe dont worry about that man, ive got it covered hahaha :ph34r:

Ok so &@^% and i did ALOT more work this weekend on the 242. things went very very smoothly. srt4 550cc injectors. no drilling needed. They plugg right in Love these things so far, now only if i could drive the car. Almost done with the Cold side of the motor. fuel rail.... The remote oil filter kit from jeggs. mounts so clean, and makes oil changes a breeze so i was happy with that where the filter use to be... and where it is now. (no its not too close to the down pipe guyshahaha) Mallory 6-AL and MS mounted up. mallory is upside down for a reason, the rev limitor switch is on the side facing the rear of the car so for easy access to change, it had to be mounted this way. And my favorite. the IC stuff came out AWESOME!!!!! i am very very happy with the way its coming, its going to be welded tomorrow and everything. #&@^ and i have been amped on the IC project part since the beginning, and both of us think that thats going to be the high light of this car. Cuttin the piping to fit. COldside, goes right under the battery mount platform. then bends around the wheel well where it hits into a 45* ilicone elbow, then 90's up into a hump coupler then onto the throttlebody. And the hott side. we had to use the old turbo and clock it to the position that the new turbo is going to be at.(k24 is with ben having oilfeed adapters made) and with an intake, Darn this engine bay is gonna be sexors. Then i had to cut out a bit of the reenforcement that the bumper bolts to so i can get some more flow on the IC. turned out really well. let me know what u think guys. and the pride and joy of the project. the IC!!!!!!!!

someone buy this car already, it shoulda been sold by now

PIMP-a-Licious

jake ill call u tomorrow. i love u

$8k takes it off ur hands buddy

hahaha, i had another pic up but when i posted it was so obvious what my card number was i had to take it down. Why is it that everytime i post a picture i post something that other people shouldnt know except me???hahaha oh well.

The Jegs Fairy came again today. just need the XD-16 and my laptop from CJ and ive got everything i need to complete the build. The Mallory 6-AL single mount filter women of questionable morals.

< went to the bank today

take whatever money u make from selling ur car, and take a few english classes. ud get ur moneys worth jake trust me

jake my 240 has less miles then ur 70 why would i give u my car, when its done, AND $8,000 for a car that isnt worth that?????? sorry buddy, but maybe u should try my boyfriend zags, he might pay what u want

ill give ya $8k for it

carson might come by as well, we will see.

anytime man, come by this weekend, &^#% and i will be working on it most of the weekend so.....jsut give me a call man.

PM him. and no its not a custom map,

iPD ECU CF Rlip Rbumper

10-4 roger that ghost rider. i gotcha mike. Well $&^# and Gary from tbricks came over this morning and we did a bit of work on the car. figure out how the IC is going to be mounted and we modified the brackets that came with the IC. The IC was an Ebay purchase. cheap, EVO replacement IC. thing is BEEFY as hell. I love how it fits. pulled all the Kjet out, and now we are almost ready to start putting everything back together. here are some pics from this morning: Pulling the KJet SUper clean wiring harness(sarcasm) How the IC WILL look now. it hung down to low before, this way ill have clearance, and ill still get some flow from the top. the brackets passenger side IC piping is gonna have a 90 silicone coming off of the IC, then into the piping. more nasty IC pics It looks a bit blocked right now, but there should be enough airflow right now, but once the custom front bumper is done then itll be flow'n very nicely. dont need to relocate the oil cooler either so that makes things alot easier as well the hot sde torn down even more COmments suggestion welcome, thanks guys, more pics to come in a few days as the project progresses Brian

NICE dude!!!! San pedro rules!!!! Im Slav so i have lots of family down in Pedro. hope u like it man.

;)

add jasons red wagen and uve got it.

:blink: