Jump to content
Volvospeed Forums

Chip Qustion


850Nate

Recommended Posts

I got my car chipped by speedtuning. They solder their program to the board/ecu or somthing. Well my car had that problem. Well my mechanic has the car and said "all the lines are fine." And is taking it to a place with a "computer to plug into the car." Will they find out the car is chiped? Because my dad will be pissed

Link to comment
Share on other sites

So wut could be wrong with the car. Hate to be so veg ,but he said the hoses intercooler/vac all look god. Wut happens when you throw a rod?

Basically what im asking. What are the possibilities of the car being toast?

ok first off you didnt throw a rod/bearing with 17psi on a chip. and second off you havent stated what the problem is. clunking noise? rattle? etc. we need more information

Link to comment
Share on other sites

sorry i forgot i started a new thread. I stated what happened in the old one. Well I got into the car 20mph kickdown. Went up through 1st gear. Let go off the gas and a POP-then a Woosshhhh noise.after that the car ran like crap. Vacumn gauge stayed the same as before. When i push the throttle the car take 2 seconds to react. Idles like crap until its warmed up

Link to comment
Share on other sites

Man it definitely sounds like you've got a big boost leak. Did you take a look at the turbo lines... it doesn't take a mechanic to see a hole in a hose. Just stick you're head under the hood and take a look for anything out of the ordinary.

:edit: 17 psi will not bend rods, but it will certainly blow up stock hoses.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...