cRRRRazy Posted January 17, 2006 Report Share Posted January 17, 2006 hi to all,i need some help getting control arm bushings put in. I have HD bushings but i am not sure if they will work. when i took the control arm off the bolts that go through the bushings have bolt hole plates in them that allow the control arm (bushings) to be bolted to the subframe perpendicular to the bolt position throught the bushings.essentially the bolts arent bolts at all but "brackets" that allow it to bolt to subframe. i can get the bushings out (old ones), but if the bolt going through it is one piece then how am i supposed to fit the "bolt" (with the holding plates) through the little hole through the new bushings to put it back on?are the control arms and mounting style differ that much? for the same car here and in europe (where i got the bushings)i was told by volvo that the bushing and bolt are sold seperately so i should be able to get it to work i just don't see how?is this a lost cause?here is a pic of what i'm trying to sayany help is appreciated thanx! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.