Jump to content
Volvospeed Forums

Made a na to turbo swap thought id share


Oliverscorsim

Recommended Posts

Iv been getting some data and doing expiriments to help all of us. Think our i5 are pretty great but this lack of easy way to tune isnt gonna fly. So far as a recap i started with a 2000 volvo s70 se. She was na and blew a hg. Fixed it happened again this time the bores didnt look too good so out she went and in came a b5254t out of a 06xc70. I got the car to run on the denso and slowly kept going with it. I also got it to run on my me7 and me9 via harness adapter. Started to work on a few ways to do this to answer the age old can i turbo swap question. In short yes and its easier than any of you would believe. The stock denso with alittle monkeyery to the car actually runs this thing perfect until 8-9psi then things get a bit lean but not scary until 13psi. I am working on the me7 and me9 aswell still just put them on the backburner for the simple fact that their too smart for their own good and im low on time these days. I have found (and i am in the early stages of testing.) That a power commander 5 that we use on motorcycles will work on the denso. Its cheap and i think i can get a speed density conversion with it. Read the link for details i just got referred here due to very little help on the other fourm. 

I do intend to sell a pnp set up if theres interest and down the road but i will be posting everything one needs to do it themselves so if anyone can chime in with some help in a few parts id be very grateful and the whole community would benifit. 

Anyone know how big na denso injectors are part number 3460? Iv been searching for awhile and im gonna just eat it and build a flow bench if no one knows but i really dont want too lol.

Check out my water injection kit its ugly but man it works (no intercooler or lag) and its cheap.

Before anyone asks yes all of this has been done on the cheap quick and dirty side. Im looking for answers not a show car.. Although i do have this other motor here with sleeves, rods, pistons,studs and a trans thats halfway together for awd swap a real awd swap not the haladex.. But first this is my dd and i enjoy the lack of attention it gets from local pd. Its gonna be a year or two before im going that far with it. For now im looking to make the electronics happy and have some fun. see whats the cheapest most attainable way to do this swap safely and make power is. Keeping in mind that it needs to be simple enough that anyone can do it. 

 

https://volvoforums.com/forum/volvo-s70-33/going-turbo-some-questions-100421/

 

Hope the link is okay promise ill make it less all over the place when i get to my next stopping point with the car. Im just messy 

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...