Jump to content
Volvospeed Forums

98 C70 Coupe Hpt-M - Usd 8,000.00


Recommended Posts

See additional photos in the VS showroom: http:/volvospeed.com/vs_forum/topic/166949-c70-photos-td05h-content/ The car has 96,000 miles and is a factory manual. Was a CA car, then an OR car, so no signs of salt or rust anywhere. Garage kept by me for the last years. Previous owner claimed he kept it in a garage as well. List of mods: RZ Design TD05H-16G turbo kit (I only ever produced two of these) Custom all aluminum intake pipe with integrated MAF sensor TiAl BOV RZ Design drop in intercooler (manufactured by Extreme Turbo Systems in WA, the same guys who build the 1000+ whp GTR turbo kits) 550cc Bosch EV14 injectors Custom 304 stainless downpipe with v-band connection to turbo ARD/RZ Design custom tune Full innovate datalogging and real-time monitoring setup with wireless interface to any iOS device. Monitors MAF voltage, injector duty cycle, EGT, wideband, boost, and all parameters available through OBDII. Koni STR.T struts and shocks Kilen sport springs All torque rod bushings replaced with Powerflex bushings just a few days ago RZ Design Bi-Xenon projectors currently installed, but comes with brand new jewel headlights still in original Volvo boxes. Almost every maintenance i

View the full article

Link to comment
Share on other sites

SOLD

The car has 98,000 miles and is a factory manual. Was a CA car, then an OR car, so no signs of salt or rust anywhere. Garage kept by me for the last 3 years. Previous owner claimed he kept it in a garage as well.

Almost every maintenance item you can imagine has been replace with genuine Volvo parts within the last 20,000 miles. Timing belt and all pulleys, PCV, stage 0 items, etc...

Run with either Motul or Redline oil since I got it at 76,000 miles, and genuine Volvo gearbox oil in the transmission.

List of mods:

RZ Design TD05H-16G turbo kit (I only ever produced two of these)

Custom all aluminum 3" intake pipe with integrated MAF sensor

TiAl Q BOV

RZ Design drop in intercooler (manufactured by Extreme Turbo Systems in WA, the same guys who build the 1000+ whp GTR turbo kits)

550cc Bosch EV14 injectors

Custom 3" 304 stainless downpipe with v-band connection to turbo

ARD/RZ Design custom tune

Full innovate datalogging and real-time monitoring setup with wireless interface to any iOS device. Monitors MAF voltage, injector duty cycle, EGT, wideband, boost, and all parameters available through OBDII.

Koni STR.T struts and shocks

Kilen sport springs

All 4 torque rod bushings replaced with Powerflex bushings just a few days ago

RZ Design Bi-Xenon projectors currently installed, but comes with brand new jewel headlights still in original Volvo boxes.

10369058_10100872022133677_4622675032453

10386930_10100872023041857_8217531458566

1497867_10100872022882177_46283738137047

10380120_10100872022942057_7594530617057

Link to comment
Share on other sites

I'll consider it Chuck!

I closed down RZ Design in January because my new business needed all my attention. I still have a few of the billet projector shrouds sitting around, but everything else is sold out.

Link to comment
Share on other sites

  • 2 months later...

The car has 96,000 miles and is a factory manual. Was a CA car, then an OR car, so no signs of salt or rust anywhere. Garage kept by me for the last 3 years. Previous owner claimed he kept it in a garage as well.

Almost every maintenance item you can imagine has been replace with genuine Volvo parts within the last 20,000 miles. Timing belt and all pulleys, PCV, stage 0 items, etc...

Hello there, Stunning vehicle. :wub:

My name is Joseph. I've been looking for a a clean low mileage S/C/70 with a manual gearbox and yours is Gorgeous!

If you would like to talk further i'm quite interested in this vehicle.

Please text my phone at (586)-372-5534.

THANKS! :D

Link to comment
Share on other sites

  • 4 weeks later...

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...