Yea-but... Posted March 3, 2013 Report Share Posted March 3, 2013 Oil change in a white shirt. Idgaf. Also car wash, $10 touch less because I'm lazy and like the pretty soap colors. Link to comment Share on other sites More sharing options...
boxpin Posted March 3, 2013 Report Share Posted March 3, 2013 Down to the last line on the 20G then she is ready for the car. Link to comment Share on other sites More sharing options...
Dick Dastardly Posted March 3, 2013 Report Share Posted March 3, 2013 Finished my ipd sways and tki endlinks. Got it all figured out? Link to comment Share on other sites More sharing options...
rmorse Posted March 3, 2013 Report Share Posted March 3, 2013 Got it all figured out? Yup, I think. The sways hang below the LCAs. Rides OK, so I think it's fine. I'll post pictures in the thread over in the performance section later. Link to comment Share on other sites More sharing options...
Zappo Posted March 4, 2013 Report Share Posted March 4, 2013 Car is still up on jackstands, but progress is being made. More suspension work. The front camber is now -1.2 degrees at full positive at the camber plates, so I should be able to get -3 to -3.5 at the track with them at full negative. I also set the anti-sway bar to neutral since I was working on both sides at the same time. BOV was sticking, so I took it apart and cleaned it. Few things left to do before it is back on the ground. Link to comment Share on other sites More sharing options...
Mesoam Posted March 4, 2013 Report Share Posted March 4, 2013 Sat in it, said "don't worry I haven't forgot about you" Link to comment Share on other sites More sharing options...
goldponcho Posted March 4, 2013 Report Share Posted March 4, 2013 Went looking for clean paint, I think we did alright. I'll leave it up to one of the other guys to post a better pic. Happy Darren? Link to comment Share on other sites More sharing options...
quiksilver Posted March 4, 2013 Report Share Posted March 4, 2013 A bit better. I hate seeing dull cars, makes it seem like the owner doesn't care about it. Link to comment Share on other sites More sharing options...
survolvo Posted March 4, 2013 Report Share Posted March 4, 2013 Turbo off to shop for balancing. Link to comment Share on other sites More sharing options...
rmorse Posted March 4, 2013 Report Share Posted March 4, 2013 Finished my ipd sways and tki endlinks. Oh yea. Also changed out the front drivers wheel bearing on my girlfriend's 98 V70. Original wheel bearing, lasted 240k miles lol. Link to comment Share on other sites More sharing options...
gmsgltr Posted March 4, 2013 Report Share Posted March 4, 2013 Removed the 16T. Set it next to a K24 and took pictures. show us! Link to comment Share on other sites More sharing options...
vmzoller Posted March 5, 2013 Report Share Posted March 5, 2013 Installed the center console and the little 12V part in the back. 3/4 pieces done! The center dash piece will get done eventually lol... Link to comment Share on other sites More sharing options...
quiksilver Posted March 5, 2013 Report Share Posted March 5, 2013 Why the horrid steering wheel cover? Link to comment Share on other sites More sharing options...
vmzoller Posted March 5, 2013 Report Share Posted March 5, 2013 Why the horrid steering wheel cover? Because I haven't felt productive enough to get in there with a toothbrush and soapy water to clean the leather like someone else I know Good point though, that's the next thing I should do. Did you just use dish soap or something more specialized? Link to comment Share on other sites More sharing options...
quiksilver Posted March 5, 2013 Report Share Posted March 5, 2013 Because I haven't felt productive enough to get in there with a toothbrush and soapy water to clean the leather like someone else I know Good point though, that's the next thing I should do. Did you just use dish soap or something more specialized? I think I used armor all general cleaning spray, combined with an old toothbrush and a cup of water to clean the brush off in. Water is absolutely necessary, my toothbrush went from white to anthracite, even with water and cleaning after. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.