Jump to content
Volvospeed Forums

Ihatespeedbumps

OH Moderator
 View Profile  See their activity

  • Posts

    5,270

  • Joined

  • Last visited

  • Days Won

    42

 Content Type 

Everything posted by Ihatespeedbumps

  1. Ihatespeedbumps
    Pics or it didn't happen
  2. Ihatespeedbumps
    I would be in for some too, never bought in over the years...
  3. Ihatespeedbumps
    Sucks you took a hit on the Venetian but it looks like you have a plan to get it back in shape. Hopefully, that insurance money will help pay for some go fast parts
  4. Ihatespeedbumps
    Here goes Jim talking about his cars again when nobody asked. It's like you have internet forum turrets.
  5. Ihatespeedbumps
    Considering a turbo Sentra is now 32k (vomit) this is the unfortunate world in which we live. New cars are just outragesly expensive.
  6. Ihatespeedbumps
    My parents both drive identical V70's just like yours. Outstanding vehicles! Sorry to hear about the 850, but looks like it did it's job and life as an organ donor is going well too :)
  7. Ihatespeedbumps
    Yes, accelerator pedal removal required. If you have IAQS the fun factor increases x3. You made the right call with the C30 :)
  8. Ihatespeedbumps
    Great thread/build so far!!! The real burning question in my mind, have you had the distinct pleasure of changing the pollen filter yet?
  9. Ihatespeedbumps
    Make sure when checking your valve clearances that you are near 20C. There is an alteration made for different temps, it can be found in VIDA.
  10. Ihatespeedbumps
    Never seen it before, but I know who's car it is. Guy goes to school at Vandy lives in MA. I've talked to him a few times on SS.
  11. Ihatespeedbumps
    Keep in mind if you are interested in the same hitch I have it's not a universal square style hitch, it's Volvo proprietary and per VIDA it's the only hitch style available.
  12. Ihatespeedbumps
    I just paid our body guy $20 bucks to spray them on the side. He was happy to do it.
  13. Ihatespeedbumps
    Got the Snabb intercooler kit (standard model) installed yesterday. As I'm sure most of you have guessed, vast improvement over stock, especially with the warm temps we now have in TN. Fit and finish was really nice, not too bad of an install, though a few choice words were used at times. But it's silicone, who doesn't? Also got the PCV system knocked out while doing the IC. Surprisingly clean for 118K. The PO must have kept up with the oil changes pretty well. Once I wash the car I'll take some pics of the new IC. Also have to buy some 3M double sided tape and install the wiper delete plugs I've had sitting in my toolbox for 6 months.
  14. Ihatespeedbumps
    Trent, Got the inserts installed yesterday afternoon and I'm loving them. Bumps feel much smoother and since installing the track spec sway bars I had some uncertainty (for lack of a better word) in high speed cornering. All of that seems to be eliminated. Also, no detectable vibration added to the cabin. Great upgrade IMO for 68 bucks. It should be noted that I'm on stock LCA bushings that are in good shape, but original. My guess is the lack of "give" in your suspension is causing this.
  15. Ihatespeedbumps
    Engine has to be supported from the top and tilted towards the drivers side to get the M66 out. Don't have to do the tilt for autos.
  16. Ihatespeedbumps
    Update on the over boost situation. After setting the waste gate at 4psi cracking pressure I drove the car for a few days and was able to maintain a stable 15psi max with a new OEM TCV. Decided to turn the waste gate two more full rotations, drove gently for a few days and now the boost builds more quickly and still holds at 15. I intend to turn a few more times, do the same drive cycle and see what happens. For what it's worth I marked the initial position of the waste gate rod. So I'm trying to determine if the waste gate was out of adjustment or if the TCV had completely shit the bed. EDIT: Forgot to mention I had the IPD subframe inserts hit the mailbox this week, just need a free lift and a few minutes to install them. Will post results when they are installed.
  17. Ihatespeedbumps
    Not something you can order, but something you can have done easily. It just involves cutting out the resonator in the middle of the exhaust and welding in a straight pipe. If you still have the stock down pipe it gives the exhuast a much nicer sound, plus a little extra power to boot. Mine cost $6 and some change, but that's because I did it myself. I'm sure most exhuast shops would do this for under $100.
  18. Ihatespeedbumps
    I'm not familiar with this Steve-O guy? CT is a LONG way from Nashville I probably forgot to mention, I did install the Forge CBV while doing the clutch job, much easier that way. I've looked into the Forge WGA, but funds are limited at the moment.
  19. Ihatespeedbumps
    Yea, I was thinking the DP was partially to blame. I turned the waste gate down to 4psi cracking pressure and I've been inching it up since with the new TCV. No more over boost, but in most gears I'm getting about 12psi. Of course I'd rather have 12 than 30! The self tune looks interesting, but I would have l lots of research to do before jumping into that.
  20. Ihatespeedbumps
    I think in the VIDA instructions they have you just drop the subframe partially then you can remove the transmission. I can get a subframe out in less than 45 minutes, so it makes sense to just get it out of the way. Here is a pic of the trans going back in
  21. Ihatespeedbumps
    Not sure if it's THE rarest, but very few around. Next step is going to be trying leatherique to see what it can do. I would love to go this route. Unfortuantely I don't have the time or money to get this done. Maybe in the future... I've been offered some lowering springs, and I'll probably kick myself later, but I don't think I'm going to lower it. Being that it's a daily I just don't want to contend with the tire wear issues. No tune either, that's why the overboost problem is a bit of a head scratcher. Think I've got it under control though. I am pleased with it still, even though I do cuss it every now and then.
  22. Ihatespeedbumps
    haha, you wouldn't be the first to make that comment!
  23. Ihatespeedbumps
    Since it's been a few months I thought I'd share some updates. Turns out, this car was poorly cared for. I'm pretty sure the previous owner knew what was coming and decided to trade. Also, I sold the SR back in December so my insurance is back to manageable. Since purchase 7 months ago I've done the following: OEM clutch w/ single mass flywheel from VIVA New intermediate lever and shift cables due to broken cables when trans was removed Replaced angle gear collar and installed used angle gear OEM plugs and coils Fuel pressure sensor Snabb intake pipe Forge CBV 18" OEM Pegs w/ new tires Kenwood DNX 419, Sirius and back up camera IPD Track Spec swaybars DIY strut bar conversion OBX down pipe Resonator delete OEM TCV Reverse light switch What I've got left to do: Snabb FMIC kit Slightly used shocks this summer IPD subframe inserts (back ordered) I'm still battling some over boost issues and the front shocks are pouring oil. Not pictured are the OEM load bars that are sitting in my garage. They will share dual duty between my car and Mom's 06 V70 2.5T. I still smile every day I get to drive this thing. Plans for the future are to upgrade further and in the next few years buy an auto R for daily use and put the FG in the garage. Currently at 117k and wanting to keep the miles relatively low. Will post pics once the FMIC is installed. Anyways, on to the pics. As mentioned previously the PO let his dogs and children run amuck. Here are the damage photos I know I've never posted a picture of the trailer hitch, but it's quite an odd looking creature.
  24. Ihatespeedbumps
    Love to see the full sport kit! Care to indulge us on your plans?
  25. Ihatespeedbumps
    Top Gear season 19 episode 5, a flash green VR drives past them as Richard and Jeremy are looking for their car. Sorry, don't have the exact time.
×
×
  • Create New...