BlackT5 Posted January 22, 2007 Author Report Share Posted January 22, 2007 Wow that looks geat. What concerns me Is that I don't know how that compressor housing is going to clear the tranny mount thats below the turbo, even on my 16g I had to grind away at that mount and the compressor housing so that it will fit.It clears. I don't know how, but it clears Maybe the auto trans has a larger mount? because i'm almost certain that the S cover on the 35r is bigger than the 16g. Have you measured the diameter Ben? *also added a mods list on page 1 Quote Link to comment Share on other sites More sharing options...
narxs70 Posted January 24, 2007 Report Share Posted January 24, 2007 i was hoping i would get to see some progress on this build. good job and the manifold looks good. Quote Link to comment Share on other sites More sharing options...
TorqueSteer Posted January 24, 2007 Report Share Posted January 24, 2007 I havent mesured the diameter of the 16g, but ive held both my 16g and 35r in my hands and the 35r compressor housing is most certainly larger, the exhaust sides seemed about the same, but the turbine wheel on the 35r was most certainly larger.It clears. I don't know how, but it clears Maybe the auto trans has a larger mount? because i'm almost certain that the S cover on the 35r is bigger than the 16g. Have you measured the diameter Ben? *also added a mods list on page 1 Quote Link to comment Share on other sites More sharing options...
JoshV70 Posted January 24, 2007 Report Share Posted January 24, 2007 Hey Mark does the turbo clear the heater hoses. Can't remember if I asked you this already or not. Quote Link to comment Share on other sites More sharing options...
BlackT5 Posted January 24, 2007 Author Report Share Posted January 24, 2007 The turbo itself clears the heater hoses. I'm just not sure if i'll be able to run a 4" intake pipe, it might hit them. Going to have to buy a piece of 4" and try it. Quote Link to comment Share on other sites More sharing options...
JoshV70 Posted January 24, 2007 Report Share Posted January 24, 2007 The turbo itself clears the heater hoses. I'm just not sure if i'll be able to run a 4" intake pipe, it might hit them. Going to have to buy a piece of 4" and try it.Let me know. I am going to have a 4" inch intake pipe made, but was unsure if it would hit. Quote Link to comment Share on other sites More sharing options...
POOKDIZZLE Posted February 5, 2007 Report Share Posted February 5, 2007 What is this S^#T, now the spammers are threadjacking How is the project going Man, any new updates? Quote Link to comment Share on other sites More sharing options...
BlackT5 Posted February 5, 2007 Author Report Share Posted February 5, 2007 Waiting for the aluminum bends to show up. Probably won't be for a week or so. Quote Link to comment Share on other sites More sharing options...
narxs70 Posted February 5, 2007 Report Share Posted February 5, 2007 aluminum bends for the intake or the piping? Quote Link to comment Share on other sites More sharing options...
550 Posted February 5, 2007 Report Share Posted February 5, 2007 Im gonna say it is the piping kit for the IC Quote Link to comment Share on other sites More sharing options...
BlackT5 Posted February 5, 2007 Author Report Share Posted February 5, 2007 Piping for the IC.The intake pipe i'm going to get locally. I'm going to go buy a piece of 4" and see if it will fit. Quote Link to comment Share on other sites More sharing options...
BlackBeast Posted February 5, 2007 Report Share Posted February 5, 2007 What did you end up doing with the Climate Control Mark? You did say you were throwing it out. Quote Link to comment Share on other sites More sharing options...
BlackT5 Posted February 5, 2007 Author Report Share Posted February 5, 2007 Not throwing out the climate control. I'm throwing out the airpump though? Quote Link to comment Share on other sites More sharing options...
the ünderstüdy Posted February 5, 2007 Report Share Posted February 5, 2007 No joke, I don't have a giant arsenal of tools at my disposal I have a screw driver and a socket here and there... dont forget the bag of zip ties. Looking good Mark, that fitting looked like some nice nice work man. Quote Link to comment Share on other sites More sharing options...
BlackT5 Posted February 17, 2007 Author Report Share Posted February 17, 2007 w00tKinda wish I got black couplers, but it wasn't an option in the kit. blue>red Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.