turbor850 Posted April 26, 2009 Report Share Posted April 26, 2009 Okay, so here are the two cars for a future "race" . . .1995 850 T5 5 speed - 2.3L - ?Chip? - 3'' Turbo Back Exhaust - 16T? - R Manifold - MBC - think thats it ? (HP - 290-300 ?) - weight - 3280lbs2008 Ford Bullitt - 4.6L - Stock (HP - 315) - weight - 3350 lbsWho wins ? Not from a stop, since we know the Mustang would win, but from a roll . . . Link to comment Share on other sites More sharing options...
Young Burnsy Posted April 26, 2009 Report Share Posted April 26, 2009 From what speed?I think its going to come down to gear ratios. Link to comment Share on other sites More sharing options...
TBM Posted April 26, 2009 Report Share Posted April 26, 2009 What kind of a tune does the 850 have? And a roll from what speed?Oh and what does each driver weigh? :lol: Link to comment Share on other sites More sharing options...
flyfishing3 Posted April 26, 2009 Report Share Posted April 26, 2009 i'm gonna go with the 850.i've run against your bullit chris. Link to comment Share on other sites More sharing options...
turbor850 Posted April 26, 2009 Author Report Share Posted April 26, 2009 i'm gonna go with the 850.i've run against your bullit chris. oh yeah !but you running against the bullitt meaning me from a stand still and you starting from 70 and after i start to catch up that everyone hits the gas and I play catch up lets see, drivers - 850 - 200 ? Bullitt - 190From what speed?I think its going to come down to gear ratios.850 - M56H gearsBullitt - 3.73 (stock gears) Link to comment Share on other sites More sharing options...
Mesoam Posted April 26, 2009 Report Share Posted April 26, 2009 lets to a 3 way 30 roll? Link to comment Share on other sites More sharing options...
ErikS Posted April 26, 2009 Report Share Posted April 26, 2009 lets do a 3 way 30 roll?Hhhmn ... sounds like sushi, sex, and cars. Link to comment Share on other sites More sharing options...
turbor850 Posted April 26, 2009 Author Report Share Posted April 26, 2009 lets to a 3 way 30 roll?OHHH, SOUNDS LIKE FUN Link to comment Share on other sites More sharing options...
JCviggen Posted April 26, 2009 Report Share Posted April 26, 2009 I'm going to put my bet on the Ford. Link to comment Share on other sites More sharing options...
B Mac Posted April 26, 2009 Report Share Posted April 26, 2009 850 specs = 210lb driver, 3" turbo back with one muffler ( i'll unbolt it for the extra 2hp ), straight flange 15g, 19t wg actuator, 14psi mbc, '97 UK 5spd ecu, R manifoldI'm thinking a 30 roll and a 60 roll.....might be close?? The 850's pretty quick on the highway lately. Last time we did a pull Chris raped me w/o vaseline :lol: Link to comment Share on other sites More sharing options...
Young Burnsy Posted April 26, 2009 Report Share Posted April 26, 2009 Last time we did a pull Chris raped me w/o vaseline Sounds like you enjoyed it a bit too much. :lol: Link to comment Share on other sites More sharing options...
JCviggen Posted April 26, 2009 Report Share Posted April 26, 2009 OK if it's a 5-spd I'll change my prediction ;) Link to comment Share on other sites More sharing options...
B Mac Posted April 27, 2009 Report Share Posted April 27, 2009 :(:(:(:(:(Sorry for the letdown guys...that stang is effin quick in the top end. We did a bunch of pulls (Chris will post the vids) at various speeds (30,40,50,65) and played with what gears we were both in. We also did the "driver swap" which was fun . I must say this though....I killed Chris from a 50 roll in 5th gear :lol::lol:.....but he pulled away in all of the others. We're thinking that once I get some n/a cams in there we should be dead nuts on the highway as he only had a length or two from 50-120 .We went to home depot to make a boost leak tester before all of this...found a HUGE tear in my tb hose (which I had replaced not long ago with a good one ) and adjusted a few things here and there.Thanks for finding my boost leak Chris :wub: Link to comment Share on other sites More sharing options...
Fudge_Brownie Posted April 27, 2009 Report Share Posted April 27, 2009 We went to home depot to make a boost leak tester before all of this...found a HUGE tear in my tb hose (which I had replaced not long ago with a good one ) and adjusted a few things here and there.Thanks for finding my boost leak Chris I thought you did a fund raiser for silicone hoses? :huh: Link to comment Share on other sites More sharing options...
B Mac Posted April 27, 2009 Report Share Posted April 27, 2009 I thought you did a fund raiser for silicone hoses? I went and bought a stock replacement hose....what's your point? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.