Jump to content
Volvospeed Forums

New Dash -Dolby Pro Baby!


HeavyIron

Recommended Posts

  • Replies 45
  • Created
  • Last Reply

I bet if you were careful about it you could retro the speaker on to the 850 dash as well....Just thinking about it if you cut away the material from the back side of the dash up to the vinyl you could then pierce the vinyl and wrap it to the back side and the speak grill would cover up any other imperfections...

Link to comment
Share on other sites

Speaking of which, do you know which connectors does the center speaker goes to on the SC-901?

I would like to rig up some sort of center channel, but don't know where the wires would go into the SC-901. I know its not connected to the stock outboard amp nor the Dolby unit. But which connector and pin does it go to?

Link to comment
Share on other sites

Speaking of which, do you know which connectors does the center speaker goes to on the SC-901?

I would like to rig up some sort of center channel, but don't know where the wires would go into the SC-901. I know its not connected to the stock outboard amp nor the Dolby unit. But which connector and pin does it go to?

My guess is that it goes to the 12-pin (?) green connector on the back of the radio.

Link to comment
Share on other sites

My guess is that it goes to the 12-pin (?) green connector on the back of the radio.

It does, and it's 4 pin - you'll need to source an original cable I think. I couldn't find a matching connector. BTW, does anyone know what the other two brown and black wires do? Mine were cut when I bought it.

EDIT It's a 5 pin cable, mine has 4 wires connected, pin 2 is N/C

I bet if you were careful about it you could retro the speaker on to the 850 dash as well....Just thinking about it if you cut away the material from the back side of the dash up to the vinyl you could then pierce the vinyl and wrap it to the back side and the speak grill would cover up any other imperfections...

Has anyone done this? I have a 3990 dash and apparently center speaker dash tops don't come in this color. So I go two-tone ( <_< ) or hack up another dash...

Link to comment
Share on other sites

It does, and it's 4 pin - you'll need to source an original cable I think. I couldn't find a matching connector. BTW, does anyone know what the other two brown and black wires do? Mine were cut when I bought it.

Has anyone done this? I have a 3990 dash and apparently center speaker dash tops don't come in this color. So I go two-tone ( <_< ) or hack up another dash...

The Dolby dash I bought is a spot on match for the tan dash that came in my car originally, which was "two tone". I have the light tan interior. It looks totally factory, despite being "two tone" as you put it. Finding one is a whole other story!

Link to comment
Share on other sites

I'm English by birth, so "two-tone" has terrible implications of dodgy white-boy 80's Ska played by acne-ridden art students in pork pie hats. No offense intended! I know of a light tan dash I can pick up for a decent price if I'm prepared to drive 3 hours to get it...the temptation is enormous.My interior is darker, couple of shades above "Oak", but not the creamy light tan.

Link to comment
Share on other sites

It does, and it's 4 pin - you'll need to source an original cable I think. I couldn't find a matching connector. BTW, does anyone know what the other two brown and black wires do? Mine were cut when I bought it.

Has anyone done this? I have a 3990 dash and apparently center speaker dash tops don't come in this color. So I go two-tone ( <_< ) or hack up another dash...

No...I have a spare dash pad but I dont like the way the center speaker looks.

Link to comment
Share on other sites

Another option for people that don't want to swap dashes, but still have the center speaker, is a DIN center channel.

http://www.crutchfield.com/p_500SBS05DC/Alpine-SBS-05DC.html?tp=108

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.


×
×
  • Create New...