Jump to content
Volvospeed Forums

Stylin' Silicone Hoses


RussB

Recommended Posts

I installed a set of the Stylin' Motor's silicone hoses on my car yesterday...

...I just want to say that there were no fitment issues with the dreaded "throttle body hose". All the hoses fit easily (with a little rubbing alchohol) Sig and crew seem to have it all sorted out :)

IPB Image

As a note, my vacuum at idle went up a bit more than 1"/hg, and is now at a solid 21"/hg. My old hoses were decrepid!

Open thought...Stylin' need to make a hose for the top side of the IAC valve to the plastic vacuum tree ;)

Link to comment
Share on other sites

Notice any differences in the way the car performs?

I did when I put mine on... that's because the turbo discharge had a hole the size of a dime in it. :o

Link to comment
Share on other sites

you need all you can get with a LPT car.

Well my 12PSI ST USA ecu upgrade was great @ 12PSI, then I had to get it redone due to the ETM software wiping it out. Oliver gave me the "Stronger" 12PSI program. It was boosting 12PSI fine.

I install the Stylin Turbo Hose's and I suddenly get 15PSI perfectly.

Link to comment
Share on other sites

Well my 12PSI ST USA ecu upgrade was great @ 12PSI, then I had to get it redone due to the ETM software wiping it out. Oliver gave me the "Stronger" 12PSI program. It was boosting 12PSI fine.

I install the Stylin Turbo Hose's and I suddenly get 15PSI perfectly.

congradulations.

fyi. it's still a 13g.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...