Prezman26 Posted May 26, 2010 Report Share Posted May 26, 2010 You need a turbo Mike.... ehhhh, im happy Link to comment Share on other sites More sharing options...
firepuma Posted May 26, 2010 Report Share Posted May 26, 2010 would that be just a direct bolt up? and does the manifold have more flow than the turbo manifold? pretty much what i want to know is if swapping the tb and manifold would be worth it. i would definitely love the bigger tb hose, but would the other stuff work with my car very well? If this is for that laser blue in your pic, it has no bearing on your etm i.e. will not work. Link to comment Share on other sites More sharing options...
Prezman26 Posted May 26, 2010 Report Share Posted May 26, 2010 let me know when these are ready to be ordered Link to comment Share on other sites More sharing options...
Bah Posted May 27, 2010 Report Share Posted May 27, 2010 ehhhh, im happy Lol uhm what he means is you can't use this if your an N/A The deal is this: 850 N/A's have a larger throttle body w/ larger plate then 850 Turbos. The 850 N/A manifold will bolt up to the 850 Turbo intake manfold. The 850 Turbo Intake manifold needs to be ported in this section in order to make any potential gains out of this, or for the consumer to pick up an N/A manifold. This is all talking 850's Deal with 850 N/A TB's is the throttle plate has a huge plastic restrictor on it. No good for anyone except soccer moms with lead feet So you take the 960 Throttle plate(960 Throttle bodys dont have the restrictor and are the same size as the 850N/A, but the TPS sensor is placed opposite or something i believe...) , and replace the 850 N/A throttle plate with the 960 throttle plate. Now what stylin is selling is the throttle body hose for the STOCK INTERCOOLER piping. No intercooler, no use. Atleast i don't see a use =p Very cool. Any chance you guys would sell it for a RIP kit setup as well? if everything pans through with this ofcourse Link to comment Share on other sites More sharing options...
bum2kev Posted May 27, 2010 Report Share Posted May 27, 2010 here was the previous GB.... http://volvospeed.com/vs_forum/index.php/topic/111892-960tb-elbow-hose-group-buy/ Link to comment Share on other sites More sharing options...
Prezman26 Posted May 27, 2010 Report Share Posted May 27, 2010 i'm telling you guys there is a fair market for custom stuff like this for the NA's. If only people would start making stuff. Link to comment Share on other sites More sharing options...
bum2kev Posted May 27, 2010 Report Share Posted May 27, 2010 i'm telling you guys there is a fair market for custom stuff like this for the NA's. If only people would start making stuff. what are you talking about?? you already have an na throttle body. just get a standard 3" silicon bend for your car for 3$. you dont need a 100$ custom piece. Link to comment Share on other sites More sharing options...
Aequitas_Veritas Posted May 27, 2010 Report Share Posted May 27, 2010 I wont be participating in this GB because there seems to be a better offer on the table. I should just warn stylin that they might not want to make these cause you might/will be undercut soon. Just saying. Link to comment Share on other sites More sharing options...
Dave 54 Posted May 27, 2010 Report Share Posted May 27, 2010 NVMD i'm out. Link to comment Share on other sites More sharing options...
the commissar! Posted May 27, 2010 Report Share Posted May 27, 2010 There are TWO different hoses that need to be made...the complex one for folks running the standard setup and one that is just an elongated reducer elbow for people running a RIP kit like me...If you would do a RIP version I'd be in for one as I'm sure several other people. I have done the TB modification and have a cobbled together connection but would love to get a one piece solution... Link to comment Share on other sites More sharing options...
StylinMotors Posted May 27, 2010 Author Report Share Posted May 27, 2010 Yes this would be a one piece solution like the current TB hoses we offer for the stock TB. Only differences maybe, Flourocarbon liner, and be able to fit N/A Throtle Body. We could also do one with out the IAC spigot hose. Link to comment Share on other sites More sharing options...
StylinMotors Posted May 28, 2010 Author Report Share Posted May 28, 2010 Question? What are people doing now for this mod? Link to comment Share on other sites More sharing options...
bum2kev Posted May 28, 2010 Report Share Posted May 28, 2010 Question? What are people doing now for this mod? here was the previous GB.... http://volvospeed.com/vs_forum/index.php/topic/111892-960tb-elbow-hose-group-buy/ http://volvospeed.com/vs_forum/index.php/topic/113534-1998-v70-xc-from-the-beginning/page__view__findpost__p__1531134 Link to comment Share on other sites More sharing options...
StylinMotors Posted May 28, 2010 Author Report Share Posted May 28, 2010 Seems like a lot of places for leaks to develop. Link to comment Share on other sites More sharing options...
bum2kev Posted May 28, 2010 Report Share Posted May 28, 2010 Seems like a lot of places for leaks to develop. hes running 25psi with no leaks but then again we dont have a solution so we macgyver shit. here is mine for the rip kit routing. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.