Slater Posted June 4, 2005 Report Share Posted June 4, 2005 Oh, I'll wait. I'm in no hurry. I'll have to figure out what chip/ecu mod I will use as well.←It will be worth the wait too - I have some cool stuff coming... Link to comment Share on other sites More sharing options...
stevwong Posted June 4, 2005 Report Share Posted June 4, 2005 It will be worth the wait too - I have some cool stuff coming...←Are you going to have 3" down pipe for 16T angle outlet? Link to comment Share on other sites More sharing options...
Slater Posted June 4, 2005 Report Share Posted June 4, 2005 Are you going to have 3" down pipe for 16T angle outlet?←Eventually, but I will need a car to fit it. Doing the straight and conical flanges first. Link to comment Share on other sites More sharing options...
Fake Name Posted June 9, 2005 Report Share Posted June 9, 2005 Got my links a few weeks ago, but have not had the time to install them yet. However, in the mail yesterday, comes another little shipment from Quickbricks- a set of lock washers, complete with very accurate instructions for installation. Apparently, one individual had a link adjustment back off. Not a huge deal.Here's my point: Slater spent time and resources to correct an issue that I never knew existed and probably would have never even had the same issue.I believe folks that give good service the first time are terrific. But when there is an issue, regardless of how small, and that person anticipates the needs of customers and corrects any question of problem, that is a person and company that EARNS MY BUSINESS and my RESPECT.Thanks, Slaterfn Link to comment Share on other sites More sharing options...
Patrick. Posted June 9, 2005 Report Share Posted June 9, 2005 I believe folks that give good service the first time are terrific. But when there is an issue, regardless of how small, and that person anticipates the needs of customers and corrects any question of problem, that is a person and company that EARNS MY BUSINESS and my RESPECT.Thanks, Slaterfn←couldn't agree more, Slater is truly a stand-up guy :pizza: Link to comment Share on other sites More sharing options...
theunderlord Posted June 9, 2005 Author Report Share Posted June 9, 2005 Got my links a few weeks ago, but have not had the time to install them yet. However, in the mail yesterday, comes another little shipment from Quickbricks- a set of lock washers, complete with very accurate instructions for installation. Apparently, one individual had a link adjustment back off. Not a huge deal.Here's my point: Slater spent time and resources to correct an issue that I never knew existed and probably would have never even had the same issue.I believe folks that give good service the first time are terrific. But when there is an issue, regardless of how small, and that person anticipates the needs of customers and corrects any question of problem, that is a person and company that EARNS MY BUSINESS and my RESPECT.Thanks, Slaterfn←I got mine yesterday. If only some of our other "tuners" had Greg's level of commitment to his customers. Link to comment Share on other sites More sharing options...
PullMyFinger Posted June 9, 2005 Report Share Posted June 9, 2005 I got my lock washers yesterday too and I agree that Greg is a standup guy committed to quality and customer satisfaction.I actually had the same problem with my nuts coming loose on the gen1 version of the links. Simply because the bar is round and very hard to hold while tightening the nuts. I upgraded to the hex rod for mainly that reason also because they are longer which I prefer.Excellent stuff! Link to comment Share on other sites More sharing options...
budoboy Posted June 9, 2005 Report Share Posted June 9, 2005 Two questions: Do you need a front alignment with kind of mod? Will this put added stress on a stock sway bar to the point of damaging it?-BB :ph34r: Link to comment Share on other sites More sharing options...
PullMyFinger Posted June 9, 2005 Report Share Posted June 9, 2005 If you are only replacing the sway links, you do not need an alignment. And Quickbrick links (or any links for that matter) will not stress your sway bar to the point of damaging it. Not at all. Link to comment Share on other sites More sharing options...
GShyneDM Posted June 9, 2005 Report Share Posted June 9, 2005 I got mine yesterday. If only some of our other "tuners" had Greg's level of commitment to his customers.←Slater's name is Greg?! I thought it was Slater... oops... :o Link to comment Share on other sites More sharing options...
theunderlord Posted June 9, 2005 Author Report Share Posted June 9, 2005 Slater's name is Greg?! I thought it was Slater... oops... ←His name is Greg, but he goes by Slater. Link to comment Share on other sites More sharing options...
javadoc Posted June 9, 2005 Report Share Posted June 9, 2005 I'm late to the dance on these end links, but I don't think I've ever heard any kind of clunking from the front of my car aside from worn strut bushings a while back. What should I listen for? Is it subtle or loud popping/clunking? I'm probably too distracted by the turbo whistling, or the friggen CV joint thumping, to notice. :) Link to comment Share on other sites More sharing options...
gdizzle Posted June 9, 2005 Report Share Posted June 9, 2005 I got my lock washers yesterday too and I agree that Greg is a standup guy committed to quality and customer satisfaction.I actually had the same problem with my nuts coming loose on the gen1 version of the links. Simply because the bar is round and very hard to hold while tightening the nuts. I upgraded to the hex rod for mainly that reason also because they are longer which I prefer.Excellent stuff!←Ditto, got mine yesterday! TOP NOTCH SERVICE!!! Link to comment Share on other sites More sharing options...
850T Ltd. Ed. Posted June 9, 2005 Report Share Posted June 9, 2005 Ditto, got mine yesterday! TOP NOTCH SERVICE!!!←Ditto. I am going to order another set for my S70. Link to comment Share on other sites More sharing options...
freeskier8585 Posted June 9, 2005 Report Share Posted June 9, 2005 i just got mine yesterday, and my ipd sways should be here next week, im really excited for the endlinks + sways + kw / set up Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.