Jump to content
Volvospeed Forums

One More Meet Before It Gets Cold


(n)A-GAME

Recommended Posts

  • Replies 54
  • Created
  • Last Reply

Start throwing around ideas, dates, etc...

Anyone want to host/attend a work day meet? I'd host but a parking garage is not ideal for this kind of thing :lol:

I've got a bunch of stuff to install... :ph34r:

best of luck with puttin this together man, im finding it is very difficult :lol: :D

Link to comment
Share on other sites

I might be up for a meet...would be great to celebrate finally getting my car back on the road after a loooong 11 months :)

Closer to Detroit / Troy area is better for me. Still not used to the idea of taking the car on a longer trip so soon after her 'operation'. Tryin to keep her close to home base in case of any catastrophic failures. But that may be overcautious...350 miles on the rebuild and nothing major has blown up <knock on wood>

Link to comment
Share on other sites

I'm down for this as long it's not in the next week or two...going to play some golf in Myrtle Beach for the week starting on Thursday.

Link to comment
Share on other sites

I might be up for a meet...would be great to celebrate finally getting my car back on the road after a loooong 11 months :)

Closer to Detroit / Troy area is better for me. Still not used to the idea of taking the car on a longer trip so soon after her 'operation'. Tryin to keep her close to home base in case of any catastrophic failures. But that may be overcautious...350 miles on the rebuild and nothing major has blown up <knock on wood>

What all did you do? rebuild or an actual build? i noticed some posts here and there from you but wasn't sure exactly what you ended up doing. Hows the trans?

-Mark

Link to comment
Share on other sites

What all did you do? rebuild or an actual build? i noticed some posts here and there from you but wasn't sure exactly what you ended up doing. Hows the trans?

-Mark

Basically just did a rebuild of the engine and turbo, and trans swap (auto for auto) Had a valve job done too. s60 R manifold, turbo back exhaust, IPD ECU (which i haven't put in yet...wanna get some more miles on it first).

It took so freakin long b/c i had started out planninng on just doing the trans swap and turbo rebuild....then i noticed my cylinder walls were worn a bit and the pistons too...so had to have it bored out and put new pistons in... at that point i figured it was best to do a full rebuild bearings and all... So had to have her off the road until i came up with the cash for all the other stuff that i hadn't originally budgeted for...

I still gotta put on a couple wheel bearings, and replace my rear suspension mounts. I'll probably wait til next year for it though...don't plan on driving it much in the winter so i'm not in a rush at this point.

The trans is holding up good so far . Although now i really wish that i would have judt done a 5 speed swap... didn't think i had the ability to do the swap when i started the project, but after rebuilding the engine...i'm pretty confident now :D

Link to comment
Share on other sites

Basically just did a rebuild of the engine and turbo, and trans swap (auto for auto) Had a valve job done too. s60 R manifold, turbo back exhaust, IPD ECU (which i haven't put in yet...wanna get some more miles on it first).

It took so freakin long b/c i had started out planninng on just doing the trans swap and turbo rebuild....then i noticed my cylinder walls were worn a bit and the pistons too...so had to have it bored out and put new pistons in... at that point i figured it was best to do a full rebuild bearings and all... So had to have her off the road until i came up with the cash for all the other stuff that i hadn't originally budgeted for...

I still gotta put on a couple wheel bearings, and replace my rear suspension mounts. I'll probably wait til next year for it though...don't plan on driving it much in the winter so i'm not in a rush at this point.

The trans is holding up good so far . Although now i really wish that i would have judt done a 5 speed swap... didn't think i had the ability to do the swap when i started the project, but after rebuilding the engine...i'm pretty confident now :D

Haha, yeah too bad about the 5 speed swap but that's cool about the rebuild, now i know if i decide to build my engine i can get some help from someone local B) . I doubt i will but who knows

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.


×
×
  • Create New...