Jump to content
Volvospeed Forums

Wobble Bolts And Hubcentricity


Recommended Posts

I'm looking at some wheels that are 5x110s and was wondering, if I used wobble bolts and hubcentric rings would I encounter any problems. I'm not sure if the wobbles bolts would make the wheel un-hubcentric. BTW, these are the wheels I'm looking at, don't flame too hard, I haven't decided if I want them yet.

I was also check out these, but they're 5x112. How much would it cost to get adapters made up?

Link to comment
Share on other sites

You can get adapters for under $200, but then you get offset problems because they are usually 20-30mm wide. I have not been able to find wobble bolts in the Volvo thread pitch. There are some people running 5x110 Saab wheels without wobble bolts and they haven't had any problems.

Link to comment
Share on other sites

Adapters alone should work, but yes, you're going to be sticking out a mile if the offset doesn't compensate for the adapters. And adapters should take care of the hubcentric issue.

Link to comment
Share on other sites

I heard wobble bolts will shear over time from someone on here.

I guess its possible, but not likely with proper hub bore on the wheels. I would love to find a set of wobbles. It would open up a whole new wheel selection.

G

Link to comment
Share on other sites

Well, unless other brands than Saab use 5x110 then the whole new wheel selection won't be that huge. They probably have less choice that we do don't they?

I assume the first pick isn't the actual wheels because that wheel is a 4 hole pattern.

Link to comment
Share on other sites

Well, unless other brands than Saab use 5x110 then the whole new wheel selection won't be that huge. They probably have less choice that we do don't they?

I assume the first pick isn't the actual wheels because that wheel is a 4 hole pattern.

Mucho wrongo. Look at the selection on tire rack for saabs. MUCH sexier then the volvo section including black Ultraleggeras. I would give a nut for those.;)

Borbet LV5

borbet_lv5_anth_ci3_l.jpg

Enkei EKM3

enkei_ekm3_gm_ci3_l.jpg

OZ Algerritas (16 lbs)

oz_allerghlt_anth_ci3_l.jpg

MMMMMMMM Ultraleggeras in black

oz_ultraleggera_mblk_ci3_l.jpg

SSR Type C

ssr_typec_rs_anth_ci3_l.jpg

G

Link to comment
Share on other sites

I heard wobble bolts will shear over time from someone on here.

I remember somebody said (in reference to Saab wheels fitted to a 850) that they could shear their bolts if they used 5x110 wheels on their 5x108 hub for too long.

BTW, what is our thread pitch?

Link to comment
Share on other sites

I remember somebody said (in reference to Saab wheels fitted to a 850) that they could shear their bolts if they used 5x110 wheels on their 5x108 hub for too long.

BTW, what is our thread pitch?

1.75?

G

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
×
×
  • Create New...