DScottM Posted November 20, 2014 Author Report Share Posted November 20, 2014 Well car is off the road for the winter now Miss it already... Part for the winter upgrades are slowly starting to accumulate! Single Mass Flywheel, Clutchnet Sprung 6-Puck Ceramic Disc, and a Cryo'd R Pressure Plate (Thanks Boxpin) Also picked up a minty set of herringbone dash trim. Only have pics of this piece for now. Cant wait to get this stuff in!! List of parts still needing to be acquired: TD04-HL 20T, GT-500 Injectors, angle flange downpipe, Pair of S60R Rear calipers, Front and rear 330mm slotted rotors, and lots of little stuff Looking forward to the winter project. Will keep the thread updated as things progress... 2 Quote Link to comment Share on other sites More sharing options...
Kevin. Posted November 20, 2014 Report Share Posted November 20, 2014 Yeah I know! Trying to decide what I want to do about that. I'm not huge on the OEM look... Thinking about trying something more aggressive looking but not sure what yet... Has anyone here done projector fogs on an S/V70 before?? get a set of stock fogs and add projectors to them, stealthy! Quote Link to comment Share on other sites More sharing options...
DScottM Posted February 9, 2015 Author Report Share Posted February 9, 2015 Small update. The parts list is expansive. May update with a full list of shit going on the car later if i have time. For now. A couple shots of a few things happening currently. Car is currently mid dash swap. Yay! Not.... Terrible pic my painter sent me of my R bumper i had him repaint along with filling the wiper holes.. These bad boys chilling waiting to go in.. 11/11 20T parts. Currently with Nick Knight getting assembled... Some detail work on stuff noone will see. Its fun tho... Will probably find some more stuff that can be glass blasted and painted as well Brake upgrade has been completely collected. The last piece of the setup is a set of 4 custom dimpled and slotted AR rotors. Which will be paired with Porsche Big Blacks for the front, and R calipers in the bacl, along with HAWK HPS pads... As soon as i get the interior put back together I will start on all the hardware installation. Gonna be a fun late winter early spring project! 2 Quote Link to comment Share on other sites More sharing options...
Timbo Slice Posted February 10, 2015 Report Share Posted February 10, 2015 Nice man, glad to see you posting some updates. I need to get down there and catch up with you sooner rather than later. Quote Link to comment Share on other sites More sharing options...
DScottM Posted February 10, 2015 Author Report Share Posted February 10, 2015 For sure dude! And you can give me back my spacers and work shirt! Hah!! Quote Link to comment Share on other sites More sharing options...
DScottM Posted February 11, 2015 Author Report Share Posted February 11, 2015 Winter Project Parts List Brakes: New Porsche Big Blacks w/ CJ Brackets (Thanks Gary!) Rear S60R Calipers w/ CJ Brackets Stainless Lines Front and Back Adams Rotors Dimpled and Slotted 330mm Rotors HAWK HPS Pads New E-Brake Hardware Clutch/PP/Flywheel Setup: Cryo'd 850R Pressure Plate (Thanks Boxpin) Clutchnet 6 Puck Ceramic Disc Lightened and Resurfaced Singe Mass Flywheel Turbo/Manifold/Fueling: TD04-HL 20T w/ 11 blade billet wheel and 11 blade turbine 7cm Angle Flange Housing R Exhaust Manifold GT500 550cc Injectors Interior: Full "Herringbone" Interior Trim Misc. Other Stuff: 540i MAF Snabb Delrin Shift Bushings Kaplhenke Delrin Subframe Bushings V70R Bumper AEM Wideband Devils Own Stage 2 WMI Beust/Aaron Tune Annual Full Tune Up: NGK Copper Plugs, Bosch Cap and Rotor, and Kingsbourne Wire Set Lots of misc. seals, gaskets, and maintenance stuff... I think that covers all the main stuff anyways. Probably missed something but that the bulk of it Quote Link to comment Share on other sites More sharing options...
Aequitas_Veritas Posted February 12, 2015 Report Share Posted February 12, 2015 Im gonna suggest not going Hawk HPS pads for the porsches, I had nothing but massive squeals from them. I have had good luck with Textar or Mintec Quote Link to comment Share on other sites More sharing options...
DScottM Posted February 12, 2015 Author Report Share Posted February 12, 2015 Hmm really? I already have them here sitting in the box. Guess I will give them a shot. I saw the Textar pads. Do they have the bite of the HPS? Quote Link to comment Share on other sites More sharing options...
Aequitas_Veritas Posted February 12, 2015 Report Share Posted February 12, 2015 Hawks had a bit more bite, but the noise drove me INSANE, not even close to worth the trade off. haha. I even bought the super expensive anti squeal dampeners that had zero effect. Quote Link to comment Share on other sites More sharing options...
DScottM Posted February 12, 2015 Author Report Share Posted February 12, 2015 Interesting. Well if they are too bad I will go a different route... Quote Link to comment Share on other sites More sharing options...
Aequitas_Veritas Posted February 12, 2015 Report Share Posted February 12, 2015 From what I have read its Textar that is OES for Porsche , although people disagree whether the pad they sell through aftermarket venders and through Porsche dealers are identical. But the aftermarkets I used worked well for me. Quote Link to comment Share on other sites More sharing options...
gmsgltr Posted February 12, 2015 Report Share Posted February 12, 2015 You have a great list of mods going on the car this winter/spring!I have some of those mods and will be completing some of the others at the same time - really excited for the maxed out 20t set up with plenty of fuel and metered air to bootFWIW I have Hawk Performance Ceramic on my bbk on four corners and have 0 complaintsThey are a little dustier than my akebono premiums on my previous 302 set up though 1 Quote Link to comment Share on other sites More sharing options...
DScottM Posted February 12, 2015 Author Report Share Posted February 12, 2015 Yep! Looking to push the 20T to its limits. Will be tuning for 93 and an E85 map... Should make some decent numbers... Quote Link to comment Share on other sites More sharing options...
Modman Posted February 13, 2015 Report Share Posted February 13, 2015 Yep! Looking to push the 20T to its limits. Will be tuning for 93 and an E85 map... Should make some decent numbers... I hope your gonna put use a larger maf housing. You'll need it to max out the 20T Quote Link to comment Share on other sites More sharing options...
DScottM Posted February 13, 2015 Author Report Share Posted February 13, 2015 540i MAF does happen to be listed in the upgrades list 2 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.