Shredder1568908593 Posted April 26, 2016 Report Share Posted April 26, 2016 So I recently decided to fiddle around with my headlight adjustment after having trouble seeing at night. I was successful and am now close to the point where my headlights form a straight line. That being said, for some reason the adjuster screws (with white knobs) have VERY different amounts of thread exposed on left headlight vs right headlight... The left headlight is showing half as much thread as the left. Anyone have an explanation for that or similar experiences? Link to comment Share on other sites More sharing options...
Phixion Posted April 27, 2016 Report Share Posted April 27, 2016 I never measured mine when I had adjusted them once, but the only thing I can think of is since they would come from the factory at different levels due to the light closest to oncoming traffic would be set different from the opposite side as to not blind oncoming cars. Link to comment Share on other sites More sharing options...
Shredder1568908593 Posted April 28, 2016 Author Report Share Posted April 28, 2016 1 hour ago, Phixion said: I never measured mine when I had adjusted them once, but the only thing I can think of is since they would come from the factory at different levels due to the light closest to oncoming traffic would be set different from the opposite side as to not blind oncoming cars. Yeah thats what I was thinking, just seemed WAY off. I have them level now and haven't had anyone flash their highbeams at me yet Link to comment Share on other sites More sharing options...
Phixion Posted April 28, 2016 Report Share Posted April 28, 2016 That's really all that matters. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.