ultra_runner Posted February 4, 2007 Report Share Posted February 4, 2007 OK - so I have read that you can keep the AC Condensor with the RK Intercooler kit. If so, can someone post some pics of the jig saw puzzle solution to make it fit? Kit came sans instructions.Here is a pic of the RK unit on the radiator unit without the AC condensor.Here is a picture of the custom IC that I am going with. Same 3" thickness, is taller (eg - it hangs lower) with lower outlet in the stock position.Here is a comparison of the two side by side. Both are very well built units, but I am going with the custom on the right.Anyone got a write up on the RK Unit install yet???Scott C. Link to comment Share on other sites More sharing options...
Mesoam Posted February 4, 2007 Report Share Posted February 4, 2007 send the RK one to me and i'll install it then send you instructions :) Link to comment Share on other sites More sharing options...
BlackT5 Posted February 4, 2007 Report Share Posted February 4, 2007 I haven't seen any instructions yet.What you'll probably have to do is fab a few little brackets to space the condenser forward. Link to comment Share on other sites More sharing options...
Guest 300+_T5R_855 Posted February 4, 2007 Report Share Posted February 4, 2007 Tow that pile of parts over to my shop and a bag of $$ and we'll finish that car before you're face down in the dirt. Link to comment Share on other sites More sharing options...
Über855R Posted February 4, 2007 Report Share Posted February 4, 2007 Tow that pile of parts over to my shop and a bag of $$ and we'll finish that car before you're face down in the dirt.I say that is your best bet. CJ is the man. As we all know... Link to comment Share on other sites More sharing options...
ultra_runner Posted February 4, 2007 Author Report Share Posted February 4, 2007 Tow that pile of parts over to my shop and a bag of $$ and we'll finish that car before you're face down in the dirt. No kidding!!! With my schedule it's on again, off again. Just think, 850s will be antiques by the time I get this project finished!Scott C. Link to comment Share on other sites More sharing options...
Evil E Posted February 5, 2007 Report Share Posted February 5, 2007 No kidding!!! With my schedule it's on again, off again. Just think, 850s will be antiques by the time I get this project finished!Scott C.850s are the new 240. :lol: Link to comment Share on other sites More sharing options...
Greenchunks Posted February 5, 2007 Report Share Posted February 5, 2007 i know like 10 of these were brought over, anyone got theirs in yet? Carson? Link to comment Share on other sites More sharing options...
Guest 300+_T5R_855 Posted February 5, 2007 Report Share Posted February 5, 2007 No kidding!!! With my schedule it's on again, off again. Just think, 850s will be antiques by the time I get this project finished!Scott C.Sh!t, gasoline will be outlawed. Link to comment Share on other sites More sharing options...
Mesoam Posted February 5, 2007 Report Share Posted February 5, 2007 Carson is too busy being down on himself :angry: Link to comment Share on other sites More sharing options...
NW T5R Posted February 5, 2007 Report Share Posted February 5, 2007 Both Carson and I have kits, had the bov flanges welded on, just got back the piping from Performance Coatings, both still have yet to install them. I am hoping to get mine in this month pending crazy schedule. Carsons will be easier since there is no condensor to deal with. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.