marco bolduc Posted January 22, 2010 Report Share Posted January 22, 2010 Hi guys, I want to know want it the stock PSI a 16t wastegate should be tuned? and at how much PSI you guys have tuned it? Link to comment Share on other sites More sharing options...
Rsterns Posted January 22, 2010 Report Share Posted January 22, 2010 Hi guys, I want to know want it the stock PSI a 16t wastegate should be tuned? and at how much PSI you guys have tuned it? IPD put out a nice little video that details how to set it up as well as explaining turbos in general... Link to comment Share on other sites More sharing options...
marco bolduc Posted January 22, 2010 Author Report Share Posted January 22, 2010 IPD put out a nice little video that details how to set it up as well as explaining turbos in general... yeah I know, but that is for a stock Setup, I'm looking for the one who have set their wastegate to a different level than stock! Link to comment Share on other sites More sharing options...
Ipd Posted January 22, 2010 Report Share Posted January 22, 2010 LPT = 3.5 psi HPT = 5 psi You can go a bit more but these are safe figures to start from so you don't run into boost overshoot. Link to comment Share on other sites More sharing options...
marco bolduc Posted January 22, 2010 Author Report Share Posted January 22, 2010 LPT = 3.5 psi HPT = 5 psi You can go a bit more but these are safe figures to start from so you don't run into boost overshoot. good! I will first check what is the current setting of my wastegate because I'm currently running 20psi on the turbo so maybe the wastegate has been already set up! Link to comment Share on other sites More sharing options...
UnknownSoldier Posted January 22, 2010 Report Share Posted January 22, 2010 Have a play with it mate, i think the original on mine was about 4.3psi but upped it to like 6psi, s60 but. Trial and error works fine, as long as you are not getting errors due to overboosting and such. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.