Deuss Posted March 31, 2007 Report Share Posted March 31, 2007 Ok well i have a problem with having loose conectors on the battery. SO everry once in a while i go to start my car and it is dead no signal whatsoever, so i go and disconect and reposition my terminals quickly and its fine. Well today its raining outside, I went to visit my mother..... i pulled behind her in the drive way... and 10 min later she had to leave so i went to move my car, and it is dead, same thing as always so i went open my hood reconected the battery terminals.... then i got the signal but my car wont start its just cranking and my lights are blinking as im doing it..... yet it wont start..... so she was in such a huge hurry that i let her get in the car and put it in neutural, and pushed it.... well lets say 2 of my rims that i just refinished and was going to take pics of today, have a huge ALL GLORY TO THE HYPNOTOAD curb hash that idiot slammed them in to the sidewalk as i was screaming to the top of my lungs to push on the brakes....despite me being pissed of at her what do you think is causing this-->>> My car wont start you can hear starter cranking and lights blinking... Link to comment Share on other sites More sharing options...
AlvinL Posted March 31, 2007 Report Share Posted March 31, 2007 One possibility that comes to mind...When you do have it running, do the terminals feel hot to the touch? If so, and the clamped connection is good, you may have a bad crimped-on terminal to the wire. Link to comment Share on other sites More sharing options...
Deuss Posted March 31, 2007 Author Report Share Posted March 31, 2007 well i cant start my car so i cant run it at the moment.. maybe its my coil? i dunne can rain has anything to do with it. i have a vent above the intake and i got some water inside not much but i closed the vent when i realized its raining. Link to comment Share on other sites More sharing options...
tca217 Posted March 31, 2007 Report Share Posted March 31, 2007 If you say your lights are flashing, to me that sounds like the factory anti theft/ alarm is on. Try disarming the alarm and see what happens, also make sure that all the battery cables and ground straps are clean and tight. Link to comment Share on other sites More sharing options...
Deuss Posted April 1, 2007 Author Report Share Posted April 1, 2007 its bat terminals i fixed the prob thanx guys. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.