prasamin Posted August 18, 2007 Report Share Posted August 18, 2007 wow, same bearings I got in mine.....crazy how you waited so long for a flywheel, and you're still ending up using what we all are using.....sucks to be you get that shit in there mofo! Link to comment Share on other sites More sharing options...
Gioseppe Posted August 18, 2007 Report Share Posted August 18, 2007 one word of advice man, do the input shaft bearing and seal, my bearing is going bad so it's good insurance when you are in there. Link to comment Share on other sites More sharing options...
Carbon_R Posted August 20, 2007 Author Report Share Posted August 20, 2007 Joe, thanks for the advice. I have a new spline seal/axle seals installed.The clutch came in on Saturday, thanks FEDEX Stock clutch compared to the SPEC stage 3+Pedals are in, took me about an hour Clutch pedalBrake pedalTomorrow is the shifter/linkage assembly and started working on the motor today.Raf Link to comment Share on other sites More sharing options...
Carbon_R Posted August 20, 2007 Author Report Share Posted August 20, 2007 wow, same bearings I got in mine.....crazy how you waited so long for a flywheel, and you're still ending up using what we all are using.....sucks to be you get that shit in there mofo!Yo, you dirtie hoe, why didn't you post the manufact. name/part # for them???It's all good on the flywheel, at least I can say, I TRIED!!!Did U Raf Link to comment Share on other sites More sharing options...
JHEIII874T5M Posted August 20, 2007 Report Share Posted August 20, 2007 :) Nice, nice, definitely curious to see how this turns out. Link to comment Share on other sites More sharing options...
Hellas850 T-5 Posted August 20, 2007 Report Share Posted August 20, 2007 Can you please give me an info about your new disc?Has it the small springs around the hub like the OEM has?Because if not,then it will make too much noise at idle or when you don't press the clutch.I had a familiar a disc custom made from COSWORTH 4X4 and made too much noise, Link to comment Share on other sites More sharing options...
Carbon_R Posted August 23, 2007 Author Report Share Posted August 23, 2007 Update;The box of goodies showed up last night and started to re-assemble the tranny Tonight, I'll bolt it back up and finalize the shifter linkages and install clutch master/slave cylinder..FYI; The M56 tranny spline seal comes in two sizes 41mm or 44mm, if you order one, Volvo will ship both to you because it doesn't specify which one on Vadis.. The part# on my 99 tranny is 1381798, the other one is 8675580.Raf Link to comment Share on other sites More sharing options...
matt b Posted August 23, 2007 Report Share Posted August 23, 2007 Nice progress. Looks good.PS: thin wires in both cases, I just got back from checking. So unless your MY differs from mine or Doug's: you're in good shape. Sorry it took so long. Link to comment Share on other sites More sharing options...
Boomin850 Posted August 24, 2007 Report Share Posted August 24, 2007 LMAO you asshat. I thought you weren't going to take a picture of the parts box. :P Link to comment Share on other sites More sharing options...
Carbon_R Posted August 24, 2007 Author Report Share Posted August 24, 2007 QUOTE(matt b @ Aug 23 2007, 01:51 PM) <{POST_SNAPBACK}>Nice progress. Looks good.PS: thin wires in both cases, I just got back from checking. So unless your MY differs from mine or Doug's: you're in good shape. Sorry it took so long.Thanks Matt LMAO you asshat. I thought you weren't going to take a picture of the parts box. Got to excited :lol: Link to comment Share on other sites More sharing options...
NW T5R Posted August 24, 2007 Report Share Posted August 24, 2007 Very Nice Raf, looks great so far . Seeing the pics is giving me good motivation. I need to get my 5 speed in especially since I now have 3 M56H's ready to go and a shit load of parts and volvo boxes.Mitch Link to comment Share on other sites More sharing options...
ViperVette Posted August 24, 2007 Report Share Posted August 24, 2007 mmm... quife. Looks illmatic man! Link to comment Share on other sites More sharing options...
matt b Posted August 24, 2007 Report Share Posted August 24, 2007 Very Nice Raf, looks great so far . Seeing the pics is giving me good motivation. I need to get my 5 speed in especially since I now have 3 M56H's ready to go and a shit load of parts and volvo boxes.MitchYou're about to get bombarded with requests to sell the spare transmissions. Someone (who'll remain nameless) on here sent me some nasty email about how I had no right to hoard manual transmissions.... :blink: Link to comment Share on other sites More sharing options...
Carbon_R Posted September 4, 2007 Author Report Share Posted September 4, 2007 Quick update; Finally got around to work on the car today. This past weekend I attended the harvest festival in Livermore and I had family over but they are gone now.I removed the half shafts, what a major *itch, the left side popped out with minor issues, the right side was a major "PITA", after beating on it for about 15 minutes plus spraying penetrant, it came off the hub!!!My back is sore but stoked to get this thing back on the road.This coming weekend, I'll rip the motor/tranny, swap the tranny and drop it back in. I hope to be done before the 16th. If you guys want pics for a to do swap, let me know of what?Raf Link to comment Share on other sites More sharing options...
Leo850T5 Posted September 4, 2007 Report Share Posted September 4, 2007 I always thought Doug's yellow was my favorite 850... Now i'm pretty sure this one is, black is just so badass and everything in your car looks prefect. Props to you, great job on the car. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.